User's Manual

Table Of Contents
105
4. Focus, Brightness (Exposure) and Color tone Settings
Applicable modes:
You can move the AF area displayed on the viewfinder by
touching the monitor.
Press the shutter button halfway to determine the focus position.
To return the focus position to the center, press [DISP.] before determining the position. Press it
again to reset the size to the initial setting.
To cancel the AF area setting when [š], [ ] or [ ] is selected, press [MENU/SET].
Specifying the AF area position with the Touch Pad
> [Custom] > [Operation] > [Touch Settings] > [Touch Pad AF]
[EXACT]
Moves the AF area of the
Viewfinder by touching a
desired position on the Touch
Pad.
[OFFSET1] -
[OFFSET7]
Moves the AF area of the
viewfinder according to the
distance you drag the touch
pad.
Operation area can be
selected from 7 areas.
Settings:
[OFFSET1] (all areas)
[OFFSET2] (right half)
[OFFSET3] (upper right)
[OFFSET4] (lower right)
[OFFSET5] (left half)
[OFFSET6] (upper left)
[OFFSET7] (lower left)
Example: When set to [OFFSET1]
[OFF]
[Touch Pad AF] is not available in the following cases:
When [4K Live Cropping] is set
When [Pull Focus] in [Snap Movie] is set to [ON]
MENU