Installation Manual

22
6 USING THE SYSTEM
6.3.2 Setting the date, cut-off date, and distribution ratio calculation
method
Use this screen to set the current date and time, and make settings related to time.
These settings are needed for program timers and distribution ratio calculation, so be sure to
make them before starting operation of the system.
Procedure
Select 5.Initial settings in the main menu and 1.Date/Distrib. in the sub menu, then proceed
as follows.
A
Set the current date and time.
Under “(1) Current time”, select the current year, month, day, hour, minute, and second from
the drop-down lists(
).
The day of the week is shown automatically.
Press the Set button to set the settings.
B
Set the monthly cut-off day.
Under “(2) Cut-off day”, select a number from 1 to 28 or End (to select the last day of the
month) from the drop-down list(
).
If the time set is ahead of the current time, the program timer set in that period becomes
invalid and transmission is not performed.
Main
Sub
1
1
5
5
1
2
3
4
5
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
1.Date/Distrib.
2.CNTR/Unit/Ten. No.
3.Ten. name/Distrib. Gr.
4.Pulse meter setting
5.Clear accum. data
CZ-256ESMC1U_改.indb 22CZ-256ESMC1U_改.indb 22 2011/11/11 11:25:162011/11/11 11:25:16