Operating Instructions Digital Camera DC-S1H DVQP2024ZA F0919AJ0 until 2019/10/01
Please read these instructions carefully before using this product, and save this manual for future use. Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read this document carefully and keep it handy for future reference. Please note that the actual controls and components, menu items, etc. of your Digital Camera may look somewhat different from those shown in the illustrations in this document. Carefully observe copyright laws.
About Operating Instructions Symbols Used in This Document Symbols for recording modes, pictures, and videos that can be used In this document, symbols are placed at the start of functional explanations (recording modes, pictures, and videos) showing conditions in which these functions can be used. Black icons show conditions in which these can be used, and grey icons show conditions in which these cannot be used.
About Operating Instructions Notification classification symbols In this document, notifications are classified and described using the following symbols: To confirm prior to using the function Hints for better use of the camera and tips for recording Notifications and supplementary items regarding specifications Related information and page number 0 This document provides an explanation with the assumption that menu settings are in the default settings.
Chapters 1. Introduction 19 2. Getting Started 34 3. Basic Operations 59 4. Image Recording 87 5. Focus/Zoom 96 6. Drive/Shutter/Image Stabiliser 131 7. Metering/Exposure/ISO Sensitivity 185 8. White Balance/Image Quality 204 9. Flash 228 10. Recording Videos 242 11. Special Video Recording 297 12. Connections with External Devices (Video) 329 13. Playing Back and Editing of Images 347 14. Camera Customisation 366 15. Menu Guide 390 16. Wi-Fi/Bluetooth 465 17.
Contents About Operating Instructions .......................................................3 Chapters ......................................................................................5 Contents by Function.................................................................15 1. Introduction 19 Before Use.................................................................................19 Standard Accessories................................................................22 Lenses That Can Be Used......
Contents 3. Basic Operations 59 Basic Recording Operations...................................................... 59 How to Hold the Camera....................................................................59 Taking Pictures ..................................................................................61 Recording Videos...............................................................................62 Selecting the Recording Mode ...........................................................
Contents 5. Focus/Zoom 96 Selecting the Focus Mode .........................................................96 Using AF ....................................................................................97 [AF Custom Setting(Photo)] ............................................................ 101 Selecting the AF Mode ............................................................103 [Face/Eye/Body/Animal Detect.]..................................................... 105 [Tracking].........................
Contents Selecting the Focus Point for the Picture to Save............................169 Focus Stacking ................................................................................171 [Silent Mode]............................................................................ 174 [Shutter Type] .......................................................................... 175 Image Stabiliser....................................................................... 177 Image Stabiliser Settings ...............
Contents 9. Flash 228 Using an External Flash (Optional)..........................................228 Removing the Hot Shoe Cover........................................................ 228 Setting Flash............................................................................231 [Flash Mode].................................................................................... 231 [Red-Eye Removal] .........................................................................
Contents [Master Pedestal Level] ...................................................................279 Recording While Controlling Overexposure (Knee) .........................280 [ISO Sensitivity (video)]....................................................................282 Audio Settings ......................................................................... 283 [Sound Rec Level Disp.] ..................................................................283 [Mute Sound Input]...........................
Contents 12. Connections with External Devices (Video) 329 HDMI Devices (HDMI Output) .................................................329 Attaching the Cable Holder ............................................................. 330 Images Output via HDMI ................................................................. 333 HDMI Output Image Quality (Resolution/Frame Rate) ............335 Settings for Down-Converting.......................................................... 335 HDMI Output Settings.....
Contents 14. Camera Customisation 366 Fn Buttons ............................................................................... 367 [Dial Operation Switch] ............................................................ 376 Quick Menu Customisation...................................................... 378 Custom Mode .......................................................................... 383 My Menu..................................................................................
Contents 17. Connecting to Other Devices 522 Viewing on a TV.......................................................................524 Importing Images to a PC ........................................................527 Copying Images to a PC ................................................................. 527 Installing Software ........................................................................... 529 Storing on a Recorder..............................................................
