Advanced User Guide

F-27
Firmware Ver. 2.0
3 Press 3/4 to select the LUT data you want to import and then press [MENU/
SET].
4 Press 3/4 to select the item to which you want to register the data and then
press [MENU/SET].
• Up to 4 pieces of LUT data can be registered.
• If you select an item containing registered data, it will be overwritten.
[V-LogL View Assist]
Display images to which LUT data is applied on the screen when [Photo Style] is set to
[V-Log L].
• [LUT Monitor Display] can also be set in the [Playback] menu.
> [Playback] > [LUT Monitor Display]
• This item is available only when [Photo Style] is set to [V-LogL].
• When the camera is in Playback Mode, this function is applied only to images recorded with
[V-Log L].
• The effects of LUT data are not applied to motion pictures saved to the card.
[LUT HDMI Display]
Apply LUT data to images that are output to an HDMI device when [Photo Style] is set to
[V-Log L].
Settings: [ON]/[OFF]
• This item is available only when [Photo Style] is set to [V-LogL].
• When the camera is in Playback Mode, this function is applied only to images recorded with
[V-Log L].
> [Custom] > [Monitor / Display] > [V-LogL View Assist]
[LUT Select]
Allows you to select the LUT data to be applied from among the preset
([Vlog_709]) and registered LUT data.
[LUT Monitor
Display]
Sets the monitor/viewfinder display setting of the camera to be applied when
[Photo Style] is set to [V-Log L].
• [ON]: Displays images using LUT data. [LUT] is displayed on the
recording screen.
• [OFF]: Displays [V-Log L] images. [V-Log L] is displayed on the recording
screen.
> [Motion Picture] > [HDMI Rec Output] > [LUT HDMI Display]
> [Setup] > [TV Connection] > [LUT HDMI Display]
MENU
MENU
MENU
MENU