User's Manual

5. 4K Photo and Drive Settings
128
Selecting pictures from 4K burst file
1
Select an image with the [ ] icon on the playback
screen, and press 3.
• You can also perform the same operation by touching the icon [ ].
• If the image was recorded with [4K Pre-Burst], proceed to step
3.
3
Drag the frames to select the frame you want
to save as a picture.
• You can also perform the same operation by pressing
2/1.
• To continuously rewind/forward frame-by-frame, touch
and hold [ ]/[ ].
4
Touch [ ] to save the picture.
• The picture will be saved in JPEG format.
∫ [4K PHOTO Bulk Saving]
You can save any 5-second period of pictures from a 4K burst file all at once.
1 Select the menu.
2 Press 2/1 to select the 4K photo burst files and press [MENU/SET].
• If the burst time is 5 seconds or less, all frames will be saved as pictures.
3 Select the first frame of the pictures to be saved at once.
• Select the frame in the same way as you select pictures from a 4K burst file.
• Pictures will be saved as a group of Burst Mode pictures in JPEG format. (P189)
2
Drag the slide bar to make a rough selection
of scenes.
• For information on how to use the slide view screen, refer
to P129.
• You can select its scenes on the 4K burst playback
screen by touching [ ] (Fn1). (P130)
• Touching [ ] allows you to switch to the marker
operation screen. (P131)
Slide view screen
• The picture will be saved with recording information (Exif information), including its shutter
speed, aperture and ISO sensitivity information.
• 4K burst files saved on a PC will be treated as MP4 motion pictures.
> [Playback] > [4K PHOTO Bulk Saving]
Fn1
AUTO
MODE
AUTO
AUTO
AUTO
MENU