Operating Instructions Air Conditioner nanoeX Model No.
A new built-in Network Adaptor that allows you to control your heatpump from anywhere. Flexibility to connect Single Split System or Multi Split System Air Conditioner to suit your needs. For complete product features, please refer to catalogue. Use the remote control within 8 m from the remote control receiver on the indoor unit. Quick Guide Inserting the batteries B A Clock setting 2 A 3 1 1 Pull out the back cover of remote control. 2 Insert AAA or R03 batteries. 3 Close the cover.
Thank you for purchasing Panasonic Air Conditioner. Table of Contents Safety Precautions ……… 4-13 How to Use …………………14-15 To Learn More ………… 16-17 Cleaning the Air Conditioner ……………… 18 Troubleshooting ………… 19-22 Information …………………… 23 Accessories • Remote control • AAA or R03 batteries × 2 • Remote control holder • Screws for remote control holder × 2 The illustrations in this manual are for explanation purposes only and may differ from the actual unit. They are subject to change without notice.
Safety Precautions To prevent personal injury, injury to others or property damage, please comply with the following: Incorrect operation due to failure to follow instructions below may cause harm or damage, the seriousness of which is classified as below: This appliances is not intended for accessibility by the general public. WARNING This sign warns of death or serious injury. CAUTION This sign warns of injury or damage to property.
Power supply Do not use a modified cord, joint cord, extension cord or unspecified cord to prevent overheating and fire. To prevent overheating, fire or electric shock: • Do not share the same power outlet with other equipment. • Do not operate with wet hands. • Do not over bend the power supply cord. • Do not operate or stop the unit by inserting or pulling out the power plug.
Safety Precautions Remote control Do not use rechargeable (Ni-Cd) batteries. It may damage the remote control. To prevent malfunction or damage of the remote control: • Remove the batteries if the unit is not going to be used for a long period of time. • New batteries of the same type must be inserted following the polarity stated. Power supply Do not disconnect the plug by pulling the cord to prevent electric shock. WARNING This appliance is filled with R32 (mild flammable refrigerant).
• A logbook shall be maintained. The results of these checks shall be recorded in the logbook. • In case of ventilations in occupied spaces shall be checked to confirm no obstruction.
Safety Precautions 2. Servicing 2-1. Service personnel • The system is inspected, regularly supervised and maintained by a trained and certified service personnel who is employed by the person user or party responsible. • Ensure the actual refrigerant charge is in accordance with the room size within which the refrigerant containing parts are installed. • Ensure refrigerant charge not to leak.
2-7. Checks to the refrigerating equipment • Where electrical components are being changed, they shall be fit for the purpose and to the correct specification. • At all times the manufacturer’s maintenance and service guidelines shall be followed. • If in doubt consult the manufacturer’s technical department for assistance. • The following checks shall be applied to installations using flammable refrigerants.
Safety Precautions 3. Repairs to sealed components • During repairs to sealed components, all electrical supplies shall be disconnected from the equipment being worked upon prior to any removal of sealed covers, etc. • If it is absolutely necessary to have an electrical supply to equipment during servicing, then a permanently operating form of leak detection shall be located at the most critical point to warn of a potentially hazardous situation.
8. Removal and evacuation • When breaking into the refrigerant circuit to make repairs – or for any other purpose – conventional procedures shall be used. However, it is important that best practice is followed since flammability is a consideration. The following procedure shall be adhered to: remove refrigerant -> purge the circuit with inert gas -> evacuate -> purge with inert gas -> open the circuit by cutting or brazing. • The refrigerant charge shall be recovered into the correct recovery cylinders.
Safety Precautions 10. Decommissioning • Before carrying out this procedure, it is essential that the technician is completely familiar with the equipment and all its details. • It is recommended good practice that all refrigerants are recovered safely. • Prior to the task being carried out, an oil and refrigerant sample shall be taken in case analysis is required prior to re-use of recovered refrigerant. • It is essential that electrical power is available before the task is commenced.
• Do not mix refrigerants in recovery units and especially not in cylinders. • If compressors or compressor oils are to be removed, ensure that they have been evacuated to an acceptable level to make certain that flammable refrigerant does not remain within the lubricant. • The evacuation process shall be carried out prior to returning the compressor to the suppliers. • Only electric heating to the compressor body shall be employed to accelerate this process.
