User Guide

5. 4K Photo and Drive Settings

120

∫ Setting Pre-Burst Recording ([4K Burst]/[4K Burst(S/S)])

The camera starts recording approximately 1 second before the shutter button is pressed

fully, so you will not miss a photo opportunity.

Settings: [ON]/[OFF]

∫ Setting Loop Recording ([4K Burst(S/S)])

You can perform recording while deleting the oldest recorded data, allowing you to keep

on recording while waiting for a photo opportunity without replacing the card.

Settings: [ON]/[OFF]

> [Rec] > [4K PHOTO] > [Pre-Burst Recording]

• When this function is enabled, [ ] is displayed on the recording screen.

• Auto Focus operation settings and menus that cannot be set while this function is in use are

the same as those during [4K Pre-Burst] operation.

Battery drainage and camera temperature

• When [4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains faster and the

camera temperature rises. Use these functions only when recording with them.

> [Rec] > [4K PHOTO] > [Loop Recording(4K PHOTO)]

• Once you start recording, the 4K burst file will be recorded and divided approximately every

2 minutes.

Approximately the last 10 minutes (up to approximately 12 minutes) will be saved. The

preceding part will be deleted.

• We recommend that you use a sufficiently charged battery or an AC adaptor (optional).

• Up to 12 hours of continuous recording is possible.

• When this function is enabled, [ ] is displayed on the recording screen.

Not available in these cases:

• [Loop Recording(4K PHOTO)] is not possible when there is insufficient free space on the card.