User's Manual

249
9. Menu Guide
• [Clear Retouch] is a setting to be used through
touch operations and automatically enables
touch operation.
1 Press 2/1 to select a picture, and
then press [MENU/SET].
2 Drag your finger over the part you want to delete.
• The parts to be erased are colored.
• To return the colored part back to its previous state, touch
[Undo].
3 Touch [Set].
4 Touch [Save] or press [MENU/SET].
[Clear Retouch]
>
[Playback] > [Clear Retouch]
Erasing details (enlarging the display)
1 Touch [SCALING].
• Pinching out/pinching in the screen allows you to
enlarge/reduce it.
• Dragging the screen allows you to move the
enlarged part.
2 Touch [REMOVE].
• This will bring you back to the operation of dragging
your finger over the part you want to delete. The part
you want to delete can be dragged even while the picture is enlarged.
• Pictures may appear unnatural because the background of deleted parts is artificially created.
• For group pictures, perform [Clear Retouch] on each picture.
(They cannot be edited at once.)
• When [Clear Retouch] is performed on group pictures, they are saved as new pictures
separate from the original ones.
Not available in these cases:
• [Clear Retouch] is not available in the following cases:
– When the viewfinder display is in use
– When an HDMI micro cable is connected
• This function is not available in the following types of images:
– Motion pictures
– 4K burst files
– Images recorded with the Post Focus function
– Panorama pictures
– Pictures taken with [ ]
MENU
6&$/,1*
5(029(
6HW8QGR
6&$/,1*
5(029(
6HW8QGR