ideas for life Amplifier Built-in Compact Photoelectric Sensor CX-400 SERIES Ver.2 Conforming to EMC Directive UL Recognition World Standard Upgraded to Increase Usability Achieving low power consumption and high noise-resistance 2010.11 panasonic-electric-works.
The world standard CX-400 series Sensors that are environmentally and user friendly. The total lineup of 148 models covers through the inclusion of a newly developed custom integrated circuit. This CX-400 series upgrade achieves a significantly higher reliability in the same package as the older model.
1 Upgrade Reducing environmental burdens further Up to 60% less power consumption Upgrade for up to 60% reduction The CX-400 series achieves reductions in power consumption of up to 60%, averaging 44% reduction when upgrading due to its unique design. These sensors reduce carbon emissions and contribute to environmental friendliness. Previous CX-482 25 mA New CX-482 10 mA Contributing to reduced carbon dioxide emissions Electricity consumed by the CX-400 series has been reduced on average 10.5 mA.
Thru-beam type Applications Detecting box collapsing within the rail of stacker crane CX-411: 10 m 32.808 ft CX-412: 15 m 49.213 ft CX-413: 30 m 98.425 ft Strong infrared beam Strong in dust and dirt CX-412/413 CX-412/413 Remarkable penetrating ability enables applications such as package content detection come into practice. (Note) CX-413 The infrared light source is strong in dust and dirt compared to the red beam type.
Diffuse reflective type Applications Detecting pins in the case CX-422: 800 mm 31.496 in CX-421: 300 mm 11.811 in CX-424: 100 mm 3.937 in CX-423: 70 to 300 mm 2.756 to 11.811 in Narrow-view type 100 mm 3.937 in approx. CX-423 Spot diameter ø2.2 mm 0.087 in approx. Beam axis alignment made easy with a high luminance spot beam CX-423 These sensors have a high luminance red LED spot beam which provides bright visibility enabling the sensing position to be checked at a glance.
Adjustable range reflective type CX-442 CX-444 CX-441 CX-443 1.5 times longer than before 300 mm 11.811 in 100 mm 3.937 in 50 mm 1.969 in Spot diameter ø2 mm ø0.079 in approx. 50 mm 1.969 in Spot diameter ø6.5 mm ø0.256 in approx. High precision type CX-441/443 Can sense height differences as small as 0.4 mm 0.016 in, with hysteresis of 2 % or less Hardly affected by colors An advanced optical system provides sensing performance that is approx. 2.5 times than conventional models.
BGS / FGS functions make even the most challenging settings possible! The FGS function is best suited for the following case The BGS function is best suited for the following case Background not present BGS FGS When object and background are separated Background present When object and background are close together When the object is glossy or uneven Not affected if the background color changes or someone passes behind the conveyor.
ORDER GUIDE Standard type Type Appearance Model No. (Note 1) Sensing range Thru-beam 15 m 49.213 ft 30 m 98.425 ft CX-411 CX-411-P CX-412 CX-412-P CX-413 CX-413-P CX-491 CX-491-P CX-493 CX-493-P 50 to 500 mm 1.969 to 19.685 in (Note 2) CX-481 CX-481-P 50 to 1,000mm 1.969 to 39.37 in (Note 2) CX-483 CX-483-P CX-482 CX-482-P CX-424 CX-424-P CX-421 CX-421-P CX-422 CX-422-P CX-423 CX-423-P CX-441 CX-441-P CX-443 CX-443-P CX-444 CX-444-P CX-442 CX-442-P 3 m 9.
ORDER GUIDE Basic type (Without operation mode switch and sensitivity adjuster. Cable is 0.5 m 0.02 in long) Type Appearance Sensing range Model No.(Note 1) NPN output PNP output Output operation CX-411A-C05 CX-411A-P-C05 Light-ON CX-411B-C05 CX-411B-P-C05 Dark-ON CX-412A-C05 CX-412A-P-C05 Light-ON Long sensing range Retroreflective Red LED 15 m 49.213 ft With polarizing filters Thru-beam 10 m 32.808 ft Emitting element 3 m 9.
ORDER GUIDE 0.5 m 1.640 ft / 5 m 16.4 ft cable length types 0.5 m 1.640 ft / 5 m 16.404 ft cable length types (standard: 2 m 6.562 ft, basic: 0.5 m 1.640 in) are also available. When ordering this type, suffix “-C05” for the 0.5 m 1.640 ft cable length type, “-C5” for the 5 m 16.404 ft cable length type to the model No. (Excluding CX-44 and basic type.) (e.g.) 0.5 m 1.640 ft cable length type of CX-411-P is “CX-411-P-C05” 5 m 16.
