User's Manual
Table Of Contents
- Contents
- 1. Before Use
- 2. Getting Started/Basic Operations
- Attaching the Shoulder Strap
- Charging the Battery
- Inserting the Card (Optional)
- Card Information
- Attaching a Lens
- Changing the Monitor Position
- Setting the Clock (When Turning On for the First Time)
- Basic Operations
- How to Hold the Camera
- Using the Viewfinder
- Shutter button (Taking pictures)
- Motion picture button (Recording motion pictures)
- Mode dial (Selecting a Recording Mode)
- Front Dial/Rear Dial
- Control Dial
- Cursor buttons/[MENU/SET] button
- [DISP.] button (switching the information display)
- Touch screen (Touch operations)
- Taking Pictures Using the Touch Function
- Setting menu items
- Quick Menu
- Fn Buttons
- Entering Text
- 3. Recording Modes
- 4. Focus, Brightness (Exposure) and Color tone Settings
- 5. 4K Photo and Drive Settings
- 6. Stabilizer, Zoom and Flash
- 7. Recording Motion Pictures
- 8. Playing Back and Editing Images
- 9. Menu Guide
- 10. Using the Wi-Fi/Bluetooth function
- What you can do with the Wi-Fi®/Bluetooth® function
- Wi-Fi function/Bluetooth function
- Connecting to a smartphone
- Operating the Camera with a Smartphone
- Displaying pictures on a TV
- Sending images from the camera
- Sending images to a smartphone
- Printing Wirelessly
- Sending images to AV device
- Sending images to PC
- Using Web services
- Wi-Fi connections
- [Wi-Fi Setup] Menu
- 11. Connecting to other devices
- 12. Others
231
9. Menu Guide
This is a function to automatically turn the camera to sleep (power save) status or turn off
the viewfinder/monitor if no operation is performed for a set time. Reduces battery
consumption.
[Economy]
[Sleep Mode] Sets the amount of time until the camera is put into sleep.
[Sleep
Mode(Wi-Fi)]
Sets the camera to sleep 15 minutes after being disconnected from Wi-Fi.
[Auto LVF/
Monitor Off]
Sets the amount of time it takes for the viewfinder/monitor to turn off.
(The camera is not turned off.)
[Power Save LVF
Shooting]
Puts the camera into sleep when the recording screen is displayed using
automatic viewfinder/monitor switching.
• [Power Save LVF Shooting] does not operate when [Time] is set to [OFF].
[Time] Sets the amount of time until the camera is put into sleep.
[Display]
Sets the screen where the camera is put to sleep.
[Only Monitor Info.]:
Puts the camera into sleep only when the on-monitor recording
information screen is displayed. (P49)
[All Live View]:
Puts the camera into sleep from any screen during recording
standby.
• To recover from [Sleep Mode], [Sleep Mode(Wi-Fi)], or [Power Save LVF Shooting], perform
one of the following operations:
– Press the shutter button halfway.
– Set the camera on/off switch to [OFF] and then [ON] again.
• To recover from [Auto LVF/Monitor Off], press one of the buttons.
Not available in these cases:
• [Economy] does not work in the following cases.
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a slide show
– When recording with [4K Pre-Burst]
– When recording in [Multi Exp.]
– When using [Time Lapse Shot]
– When using [Stop Motion Animation] (when [Auto Shooting] is set)
– When recording with Live View Composite
– When using the HDMI output during recording
– When using the AC Adaptor (optional) and the DC Coupler (optional)