Contents by Function Power Source Viewfinder Charging Charging error l 36 l 38 l 42 Battery indication l 44 Power supply l 43 [Battery Information] l 450 Power save function l 46 Number of pictures that can l 579 be taken, available recording time Card Cards that can be used [Card Format] [Double Card Slot Function] [Destination Card Slot] Switching the playback card l 25 l 50 l 92 l 92 l 348 l 354 Folder structure l 528 [Folder / File Settings] l 93 [File Number Reset] l 95 Entering characters l 464 N
Contents by Function AF/AE Lock Touch AF [Touch Pad AF] [AF Assist Light] MF [MF Guide] [MF Assist] [Focus Peaking] l 199 l 84 l 120 l 121 l 401 l 123 l 422 l 422 l 402 Image Stabiliser [Image Stabilizer] [E-Stabilization (Video)] [Boost I.S.
Contents by Function Video Recording Video recording [System Frequency] [Image Area of Video] Creative Video mode [Variable Frame Rate] High frame rate video [Focus Transition] [Live Cropping] Log recording (V-Log) HLG video Anamorphic Recording [Loop Recording (video)] [Segmented File Recording] [Tally Lamp] [Down Convert] [Time Code] Remote control recording Exposure (Video) l 242 l 253 l 266 l 247 l 297 l 300 l 301 l 304 l 308 l 312 l 315 l 320 l 322 l 242 l 335 l 268 l 540 Display (Video) SS/Gain Ope
Contents by Function Editing of Images [RAW Processing] [Protect] [Rating] [Resize] [Rotate] [Video Divide] [Copy] Wi-Fi/Bluetooth l 359 l 460 l 460 l 461 l 461 l 364 l 462 Customisation [Custom] menu Function button Custom recording mode My Menu Quick menu Dial operation Saving camera settings Connecting with Other Devices Sending images (PC) Printing Viewing on a TV HDMI output Tethered recording Cable holder 18 l 418 l 367 l 383 l 387 l 378 l 376 l 389 l 527 l 535 l 524 l 329 l 525 l 533 l 330 Blu
1. Introduction Before Use Firmware of Your Camera/Lens Firmware updates may be provided in order to improve camera capabilities or to add functionality. For smoother recording, we recommend updating the firmware of the camera/lens to the latest version. 0 For the latest information on the firmware or to download/update the firmware, visit the following support site: https://panasonic.
1. Introduction Do not place a hand inside the camera mount. This may cause a failure or damage because the sensor is a precision device. If you shake the camera while turning the camera off, a sensor may operate or a rattling sound may be heard. This is caused by the image stabiliser mechanism in the body. It is not a malfunction.
1. Introduction Be Sure to Perform Trial Recording in Advance Perform trial recording in advance of an important event (wedding, etc.) to check that recording can be performed normally. No Compensation Regarding Recording Please note that compensation cannot be provided in the event that recording could not be performed due to a problem with the camera or a card.
1. Introduction Standard Accessories Check that all the accessories are supplied before using the camera. 0 The accessories and their shape will differ depending on the country or area where the camera was purchased. For details on the accessories, refer to “Operating Instructions ” (supplied). 0 Digital camera body is referred to as camera in this document. 0 Battery pack is referred to as battery pack or battery in this document.
1. Introduction Lenses That Can Be Used The lens mount of this camera is compliant with the L-Mount standard of Leica Camera AG. It can be used with 35 mm full-frame compatible interchangeable lenses and APS-C size interchangeable lenses of this standard. This camera is capable of sensor read out suited to the image circles of 35 mm full-frame interchangeable lenses and Super 35 mm interchangeable lenses.
1. Introduction Notes on the Use of Super 35 mm/APS-C Lenses As the image area is narrowed when using Super 35 mm/APS-C lenses, the following functions may not be available or their behaviour may be different. [Aspect Ratio] [Picture Size] [Ex. Tele Conv.