OPTIONS Model No. Designation Slit mask Sensor Slit size CX-411 OS-CX-05 CX-412 ø0.5 mm ø0.020 in CX-413 Round slit mask ( For thrubeam type sensor only ) CX-412 ø1 mm ø0.039 in CX-413 CX-411 OS-CX-2 CX-412 ø2 mm ø0.079 in CX-413 CX-411 OS-CX-05×6 Rectangular slit mask ( ) For thrubeam type sensor only OS-CX-1×6 OS-CX-2×6 Min. sensing object Slit on both sides 400 mm 15.748 in 20 mm 0.787 in 600 mm 23.622 in 30 mm 1.181 in 900 mm 35.433 in 100 mm 3.937 in 1.35 m 4.
OPTIONS Reflector mounting bracket Designation Model No. MS-RF21-1 Reflector mounting bracket For RF-220 MS-RF23 For RF-230 • Sensing range (Note 4): • Ambient temperature: -25 to +50 °C -13 to +122 °F 0.5 m 1.640 ft [CX-491 ] 0.8 m 2.625 ft [CX-493 ] • Ambient humidity: 35 to 85 % RH Notes: 1) Keep the tape free from stress. If it is pressed too • Sensing range (Note 4): much, its capability may 0.7 m 2.297 ft [CX-491 ] deteriorate. 1.2 m 3.937 ft [CX-493 ] 2) Do not cut the tape. It will 0.1 to 0.
SPECIFICATIONS Standard type Thru-beam Model No. Type Item Retroreflective Narrow-view NPN output CX-411 CX-412 CX-413 CX-491 CX-493 CX-481 CX-483 CX-482 CX-424 CX-421 CX-422 CX-423 PNP output CX-411-P CX-412-P CX-413-P CX-491-P CX-493-P CX-481-P CX-483-P CX-482-P CX-424-P CX-421-P CX-422-P CX-423-P 15 m 49.213 ft 30m 98.425 ft 3 m 9.843 ft 5 m 16.404 ft 50 to 500 mm 50 to 1,000mm 0.1 to 2 m 100 mm 300 mm 800 mm 70 to 200 mm 1.969 to 19.685 in (Note 2) 1.969 to 39.37 in (Note 2) 0.328 to 6.
SPECIFICATIONS Standard type Model No. Type Item Adjustable range reflective Small spot NPN output CX-441 CX-443 CX-444 CX-442 PNP output CX-441-P CX-443-P CX-444-P CX-442-P Adjustable range (Note 2) 20 to 50 mm 0.787 to 1.969 in 20 to 100 mm 0.787 to 3.937 in 40 to 300 mm 1.575 to 11.811 in Sensing range (with white non-glossy paper) 2 to 50 mm 0.079 to 1.969 in 15 to 100 mm 0.591 to 3.937 in 20 to 300 mm 0.787 to 11.
SPECIFICATIONS Basic type Thru-beam Retroreflective Model No. Type Item Long sensing range With polarizing filters Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON NPN output CX-411A-C05 CX-411B-C05 CX-412A-C05 CX-412B-C05 CX-491A-C05-Y CX-491B-C05-Y PNP output CX-411A-P-C05 CX-411B-P-C05 CX-412A-P-C05 Sensing range 10 m 32.808 ft CX-412B-P-C05 CX-491A-P-C05-Y CX-491B-P-C05-Y 15 m 49.213 ft ø12 mm ø0.472 in or more opaque object (Note 3) Sensing object 3 m 9.
I/O CIRCUIT AND WIRING DIAGRAMS NPN output type I/O circuit diagram Wiring diagram Color code / Connector pin No. of the connector type Sensor circuit Brown (Brown / 1) +V D Tr Load (Black / 4) Output (Note 1) D + ZD – 100 mA max.
PRECAUTIONS FOR PROPER USE • Do not run the wires together with high-voltage lines or power lines or put them in the same raceway. This can cause malfunction due to induction. • Extension up to total 100 m 328.084 ft (thru-beam type: both emitter and receiver) is possible with 0.3 mm2, or more, cable. However, in order to reduce noise, make the wiring as short as possible. • Make sure that stress by forcible bend or pulling is not applied directly to the sensor cable joint.