How to Use To adjust airflow direction (swing) nanoeX Upper direction (swing) Indicators POWER TIMER nanoeX • Do not adjust the flap by hand. * For details operation, refer “To Learn More....” Lateral direction: • For lateral direction, it is manually adjustable as shown. Lateral direction To adjust FAN SPEED and QUIET condition FAN SPEED: • When FAN AUTO is selected, the fan speed is adjusted automatically according to the operation mode. • Select the lowest fan speed to have a low noise operation.
See "To Learn More..." for details. To maximise comfort while sleeping • This operation provides you with a comfortable environment while sleeping. It will automatically adjust the sleep pattern temperature during the activation period. • The indoor unit indicator will dim when this operation is activated. This is not applicable if the indicator brightness has been manually dimmed. • This operation is incorporated with the activation timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
To Learn More... Single Single split system Multi Multi split system Operation mode • It is possible to operate the indoor units individually or simultaneously. The priority of operation is placed on the first unit that turned on. • During operation, HEAT and COOL modes cannot activate at the same time for different indoor units. • The power indicator blinks to indicate the indoor unit is standing by for different operation mode. AUTO : The POWER indicator blinks at the initial stage.
Operating conditions Use this air conditioner in the temperature range indicated in the table. COOL HEAT Single split outdoor unit *1 Multi split outdoor unit *2 Indoor Temperature °C (°F) DBT WBT DBT WBT DBT WBT Max. 32 (89.6) 23 (73.4) 43 (109.4) 26 (78.8) 46 (114.8) 26 (78.8) Min. 16 (60.8) 11 (51.8) -10 (14.0) - -10 (14.0) - Max. 30 (86.0) - 24 (75.2) 18 (64.4) 24 (75.2) 18 (64.4) Min. 16 (60.8) - -15 (5.0) -16 (3.2) -15 (5.0) -16 (3.
Cleaning the Air Conditioner Cleaning has to be carried out at regular intervals to ensure the unit is at optimal performance. A dirty unit may cause malfunction and you may retrieve “H 99” error code. Consult an authorised dealer. • Before cleaning, switch off the power supply and unplug the unit. • Do not touch the aluminium fin as the sharp parts may cause injury. • Do not use benzine, thinner or scouring powder. • Use soap ( pH 7) or neutral household detergent only.
Troubleshooting The following symptoms do not indicate malfunction. Symptom POWER indicator blinks before the unit is switched on. POWER indicator blinks during HEAT mode with no warm air supply (and flap is closed). POWER indicator blinks, then stops blinking during COOL/DRY mode. TIMER indicator is always ON. Operation is delayed a few minutes after restarting. Cooling/heating capacity is reduced during lowest fan speed setting.
Troubleshooting Check the following before calling for servicing. Symptom Check Operation in HEAT/COOL mode is not working • Set the temperature correctly. • Close all doors and windows. efficiently. • Clean or replace the filters. • Clear any obstruction at the air inlet and air outlet vents. Noisy during operation. • Check if the unit has been installed at an incline. • Close the front panel properly. Remote control does not work. • Insert the batteries correctly.
When... ■ The remote control is missing or a malfunction has occurred AUTO OFF/ON 1. Raise the front panel. 2. Press AUTO OFF/ON once to use in AUTO mode. 3. To operate forced COOL mode, press AUTO OFF/ON hold until you hear 1 beep, then release. (This operation shall be performed by service personnel) 4. To operate forced HEAT mode, repeat step 3. Press AUTO OFF/ON until you hear 2 beep, then release. (This operation shall be performed by service personnel) 5. Press AUTO OFF/ON again to turn off the unit.
Troubleshooting How to retrieve error codes If the unit stops and the TIMER indicator blinks, use the remote control to retrieve the error code. 1 Press for 2 Press until you hear beep 5 seconds sound, then write down the error code 3 Press for 5 Turn the unit off and 4 seconds to quit inform the error code to an checking authorised dealer. • For certain errors, you may restart the unit for limited operation if there are 4 beeps when operation starts.
Information Information for Users on Collection and Disposal of Old Equipment and Used Batteries Pb These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
Manufactured by: Panasonic Corporation 1006, Oaza Kadoma, Kadoma City, Osaka 571-8501, Japan Importer: Panasonic Marketing Europe GmbH Authorized Representative in EU: Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Website: http://www.panasonic.