1. Introduction Memory Cards That Can Be Used You can use the following memory cards with this camera. 0 SD memory card, SDHC memory card, and SDXC memory card are referred to by the generic name of card in this document. SD memory card (512 MB to 2 GB) SDHC memory card (4 GB to 32 GB) SDXC memory card (48 GB to 128 GB) 0 The camera supports SDHC/SDXC memory cards compliant with UHS Speed Class 3 of the UHS-I/ UHS-II standard.
1. Introduction Cards That Can Be Used Stably with This Camera When using the following functions, use cards that have the correct SD Speed Class, UHS Speed Class, and Video Speed Class. 0 Speed classes are standards to guarantee the minimum speed necessary for continuous writing.
1. Introduction 0 You can prevent the writing and deleting of data by setting the write-protect switch A on the card to “LOCK”. 0 The data stored on a card may be damaged due to electromagnetic waves, static electricity or a failure of the camera or card. We recommend backing up important data. 0 Keep the memory card out of reach of children to prevent swallowing.
1. Introduction Names of Parts Camera 9 10 11 12 13 14 1 2 15 3 2 4 16 5 17 6 7 18 8 1 Stereo microphone (l 284) 0 Do not block the microphone with a finger. Audio will be difficult to record. 2 [ ] (Recording distance reference mark) (l 126) 3 Mode dial (l 63) 4 Mode dial lock button (l 63) 5 Drive mode dial (l 131) 6 Hot shoe (hot shoe cover) (l 228) • Keep the hot shoe cover out of reach of children to prevent swallowing.
1.
1. Introduction 1 2 3 4 9 11 5 12 13 14 15 6 7 8 10 16 1 Eye sensor (l 69) 2 Viewfinder (l 32, 69, 542) 3 Eye cup (l 572) 4 Eye cup lock lever (l 572) 5 Fan inlet 0 The fan inlet for the cooling fan. 0 Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. 10 Card slot 2 (l 48) 6 Monitor lock lever (l 55) 13 Card access light (l 49) 7 Tripod mount (l 576) 0 If you attempt to attach a tripod with a screw length of 5.5 mm (0.
1. Introduction 7 8 1 2 9 3 4 5 10 11 12 6 13 14 15 16 17 18 19 20 1 21 1 2 3 4 5 6 7 8 9 Shoulder strap eyelet (l 34) Self-timer light (l 158)/ AF assist light (l 401) Fn button (Fn1) (l 367) Grip Preview button (l 196)/ Fn button (Fn2) (l 367) Lens release button (l 53) Front tally lamp (l 242) Flash synchro socket (flash synchro socket cap) (l 229) 0 Use the flash with a synchronisation voltage of 250 V or less.
1. Introduction Viewfinder/Monitor Displays At the time of purchase, the viewfinder/monitor displays the following icons. 0 For information about the icons other than those described here, refer to page 542. Viewfinder 1 Monitor 2 3 4 5 FINE L 6 7 AFS FINE L 60 60 F4.0 ISO100 8 9 1011 12 1 2 Photo Style (l 210) 3 4 5 6 7 13 F4.
1. Introduction Status LCD Display The following recording settings are displayed when recording pictures. 0 Refer to page 248 for information on the [ ] mode (Creative Video mode) display. 1 2 3 WB BKT 5 AWB 7 BKT 5 4 8 11 3 9 4 1/60 BKT F 4.
2. Getting Started Attaching a Shoulder Strap Attach a shoulder strap to the camera with the following procedure to prevent it from dropping. 1 Pass the shoulder strap through the shoulder strap eyelet A. 2 Pass the end of the shoulder strap through the ring and then pass it through the fastener. 3 Pass the end of the shoulder strap through the other hole of the fastener. 4 Pull the shoulder strap and check that it will not come out.
2. Getting Started 0 Use the shoulder strap around your shoulder. – Do not wrap the strap around your neck. It may result in injury or accident. 0 Do not leave the shoulder strap where an infant can reach it. – It may result in an accident by mistakenly wrapping around the neck.
