User's Manual
Table Of Contents
- Contents
- 1. Before Use
- 2. Getting Started/Basic Operations
- Attaching the Shoulder Strap
- Charging the Battery
- Inserting the Card (Optional)
- Card Information
- Attaching a Lens
- Changing the Monitor Position
- Setting the Clock (When Turning On for the First Time)
- Basic Operations
- How to Hold the Camera
- Using the Viewfinder
- Shutter button (Taking pictures)
- Motion picture button (Recording motion pictures)
- Mode dial (Selecting a Recording Mode)
- Front Dial/Rear Dial
- Control Dial
- Cursor buttons/[MENU/SET] button
- [DISP.] button (switching the information display)
- Touch screen (Touch operations)
- Taking Pictures Using the Touch Function
- Setting menu items
- Quick Menu
- Fn Buttons
- Entering Text
- 3. Recording Modes
- 4. Focus, Brightness (Exposure) and Color tone Settings
- 5. 4K Photo and Drive Settings
- 6. Stabilizer, Zoom and Flash
- 7. Recording Motion Pictures
- 8. Playing Back and Editing Images
- 9. Menu Guide
- 10. Using the Wi-Fi/Bluetooth function
- What you can do with the Wi-Fi®/Bluetooth® function
- Wi-Fi function/Bluetooth function
- Connecting to a smartphone
- Operating the Camera with a Smartphone
- Displaying pictures on a TV
- Sending images from the camera
- Sending images to a smartphone
- Printing Wirelessly
- Sending images to AV device
- Sending images to PC
- Using Web services
- Wi-Fi connections
- [Wi-Fi Setup] Menu
- 11. Connecting to other devices
- 12. Others
10. Using the Wi-Fi/Bluetooth function
298
[Wi-Fi Setup] Menu
Configure the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
This sets the higher priority between the camera and smartphone to perform operations
during remote recording. (P267)
You can improve security by enabling password entry for a direct connection to a
smartphone.
• When [ON] is selected, you can also set up a connection by scanning a QR code.
Acquires or changes the “LUMIX CLUB” login ID. (P289)
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as the destination PC is
required.
(The default setting is “WORKGROUP”.)
1 Press [MENU/SET].
2 Enter the workgroup of the connecting PC.
• For information on how to enter characters, refer to P64.
• To reset to the default setting, press [DISP.].
You can change the name (SSID) of this unit.
1 Press [DISP.].
2 Enter the desired device name.
• For information on how to enter characters, refer to P64.
• A maximum of 32 characters can be entered.
> [Setup] > [Wi-Fi] > [Wi-Fi Setup]
[Priority of Remote Device]
[Wi-Fi Password]
[ON] Connects the camera and a smartphone using an SSID and password. (P263)
[OFF] Connects the camera and a smartphone using an SSID. (P262)
[LUMIX CLUB]
[PC Connection]
[Device Name]
MENU