Advanced Operating Instructions

119

5. 6K/4K Photo and Drive Settings

∫ Setting Pre-Burst Recording ([6K/4K Burst]/[6K/4K Burst(S/S)])

The camera starts recording approximately 1 second before the shutter button is pressed

fully, so you will not miss a photo opportunity.

Select the menu. (P55)

Settings: [ON]/[OFF]

∫ Setting Loop Recording ([6K/4K Burst(S/S)])

With [6K/4K Burst(S/S)], you can perform recording while deleting the oldest recorded

data, allowing you to keep on recording while waiting for a photo opportunity without

replacing the card.

• Once you start recording, the 6K/4K burst file will be recorded and divided approximately every

2minutes.

Approximately the last 10 minutes (up to approximately 12 minutes) will be saved. The

preceding part will be deleted.

Select the menu. (P55)

Settings: [ON]/[OFF]

> [Rec] > [6K/4K PHOTO] > [Pre-Burst Recording]

• When this function is enabled, [ ] is displayed on the recording screen.

• Auto Focus operation settings and menus that cannot be set while this function is in use are

the same as those during [6K/4K Pre-Burst] operation.

Battery drainage and camera temperature

• When [6K/4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains faster and

the camera temperature rises. Use these functions only when recording with them.

> [Rec] > [6K/4K PHOTO] > [Loop Recording(4K PHOTO)]

• We recommend that you use a sufficiently charged battery or an AC adaptor (optional).

• Up to 12 hours of continuous recording is possible.

• When this function is enabled, [ ] is displayed on the recording screen.

Not available in these cases:

• [Loop Recording(4K PHOTO)] is not possible when there is insufficient free space on the card.

• [Loop Recording(4K PHOTO)] is not available for [6K 18M].