2. Getting Started Charging the Battery You can charge the battery either using the supplied charger, or in the camera body. You can also charge by connecting to a USB PD (USB Power Delivery) compatible device using the supplied USB connection cable (C–C). Furthermore, you can turn the camera on while it is charging and record. 0 The battery that can be used with the camera is DMW-BLJ31. (As of August 2019) 0 The battery is not charged at the time of purchase. Charge the battery before use.
2. Getting Started 1 Connect the charger and the AC adaptor with the USB connection cable (C–C). 0 Hold the plugs and insert them straight in or pull them straight out. (Inserting these at an angle may cause deformation or malfunction) 2 3 Connect the AC mains lead to the AC adaptor and then insert into the electrical outlet. Insert the battery. ≥Insert the terminal end of the battery and push. ≥The [CHARGE] light A blinks and charging begins.
2. Getting Started [CHARGE] Light Indications Charging status 0% to 49% 50% to 79% 80% to 99% 100% [CHARGE] light A Blinking B On C Off 0 After charging, disconnect the power source connection and remove the battery. 0 If the [50%] light is blinking quickly, then charging is not occurring. – The temperature of the battery or surroundings is either too high or too low. Try charging at an ambient temperature between 10 °C and 30 °C (50 oF and 86 oF).
2. Getting Started Battery Insertion 0 Always use genuine Panasonic batteries (DMW-BLJ31). 0 If you use other batteries, we cannot guarantee the quality of this product. 1 Set the camera on/off switch to [OFF]. 2 Open the battery door. 3 Insert the battery. ≥Move the battery door release lever to the [OPEN] position. ≥Insert the terminal end of the battery and push until a locking sound is heard. 0 Check that the lever A is holding the battery in place. 4 Close the battery door.
2. Getting Started Removing the Battery 1 Set the camera on/off switch to [OFF]. 2 Open the battery door. 0 Check that the card access light A is turned off and then open the battery door. 3 Push the lever B in the direction of the arrow and then remove the battery. 0 Ensure that no foreign objects are adhering to the inner side (rubber seal) of the battery door. 0 Remove the battery after use. (The battery will drain if left inserted in the camera for a long period of time.
2. Getting Started Inserting a Battery into the Camera for Charging Charging time Approx. 140 min 0 Using the camera body and the supplied AC adaptor. The camera is turned off. 0 The indicated charging time is for when the battery has been discharged completely. The charging time may vary depending on how the battery has been used. The charging time for the battery in hot/cold environments or a battery that has not been used for a long time may be longer than normal.
2. Getting Started 4 Connect the AC mains lead to the AC adaptor and then insert into the electrical outlet. ≥[CHARGE] is displayed on the status LCD and charging starts. [FULL] is displayed when charging is complete. 0 You can also charge the battery by connecting a USB device (PC, etc.) and the camera with the USB connection cable (C–C or A–C). In that case, charging may take a while. 0 When using the Battery Grip (DMW-BGS1: optional), the battery within the Battery Grip will also be charged.
2. Getting Started Using the Camera While Supplying It with Power (Supplying Power/Charging) When charging with both the camera body and the supplied AC adaptor (l 41), you can charge while the camera is being supplied with power by turning the camera on. You can record while charging. This is also possible by connecting devices that support USB PD (USB Power Delivery) to the camera. A AC adaptor B Devices that support USB PD (mobile battery, etc.) 0 Insert the battery into the camera.
2. Getting Started Notifications Regarding Charging/Power Supply Power Indications Indication on status LCD Indication on monitor A USB connection cable supplying power B Power source C The battery level of the battery in the camera D The battery level of the battery in the Battery Grip E Battery indication F Using the battery in the Battery Grip 80% or higher 60% to 79% 40% to 59% 20% to 39% 19% or below Low battery Blinking 0 Charge or replace the battery.
2. Getting Started 0 It has been found that counterfeit battery packs which look very similar to the genuine product are made available for purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion.
2. Getting Started [Power Save Mode] This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time. Reduces battery consumption. ¨[ ]¨[ [Sleep Mode] ] ¨ Select [Power Save Mode] Sets the amount of time until the camera is put to sleep. [Sleep Mode(Wi- Sets the camera to sleep 15 minutes after being disconnected Fi)] from Wi-Fi.
