User manual
Table Of Contents
- Finding the information you need
- How to use this manual
- Contents
- Contents by Function
- 1. Before Use
- 2. Getting Started/Basic Operations
- 3. Recording Modes
- Taking Pictures using the Automatic Function (Intelligent Auto Mode)
- Taking Pictures with Automatically Adjusted Aperture and Shutter Speed (Programme AE Mode)
- Taking picture by setting the exposure manually (Manual Exposure Mode)
- Taking Pictures with different image effects (Creative Control Mode)
- Taking Pictures that match the Scene being recorded (Scene Guide Mode)
- Take the Outdoors Scene Expressively
- Taking panorama pictures (Panorama Shot Mode)
- 4. Focus, Brightness (Exposure) and Colour tone Settings
- 5. 4K Photo and Drive Settings
- 6. Stabiliser, Zoom and Flash
- 7. Recording Motion Pictures
- 8. Sensor
- 9. Playing Back and Editing Images
- 10. Using Menu Functions
- 11. Using the Wi-Fi function
- 12. Connecting to other equipment
- 13. Others
161
11. Using the Wi-Fi function
Sending images to a smartphone/tablet
Preparations:
• Install the “Image App” in advance. (P151)
1
Select the menu.
2
Press 3/4 to select the connection method, and then press [MENU/
SET].
• WPS is a function that allows you to easily set up a connection with a wireless LAN
device and make security-related settings. To check whether your smartphone supports
the function, refer to the operating instructions of the smartphone.
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
[Send Images While Recording] or [Send Images Stored in the
Camera] > [Smartphone] > [Direct]
[WPS Connection]
[WPS (Push-Button)]
1 On the camera screen, press 3/4 to select [WPS
(Push-Button)], and then press [MENU/SET].
2 Set the smartphone to the WPS mode.
• You can wait longer for a connection by pressing [DISP.] on
the camera.
3 On the smartphone, start “Image App”. (P151)
[WPS (PIN code)]
1 On the camera screen, press 3/4 to select [WPS (PIN
code)], and then press [MENU/SET].
2 Enter the PIN code of the smartphone into the camera.
3 On the smartphone, start “Image App”. (P151)
[Manual
Connection]
Operate the smartphone.
1 Turn on the Wi-Fi function.
2 Select the SSID A that
matches the one displayed on
the screen of this unit.
3 Start “Image App ”. (P151)
MENU
Select [Wi-Fi] of [Settings] from
smartphone. Please connect to
the following.