Manualshelf

Advanced User Guide

ManualsBrandsPanasonic ManualsCamera & PhotoPANASONIC LUMIX G9 4K Digital Camera, 20.3 Megapixel Mirrorless Camera plus 80 Megapixel High-Resolution Mode, 5-Axis Dual I.S. 2.0, 3-Inch LCD, DC-G9 (Black)
361362363364365366367368369370
Firmware Ver. 2.0
F-28
∫ [Waveform Monitor] has been added to the [Creative Video] menu
Applicable modes:
Luminance can be checked using the waveform.
1 Set the mode dial to [ ].
2 Select the menu.
3 Press 3/4/2/1 to select the display position and then press [MENU/SET].
• Direct touch operation is also possible from the recording screen.
• Waveforms cannot be output over HDMI.
• [Histogram] does not work when [Waveform Monitor] is set.
> [Creative Video] > [Waveform Monitor] > [ON]
A The range between 0 and 100 shows dotted lines at intervals of 10.
B IRE (Institute of Radio Engineers)
C 109 (dotted line)
D 100
E 50
F 0
G s4 (dotted line)
H Display example
• The waveform displayed on the camera indicates the luminance as values based on the
conversions below.
– A black level of 0: A luminance value of 16
– A white level of 100: A luminance value of 235
MENU