2.
2. Getting Started Inserting Cards (Optional) This camera supports the double card slot function. When two cards are used, relay recording, backup recording, and allocation recording are available. For information about the cards that can be used, refer to page 25. 1 Open the card door. ≥Slide the card door in the direction of the arrow while pushing down the card door lock lever. 2 Insert the cards.
2. Getting Started 0 You can set the way to record to card slots 1 and 2: [ ]¨[ ] ¨ [Double Card Slot Function] (l 92) Card Access Indications The card access light turns on while the card is being accessed. Removing a Card 1 Open the card door. 0 Check that the card access light A is turned off and then open the card door. 2 Push the card until it clicks and then pull the card out straight. 0 The card may be warm just after the camera has been used. Be careful when removing.
2. Getting Started Formatting Cards (Initialisation) Format the cards with the camera before use in order to ensure optimal card performance. 0 When a card is formatted, all of the data stored in the card is erased and cannot be restored. Save a backup of necessary data before formatting the card. ¨[ ]¨[ ] ¨ Select [Card Format] Settings: [Card Slot 1]/[Card Slot 2] 0 Do not turn off the camera or perform another operation during formatting.
2. Getting Started Attaching a Lens You can attach the Leica Camera AG L-Mount standard lens to this camera. For information about the lens that can be used, refer to page 24. 0 Change the lens in a location where there is not a lot of dirt and dust. If dirt or dust gets on the lens, refer to page 571. 0 Change the lens while the lens cap is attached. 1 2 Set the camera on/off switch to [OFF]. Turn the lens rear cap and the body cap in the direction of the arrow to remove them.
2. Getting Started 3 Align the lens fitting marks B on the lens and camera and then rotate the lens in the direction of the arrow. ≥Attach the lens by rotating it until it clicks. 0 When you have attached a lens that does not have a communication function with this camera, after turning on the camera, a message asking for confirmation of the lens information is displayed. You can register items such as the image circle and focal length for the lens when you select [Yes].
2. Getting Started Removing a Lens 1 Set the camera on/off switch to [OFF]. 2 While pressing the lens release button A, rotate the lens in the direction of the arrow until it stops and then remove it. 0 After removing the lens, be sure to attach the body cap and the lens rear cap.
2. Getting Started Adjusting the Monitor Direction and Angle The monitor on this camera has angling and tilting that you can adjust in combinations to freely change the orientation and angle. At the time of purchase, the monitor is stowed in the camera body. Turn the monitor surface out before use. 1 Open the monitor. 180° 2 Rotate the monitor. 0 You can rotate 180° towards the lens and 90° down. 3 54 Return the monitor to the original position.
2. Getting Started Tilt While sliding the monitor lock lever in the direction of the arrow, push the monitor up. 0 The monitor of this camera can be tilted in two stages. 0 The monitor can still be opened when tilted to 30°. 30° 60° 0 The angles of adjustment are guides only. 0 Take care not to trap a finger in the monitor. 0 Do not apply an excessive force to the monitor. This may cause damage or malfunction. 0 When not using the camera, close the monitor with the monitor surface facing in.
2. Getting Started Setting the Clock (When Turning On for the First Time) When you turn the camera on for the first time, a screen to set the time zone and clock appears. Be sure to set these settings before use to ensure images are recorded with the correct date and time information. 1 Set the camera on/off switch to [ON]. ≥If the language select screen is not displayed, proceed to Step . 4 2 3 4 5 When [Please set the language] appears, press . Set the language.
2. Getting Started 6 7 When [Please set the clock] appears, press or . Set the clock. 21: Select an item (year, month, day, hour, minute, or second). 34: Select a value. To set the display order B and time display format C ≥Press 21 to select the time zone [Style] and then press or , the screen for setting the display order and time display format appears. 8 9 Confirm your selection. ≥Press or . When [The clock setting has been completed.] appears, press or .
