Operating Instructions

33
AUTO
OFF/ON
Ko...
Manjka daljinski upravljalnik oz. je prišlo do okvare
Izvedba sezonskega pregleda po dolgotrajni neuporabi
Naprav dolgo časa ne bom uporabljal
Indikatorji so preveč svetli




•
•
•
•
•
•
•
•
•
•
•
•
•
Slovensko
Odpravljanje napak
1.
2.
3.
4.
5.
Dvignite sprednjo ploščo.
Pritisnite na tipko za uporabo AUTO načina.
Ponovno pritisnite tipko, da napravo ugasnete.
Za zatemnitev ali ponastavitev svetlosti indikatorja pritisnite tipko
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
in jo držite
pritisnjeno 5 sekund.
Preverite baterije na daljinskem upravljalniku.
Preverite, da okrog zračnikov ni ovir.
Ugasnite napravo in jo izklopite iz električnega omrežja.
Odstranite baterije na daljinskem upravljalniku.
Neobičajen zvok med delovanjem.
Voda/tuji delčki so vstopili v daljinski upravljalnik.
Uhajanje vode iz notranje naprave.
Prekinjevalnik tokokroga se večkrat izklopi.
Napajalni kabel postane nenavadno vroč.
Stikala ali tipke ne delujejo pravilno.
UGASNITE NAPRAVO IN IZKLOPITE IZ ELEKTRIČNEGA OMREŽJA, nato se
posvetujte s pooblaščenim trgovcem, če naletite na naslednje:
Uporabite tipko za samodejni vklop/izklop in izberite COOL/HEAT. Po 15 minutah delovanja je
normalno, če so odstopanja med dovodom in izstopom zraka naslednja:
Aktivirajte način HEAT za 2-3 ure, da temeljito odstranite vlago, ki se je nabrala v notranjih
delih in tako preprečite nastajanje plesni.
Pritisnite in držite tipko, dokler ne slišite enega tona, nato izpustite in
naprava bo preklopila v prisilni COOL način.
Ponovite 3. korak. Pritisnite in držite tipko, dokler ne slišite dveh tonov,
nato izpustite in naprava bo preklopila v prisilni HEAT način.
COOL: ≥ 8 °C / 14,4 °F HEAT: ≥ 14 °C / 25,2 °F
KRITERIJI NEUPORABNOSTI