User Guide

301
10. Using the Wi-Fi/Bluetooth function
∫ Registering a wireless access point to the camera (Setup 1)
• If you have connected the camera to the wireless access point you want to use before, the
procedure below is not required.
1 Select the camera’s menu.
2 Select [New connection].
3 Connect to the wireless access point.
• Refer to the connection methods described on P321 to connect the camera to the wireless
access point.
∫ Setting up “LUMIX CLUB” (Setup 2)
Preparations:
• Create an account for the Cloud Storage you want to use, and have the login information
available.
• Register to “LUMIX CLUB”. (P317)
1 Connect to the “LUMIX CLUB” site using a smartphone or computer.
https://lumixclub.panasonic.net/eng/c/
2 Enter your “LUMIX CLUB” login ID and password and log in to the service.
• If you are required to register an email address, operate following the on-screen
instructions.
3 Select and register the cloud storage service you want to use in Cloud Storage
Link Settings in Web service link settings.
• Operate following the on-screen instructions.
Setting up Auto Cloud Backup
> [Setup] > [Bluetooth] > [Wi-Fi network settings]
• A wireless access point will be registered automatically after the camera connects to it via
Wi-Fi.
• You can register up to 17 wireless access points. If you try to register more than 17 devices,
the wireless access point with the oldest registration history will be replaced.
• Performing [Reset Network Settings] will delete registered wireless access points.
MENU