Advanced User Guide

Firmware Ver. 1.1

F-6

The screen is displayed brighter than the image recorded.

This will make it easier to check the composition in low-light environment.

Settings: [ON]/[OFF]/[SET]

• You can change the Recording Mode in which [Live View Boost] works by using [SET].

• Noise may be more noticeable in the screen than in the recorded image.

• This function does not work in the following cases:

– When adjusting the exposure (when the shutter button is pressed halfway, for example)

– When recording a motion picture or 6K/4K photo

– When an image effect in [Filter Effect] of [Filter Settings] is set

– When using [Constant Preview]

• [Peaking] in the [Custom] ([Monitor / Display]) menu will not be available.

This disables the focus ring operation of the interchangeable lens during Manual Focus to

lock the focus.

Settings: [ON]/[OFF]

• [MFL] is displayed on the recording screen while the focus ring is locked.

This sets the operation to be performed when [ ] (White Balance), [ ] (ISO sensitivity)

or [ ] (Exposure Compensation) is pressed.

• Press the function button assigned with [Operation Lock] to disable the operations.

[Live View Boost] has been added to the [Custom] menu

> [Custom] > [Monitor / Display] > [Live View Boost]

[Focus Ring Lock] has been added to the [Custom] menu

> [Custom] > [Operation] > [Focus Ring Lock]

[WB/ISO/Expo. Button] has been added to the [Custom] menu

> [Custom] > [Operation] > [WB/ISO/Expo. Button]

[While Pressing] Allows you to change the setting while pressing and holding the button.

[After Pressing] Allows you to change the setting after pressing the button.

[Dial] has been added to [Operation Lock Setting] in the [Custom] menu

> [Custom] > [Operation] > [Operation Lock Setting]

[Dial] Disables the front, rear, and control dial operations.