User Manual

154
Stabilizer, Zoom and Flash
Correcting jitter
●
The Image Stabilizer may produce operational sound or cause vibration during its
operation, but these are not malfunctions.
●
When you use a tripod, we recommend setting [Operation Mode] to [OFF].
●
[Stabilizer] cannot be used by selecting [ ] (Normal) in Panorama Shot Mode.
●
In the following cases, the [Stabilizer] will switch to [ ] (Normal), even if it is set to [ ]
(Panning):
• During motion picture recording
• When recording 4K photos
• When recording using [Post Focus]
●
Cases where the stabilizer function may be ineffective:
• When there is a lot of jitter
• When the zoom magnification is high (also in the Digital Zoom range)
• When taking pictures while following a moving subject
• When the shutter speed becomes slower to take pictures indoors or in dark places
●
The panning effect by selecting [ ] is not fully achieved in the following cases:
• Bright summer days or other bright locations
• When the shutter speed is higher than 1/100 seconds
• When the motion of a subject is slow and the speed with which the camera is moved is too slow
(a nice background blur is not achieved)
• When the camera is not adequately tracking the motion of a subject
●
[E-Stabilization (Video)] is not available in the following cases.
• When using the Digital Zoom
• When [4K Live Cropping] is set