Operating Instructions Air Conditioner Model No. Indoor Unit Outdoor Unit CS-E18NKUA CS-E24NKUA CU-E18NKUA CU-E24NKUA ENGLISH Before operating the unit, read these operating instructions thoroughly and keep them for future reference. QUICK GUIDE © Panasonic Appliances Air-Conditioning Malaysia Sdn. Bhd. 2012. Unauthorized copying and distribution is a violation of law.
SAFETY PRECAUTIONS Thank you for purchasing Panasonic Air Conditioner To prevent personal injury, injury to others, or property damage, please comply with the following. Incorrect operation due to failure to follow instructions below may cause harm or damage, the seriousness of which is classified as below: TABLE OF CONTENTS SAFETY PRECAUTIONS REMOTE CONTROL 4~5 The illustrations in this manual are for explanation purposes only and may differ from the actual unit.
WARNING REMOTE CONTROL Do not allow infants and small children to play with the remote control to prevent them from accidentally swallowing the batteries. POWER SUPPLY Do not use a modified cord, joint cord, extension cord or unspecified cord to prevent overheating and fire. To prevent overheating, fire or electric shock: • Do not share the same power outlet with other equipment. • Do not operate with wet hands. • Do not over bend the power supply cord.
REMOTE CONTROL Press the remote control’s button 1 • Please be aware of the OFF indication on the remote control display to prevent the unit from starting/stopping improperly. Maximum distance: 26ft 2 INDICATOR (Green) TIMER (Orange) QUIET (Orange) POWERFUL (Orange) 3 FAN SPEED AIR SWING 4 N 1 MODE 3 FAN SP EED TEMP QUIET 6 POWER 2 FUL AIR SWIN G 9 12 TO SELECT FAN SPEED (5 OPTIONS) FAN SPEED • For AUTO, the indoor fan speed is automatically adjusted according to the operation mode.
7 TO REACH TEMPERATURE QUICKLY • This operation stops automatically after 20 minutes. 8 Press and hold for 5 seconds to dim or restore the unit’s indicator brightness. 9 Press and hold for approximately 10 seconds to show temperature setting in °C or °F. 10 Press and hold for approximately 5 seconds to show 12-hour (am/pm) or 24-hour time indication. 11 Press to restore the remote control’s default setting. 12 Not used in normal operations.
INDOOR UNIT CAUTION • Switch off the power at the circuit breaker before cleaning. • Do not touch the aluminium fin, sharp parts may cause injury. CLEANING INSTRUCTIONS HINT • Do not use benzene, thinner or scouring powder. • Use only soap ( pH7) or neutral household detergent. • Do not use water hotter than 104°F. • To ensure optimal performance of the unit, cleaning maintenance has to be carried out at regular intervals. Dirty unit may cause malfunction and you may see error code “H99”.
TROUBLESHOOTING The following symptoms do not indicate malfunction. SYMPTOM CAUSE Mist emerges from indoor unit. Water flowing sound during operation. The room has a peculiar odor. ► • Condensation effect due to cooling process. ► • Refrigerant flow inside the unit. ► • This may be due to damp smell emitted by the wall, carpet, furniture or clothing. ► • This helps to remove the surrounding odours. Indoor fan stops occasionally during automatic fan speed setting.
INFORMATION FOR SEASONAL INSPECTION AFTER EXTENDED NON-USE • Check remote control batteries. • No obstruction at air inlet and air outlet vents. • Use Auto OFF/ON button to select Cooling/Heating operation. After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents: Cooling: ≥ 14.4°F Heating: ≥ 25.
MEMO
MEMO
MEMO
QUICK GUIDE Remote Control Preparation 1 2 3 4 5 6 TIMER ON 1 Pull out 2 Insert AAA or R03 batteries (can be used ~ 1 year) 3 Close the cover 4 Press CLOCK 5 Set time 6 Confirm SET 3 2 OFF CANCEL AC SET CHECK CLOCK 1 AUTO DRY 1 RC RESET MODE HEAT COOL AUTO HEAT COOL DRY Select the desired mode. FAN SPEED AIR SWING OFF/ON 2 2 MODE OFF/ON FAN SPEED 1 3 TEMP Start/stop the operation.