User's Manual

9. Menu Guide
216
This moves the AF area or MF Assist using the cursor button when recording.
Set whether to give priority to focus or shutter release during AF.
• Different settings can be applied to different Focus Mode settings ([AFS/AFF], [AFC]).
Focus positions are stored separately for the camera's horizontal and vertical orientations.
When setting the AF area position or the MF Assist display position, you can now loop the
position from one edge to the other edge of the screen.
[Direct Focus Area]
• You can move the positions below with the cursor button.
– When [š]/[ ]/[ ]/[Ø] is selected: AF area
– When [ ] is selected: lock-on position
– When [ ] is selected: enlarged area
• Use the Quick Menu (P58) or Fn buttons (P60) to use the functions assigned to the cursor
button, such as AF Mode selection.
• [Direct Focus Area] is fixed to [OFF] in the following case:
– [Glistening Water] (Scene Guide Mode)
– Creative Control Mode
– When [4K Live Cropping] is set
[Focus/Release Priority]
[FOCUS] Disables recording when focus is not achieved.
[BALANCE]
Performs recording while controlling the balance between focusing and
shutter release timing.
[RELEASE] Enables recording even when focus is not achieved.
[Focus Switching for Vert / Hor]
[ON]
Memorizes separate positions for horizontal
and vertical orientations (two vertical
orientations, left and right, are available).
• The following last-specified positions will be
memorized.
– The last AF area position (when [ ], [Ø] or [ ] is used)
– The last MF Assist display position
[OFF] Sets the same setting for both horizontal and vertical orientations.
[Loop Movement Focus Frame]