User Manual

9. Using Menu Functions

196

Applicable modes:

The camera raises the resolution by correcting the blurriness caused by diffraction when

the aperture is closed.

Settings: [AUTO]/[OFF]

Applicable modes:

This function generates a picture with enhanced resolution from pre-recorded images. It is

effective for still subjects.

• Use a tripod to minimize camera shake.

• If you are using a Panasonic interchangeable lens, its image stabilizer function will be

automatically set to [OFF].

When using a non-Panasonic interchangeable lens provided with an image stabilizer function

that can be turned ON/OFF, set it to OFF.

1 Press 3/4 to select [Start], and press [MENU/SET].

• The High-Res Mode icon A will flash when shake is

detected.

It may not be possible to create pictures with the

impression of high resolution. To avoid this, hold the

camera firmly.

2 Decide on the composition, and perform recording.

• The screen will go dark during recording.

• The recording state indicator (red) B will flash.

Do not move the camera while the indicator is flashing.

• Recording will finish automatically.

When the recording has finished, the camera will combine

the pictures, so it will not be able to perform the next

recording for a while.

• You can proceed to the next recording.

3 Press [Fn2] to end High-Res Mode.

[Diffraction Compensation]

> [Rec] > [Diffraction Compensation]

• Compensation effect may not be achieved depending on the recording conditions.

• Noise may stand out with higher ISO sensitivity.

[High Resolution Mode]

> [Rec] > [High Resolution Mode]