User's Manual

11. Connecting to other devices
312
∫ Making print settings on the camera
Setting options include the number of printed pictures and their size. Make settings before
selecting [Print start].
• If the printer does not support date printing, the date cannot be printed on the picture.
• Depending on the printer, the date print settings of the printer may take precedence so check if
this is the case.
• Items not supported by the printer are not displayed.
• When you want to print pictures on a paper size or a layout which is not supported by the
camera, set [Paper Size] or [Page Layout] to [{] and then set the paper size or the layout on
the printer.
(For details, refer to the operating instructions of the printer.)
You can use [Text Stamp] in the [Playback] menu to stamp date and time on pictures.
∫ Printing date without using [Text Stamp]
In-store printing:
Only recording date can be printed. Order date printing at a store.
The characters entered using the following menus cannot be printed at a store.
• [Age] and [Name] in [Face Recog.] or [Profile Setup]
• [Location] in [Travel Date]
•[Title Edit]
Printing at home:
When using a printer that supports date printing, you can print recording date and time by
setting [Print with Date] (P312) to [ON].
You can use the software “PHOTOfunSTUDIO” to set the print settings for recording date
and text information.
[Print with Date] [ON]/[OFF]
[Num.of prints] Sets number of pictures (up to 999 pictures).
[Paper Size] Sets the paper size.
[Page Layout]
Sets whether or not to add borders and how many pictures to be
printed on each sheet of paper.
Adding date and text to pictures