User's Manual

133
5. 4K Photo and Drive Settings
Post Focus Recording
Applicable modes:
The camera allows you to take 4K burst pictures while shifting the focus to different areas.
After taking these pictures, you can select the desired focus area.
This function is suited for recording still objects.
• Use a UHS Speed Class 3 card.
• We recommend that you use a tripod when recording images to be used for Focus Stacking.
1
Set the drive mode dial to [ ].
2
Decide on the composition, and press the
shutter button halfway.
• AF will detect focus areas on the screen. (Excluding the
edges of the screen)
• While the shutter button is pressed and held halfway, shake may be seen on the screen.
• If no areas on the screen can be brought into focus, the focus display (
A
) will flash.
Recording is not possible in this case.
4K burst recording while
automatically shifting the
focus.
Touch the desired focus
point.
A picture with the desired
focus point is made.
From the time you press the shutter button halfway until the end of recording:
• Maintain the same distance to the subject and the same composition.
4K
4:3