The CAD data in the dimensions can be downloaded from the website: panasonic-electric-works.net/sunx DIMENSIONS (Unit: mm in) CX-41 -J Sensor Sensitivity adjuster (Note 1) Operation mode switch (Note 1) 11.8 0.465 Beam-receiving part ( 2.3 0.091 7.85 0.309 3.95 0.156 ) M12 connector 44 (1.732 ) Operation mode switch (Note 1) 20 0.787 3 0.118 11.2 0.441 Center of sensing 4 0.157 15.5 0.610 31 25.4 1.220 1.000 Sensor Stability indicator (Green) 20 0.787 3 0.
The CAD data in the dimensions can be downloaded from the website: panasonic-electric-works.net/sunx DIMENSIONS (Unit: mm in) RF-230 RF-220 Reflector (Accessory for the retroreflective type sensor) RF-210 Reflector (Optional) Reflector (Optional) 33.3 1.311 50.3 1.980 12.8 0.504 35.3 1.390 M3 nut mounting holes (for mounting at the back) Reflector 49.3 59.3 1.941 2.335 10 0.394 11 0.433 34.3 42.31.350 1.665 30 (1.181 ) ( 8 0.315 5 0.197 ) Base 3.2 0.126 4 0.157 3.3 0.130 40 1.575 21 0.
The CAD data in the dimensions can be downloaded from the website: panasonic-electric-works.net/sunx DIMENSIONS (Unit: mm in) MS-CX2-2 Sensor mounting bracket (Optional) 14 0.551 15.8 0.622 22 0.866 14 0.551 36 1.417 Assembly dimensions 7 0.276 7.8 0.307 Mounting drawing with the receiver of CX-41 8-ø3.4 ø0.134 holes 15.8 0.622 8.2 0.323 ( 3.6 0.142 ) 25 10 0.394 0.984 55 2.165 25.4 1.000 Beam axis 14˚ 28 1.102 7 0.276 4.5 0.177 t2 t 0.079 36 1.417 55 2.165 23 15.5 0.906 0.
The CAD data in the dimensions can be downloaded from the website: panasonic-electric-works.net/sunx DIMENSIONS (Unit: mm in) MS-CX-3 Sensor mounting bracket (Optional) Assembly dimensions t 1.2 t 0.047 30 1.181 20.5 0.807 10° R25 R0.984 14 0.551 8 3.4 0.315 0.134 6 0.236 3.5 0.138 5 3.4 0.197 0.134 25.2 0.992 13.6 0.535 11.2 0.441 8.5 0.335 3.4 0.134 35 25 0.984 1.378 0.5 0.020 Mounting drawing with the receiver of CX-41 18 0.709 6 0.236 3.4 0.134 10° 5 15 0.197 0.
The CAD data in the dimensions can be downloaded from the website: panasonic-electric-works.net/sunx DIMENSIONS (Unit: mm in) MS-RF23 Reflector mounting bracket for RF-230 (Optional) Assembly dimensions 40 1.575 4.5 0.177 3 (0.118 ) 40 1.575 4.5 0.177 10 0.394 11 0.433 10 0.394 28.3 19.3 1.114 0.760 50 1.969 40 1.575 50.3 1.980 5 0.197 8.3 0.327 16 0.630 15 0.591 61 2.402 35 1.378 18 0.709 12 0.472 t2 t 0.079 ( 7 0.276 26 1.024 28 1.102 3 (0.118 ) ( 30 (1.181 ) ) t2 t 0.079 10 0.
The CAD data in the dimensions can be downloaded from the website: panasonic-electric-works.net/sunx DIMENSIONS (Unit: mm in) MS-AJ1-A Universal sensor mounting stand (Optional) 16.5 0.650 28.45 1.120 210 8.268 (134 5.276) (Note 1) 12 0.472 6 0.236 ( ) 33 1.299 4.2 ø10 ø0.394 pipe 0.165 [Stainless steel (SUS304)] Cable guide (POM) Sensor mounting bracket [Stainless steel (SUS304)] (Note 2) Arm joint (Nylon 6) 147 2-ø3.2 ø0.126 5.787 mounting holes ø10 ø0.
Protecting the environment is one of our guiding business principles Promoting a totally lead-free ISO 14001 environmental management working environment Using simple packaging system certification acquired We are now working to eliminate the use of lead in all our in-house manufacturing processes such as in reflow ovens, hand soldering and parts and substrates procurement. Please contact .......... Simple, environmentally friendly packaging material reduces waste.
