Advanced User Guide

Firmware Ver. 2.0

F-26

∫ [V-Log L] has been added to [Photo Style]

Applicable modes:

You can perform Log recording by setting [Photo Style] to [V-Log L]. It allows you to create

images finished with rich gradation through post production editing.

• LUTs (Look-Up Tables) can be used for post-production editing. You can download LUT data

from the support site below.

https://panasonic.jp/support/global/cs/dsc/download/index3.html

(English only)

• The recording screen and images output via HDMI will appear darker overall.

• The ISO sensitivity lower limit is [ISO400].

• For the image quality of the [Photo Style], only [Sharpness] and [Noise Reduction] can be

adjusted.

• [Highlight Shadow] is fixed to [ ] (Standard).

• [i.Dynamic] is fixed to [OFF].

• [Luminance Level] is fixed to [0-255] ([0-1023]).

• When pictures taken with [V-Log L] are selected with [RAW Processing], the following occurs:

– [Photo Style] is fixed to [V-Log L].

– [Color Space] in [More settings] is fixed to [sRGB].

– [i.Dynamic], [Contrast], [Highlight], [Shadow], and [Saturation] cannot be adjusted.

∫ Menus have been added for display of and output via HDMI of images to which

LUT data is applied

Importing LUT files

• Supported LUT data format:

– The “.vlt” format, which meets the requirements specified in the “VARICAM 3DLUT

REFERENCE MANUAL Rev.1.0”

– File names consisting of up to 8 alphanumeric characters (excluding extension)

Preparations:

• Save the LUT data in the card. Save it to the root directory (the first folder that appears when

you access the card on your computer) with the extension “.vlt”.

1 Insert the card containing the LUT data into the card slot 1.

2 Select the menu.

> [Rec]/ [Motion Picture] > [Photo Style]

[V-Log L] A gamma curve effect designed for post production editing.

> [Custom] > [Monitor / Display] > [V-LogL View Assist] >

[Read LUT File]