Manual

Your new TV Monitor/Receiver features a solid
state chassis that is designed to give you many
years of enjoyment, tt was thoroughly tested and
tuned at the factory for best performance.
Customer Record
The model and serial number of this product may
be found on the back of the unit. You should note
the model and serial number in the space provided
and retain as a permanent record of your
purchase. This will aid in identification in the event
of theft or loss.
Productregistrationisavailablefor U.S. customersat:
www.prodreg.com/panasonlo
Model
Number
Serial
Number
Care
and Cleaning
Screen (Turn TV Off)
Use a mild soap solution or window
cleaner with a soft clean cloth. DO NOT
USE ABRASIVE CLEANERS.
Avoid excessive moisture and wipe dry.
Cabinet and Remote Control
Use a soft cloth dampened with water or
a mild detergent solution. Do not use
benzene, thinner, or other petroleum
based cleaners.
Wipe dry with a soft clean cloth. Avoid
excessive moisture.
Specifications
Power Source
CT-13R4 CT-20G24
CT-13R30 CT-20G34
CT-13R40 CT-20R16
CT-20G4 CT-2Ol 3S
CT-20G14
CT-Z1427Z CT-Z2147Z
CT-Z2127Z
120V AC,
60Hz
Auto
(t10Vca-
220Vca);
5_6OHz
VHFo12;
Channel Capability - 181 UHF-56;
Cable-113
1V, p.l.p,
Video Input Jacks 75 Ohm,
(some models) Phono Jack
Type
Audio Input Jacks 500mV RMS
(some models) 47K Ohm
To Audio AMP Jack 0-2.0V RMS
(some models) 4.7K Ohm
Specifications are subject to chan _without notice
or obligation.
Television Location
This unit is intended to be used with an optional
stand or entertainment center. Consult your dealer
for available options.
[3 Avoid excessive sunlight or bright lights,
including reflections.
{3 Keep away from excessive heat or moisture.
Inadequate ventilation may cause internal
component failure.
{3 Fluorescent lighting may reduce Remote
Control transmitting range.
[3 Avoid magnetic equipment, including motors,
fans, or external speakers.
Optional Cable Connections
Shielded audio and video cables should be used
between components. For best results:
Use 75-ohm coaxial shielded cables.
Use appropriate input and output
connectors that match your component
connectors.
Avoid long cables to minimize
interference.
AC Power Supply Cord
CAUTION: TO PREVENT
ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET Polarizedplug
AND FULLY INSERT. DO
NOT USE A PLUG WITH A
RECEPTACLE OR OTHER Non-Polarizedplug,
OUTLET UNLESS THE
BLADE CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE. FOR SOME MODELS THAT
ARE NbN-POLARIZED, THE USE OF AN AC
ADAPTOR CONNECTOR MAY BE NECESSARY.
Batteries
Replace batteries in pairs.
Do not mix battery types (zinc carbon
with alkaline).
Do not recharge, shod-circuit,
disassemble, heat, or burn used
battehes,
Cable / Antenna
For proper reception, either a cable or antenna
connection are required.
Cable Connection
Connect the cable supplied by your local
cable company.
I
Incoming Cable from Cable Company
75 OhmsVHF/UHF
on backofTV
No_:
A cable converter box may be required
for proper reception. Check with your
local Cable company for compatibility
requirements.
-2-