User's Manual

4. Focus, Brightness (Exposure) and Color tone Settings
116
3
Press [ ] to set.
• You can also press the shutter button halfway to set.
[]/[]/
[]/[]
A white object is recorded to set the White Balance.
This is convenient for recording under multiple light
sources.
1 Press
3.
2 Place a white object such as a piece of paper
within the frame at the center of the screen, and press [MENU/
SET].
• This will set the White Balance and return you to the recording screen.
• White Balance may not be set when the subject is too bright or too dark.
Set the White Balance again after adjusting to appropriate brightness.
[]/[]/
[]/[]
Set the White Balance Color Temperature to suit the
light source.
1 Press 3.
2 Press 3/4 to select the color temperature and
then press [MENU/SET].
• You can set a color temperature from [2500K] to [10000K].
Under fluorescent lighting, LED lighting fixture etc., the appropriate White Balance
will vary depending on the lighting type.
Use [AWB], [AWBc], [AWBw], [ ], [ ], [ ] or [ ].
• If you take pictures with the flash outside the available flash range, the correct White Balance
may not be obtained.
• During Scene Guide Mode:
– Settings are adjusted to suit each scene.
– Changing the scene or Recording Mode will return White Balance settings (including the
White Balance fine-adjustment setting) to [AWB].
1 2
3
4
1
2
3
4
5500K5500K5500K
1
2 3
4