2. Getting Started 0 If the camera is used without setting the clock, it will be set to 0:00:00, 1st January 2019. 0 Clock settings are maintained for approx. 3 months using the built-in clock battery even without the battery. (Leave the fully-charged battery in the camera for approx. 24 hours to charge the built-in battery.
3. Basic Operations Basic Recording Operations How to Hold the Camera To minimise camera shake, hold the camera so that it will not move during recording. Hold the camera with both hands, keep your arms still at your side, and stand with your feet shoulder width apart. ≥ Hold the camera firmly by wrapping your right hand around the camera grip. ≥ Support the lens from below with your left hand. 0 Do not cover the AF assist light A or microphone B with your fingers or other objects.
3. Basic Operations Vertical Orientation Detection Function This function detects when pictures were recorded with the camera held vertically orientated. With the default settings, pictures are automatically played back vertically oriented. 0 If you set [Rotate Disp.] to [OFF], pictures will be played back without being rotated. (l 457) 0 When the camera is tilted significantly up or down, the vertical orientation detection function may not work correctly.
3. Basic Operations Taking Pictures 1 Adjust the focus. ≥Press the shutter button halfway (press it gently). ≥The aperture value A and shutter speed B are displayed. (When the correct exposure cannot be obtained, the indications blink in red.) ≥Once the subject is in focus, the focus indication C lights. (When the subject is not in focus, the indication blinks.) 60 F4.0 0 You can also perform the same operation by pressing [AF ON]. 2 Start recording.
3. Basic Operations 0 Recorded pictures can be displayed automatically by setting [Auto Review] of the [Custom] ([Monitor / Display (Photo)]) menu. You can also change the picture display duration to your preferred setting. (l 430) 0 With the default settings, you cannot take a picture until the subject is brought into focus. If you set [Focus/Shutter Priority] in the [Custom] ([Focus/Shutter]) menu to [BALANCE] or [RELEASE], you will be able to take a picture even when the subject is not in focus.
3. Basic Operations Selecting the Recording Mode While pressing the mode dial lock button 1, rotate the mode dial 2.
3. Basic Operations Camera Setting Operations When changing the camera settings, operate the camera using the following operation parts. To prevent accidental operation, you can disable operation with the operation lock lever.
3. Basic Operations Front Dial ( )/Rear Dial ( ) Rotate: Selects an item or numeric value. 0 Sets the aperture, shutter speed, and other settings when you are recording in the [P]/[A]/ [S]/[M] modes. The operation method can be changed in [Dial Set.]. (l 428) Control Dial ( ) Rotate: Selects an item or numeric value. 0 Adjusts the headphone volume during recording. The function can be changed in [Control Dial Assignment] of [Dial Set.].
3. Basic Operations Joystick (3421/ ) The joystick can be operated in 8 directions by tilting it up, down, left, right and diagonally and by pressing the centre part. A Tilt: Selects an item or numeric value, or moves a position. 0 Place your finger on the centre of the joystick before tilting. The joystick may not work as expected when the sides are pressed. B Press: Confirms a setting. 0 When recording, this moves the AF area and MF Assist.
3. Basic Operations 0 Touch the screen with clean and dry fingers. 0 If you will use a commercially available monitor protection sheet, observe the precautions for the sheet. (Visibility and operability may be impaired depending on the type of monitor protection sheet.
3. Basic Operations Display Settings Setting the Viewfinder Adjusting the Viewfinder Dioptre Rotate the dioptre adjustment dial while looking through the viewfinder. 0 Adjust until you can clearly see the text on the viewfinder. Switching the Viewfinder Display Magnification Press [V.MODE]. ≥The display magnification of the viewfinder can be switched between 3 levels.
3. Basic Operations Switching Between the Monitor and Viewfinder With the default settings, automatic viewfinder/monitor switching is set. When you look through the viewfinder, the eye sensor A works and the camera switches from monitor display to viewfinder display. You can switch to viewfinder display or monitor display with [LVF] button B. Press [LVF]. Automatic viewfinder/ monitor switching Viewfinder display Monitor display 0 The eye sensor does not work while the monitor is tilted.
