Installation Manual

44
6 USING THE SYSTEM
Main
Sub
2
2
5
5
F
When a window like the one shown below
appears, touch the Check button.
6.5.5.2 Saving data
Proceed as follows to back up setting data and totals data to optional PC Cards.
Procedure
Complete the cut-off processing described in “6.5.5.1 Manual cut-off processing” and then
execute the following backup procedure.
D
Insert a PC card and touch the Backup button.
E
When a window like the one shown below
appears, touch the OK button.
* When keeping the PC card inserted in a unit, data therein are automatically backed up once a day (at
every 0 o’clock at midnight).
6.5.5.3 Outputting distribution data in progress
Save distribution data (total data) in progress before cut-off processing in PC cards (optionally
available) following the procedure stated below.
Procedure
G
Insert a PC card and touch the Distrib. dt out button.
H
When a screen like the one shown below appears, touch the OK button.
As data output by pressing the Distrib. dt out button are strictly in progress, it is impossible
to apply these data for cut-off processing for the tenant who leaves halfway. (Manual cut-off
processing is necessary).
CZ-256ESMC1U_改.indb 44CZ-256ESMC1U_改.indb 44 2011/11/11 11:25:292011/11/11 11:25:29