3. Basic Operations Switching the Display Information The recording information (icons) on the recording screen and playback screen can be hidden. The monitor on the back can display the control panel, be turned off, etc. Press [DISP.]. ≥The display information is switched.
3. Basic Operations 0 Press [ ] to switch between display/hide of the level gauge. This can also be set by using [Level Gauge]. (l 438) 0 Control panel operation (l 75) 0 You can hide the control panel and black screen: [ ]¨[ ] ¨ [Show/Hide Monitor Layout] (l 439) 0 The display can be changed so that live view and display information do not overlap: [ ]¨[ ] ¨ [LVF/Monitor Disp. Set] (l 435) Playback Screen Detailed information display¢1 With information 2019.12.
3. Basic Operations Turning On the Status LCD Backlight Set the camera on/off switch to [ ]. ≥The backlight will turn on. ≥When you release the camera on/off switch, it returns to the [ON] position. ≥If the camera is left without any operations for a certain period of time, the backlight turns off. 0 With the default settings, the illuminated buttons turn on. 0 Set the camera on/off switch to [ ] again or press the shutter button fully to turn off the backlight.
3. Basic Operations Quick Menu This menu enables you to quickly set functions that are frequently used during recording without calling up the menu screen. You can also change the Quick menu display method and the items to display. 1 Display the Quick menu. 2 Select a menu item. 3 4 ≥Press [Q]. ≥Press 3421. ≥Directions on the diagonal can also be selected using the joystick. ≥Selection is also possible by rotating . ≥Selection is also possible by touching a menu item.
3. Basic Operations 0 Some items cannot be set depending on the recording mode or camera settings. 0 The Quick menu can be customised: [ 74 ]¨[ ] ¨ [Q.
3. Basic Operations Control Panel This screen allows you to view the current recording settings on the monitor. You can also touch the screen to change the settings. In the [ ] mode (Creative Video mode), the display changes to one especially for video. (l 548) 1 Display the control panel. ≥Press [DISP.] several times. AUTO 0 ISO AFS AWB 2 Touch the items. 3 Change the setting. 0 0 FINE 3:2 Fn 999 999 ≥The setting screens for each of the items are displayed.
3. Basic Operations Changing Directly Using the Dial 2 4 Steps to can also be changed using the following operations. AUTO 0 AFS 1 Press one of 3421 to enable selection of items. 0 Selected items are displayed in yellow. 0 ISO 3 Rotate values. to change the settings AUTO 0 ISO 0 AFS FINE AWB 0 Some items cannot be set depending on the recording mode or camera settings. 76 3:2 AWB 2 Press 3421 to select an item. 0 Selection is also possible by rotating or .
3. Basic Operations Menu Operation Methods In this camera, the menu is used for setting a wide variety of functions and performing camera customisations. Menu operations can be performed using the cursors, joystick, dial, or by touch. Configuration and operation parts of the menu The menu can be operated by pressing 21 to move between menu screens. Use the operation parts indicated below to operate the main tab, the sub tab, the page tab, and menu items without moving to the corresponding menu levels.
3. Basic Operations 2 Select a main tab. 3 Select a sub tab. ≥Press 34 to select a main tab and then press 1. ≥You can also perform the same operation by rotating to select the main tab and then pressing or . ≥Press 34 to select a sub tab and then press 1. ≥You can also perform the same operation by rotating to select the sub tab and then pressing or . 0 If there are page tabs A, then after the page tabs have finished switching, the next sub tab is switched to. 4 78 Select a menu item.
3. Basic Operations 5 Select a setting item and then confirm your selection. ≥Press 34 to select a setting item and then press or . ≥You can also perform the same operation by rotating to select the setting item and then pressing or . 0 The display and selection methods of setting items differ depending on the menu item. 6 Close the menu. ≥Press the shutter button halfway. ≥You can also close the menu by pressing [ ] several times. 0 For details about menu items, refer to Menu Guide.
3. Basic Operations Greyed Out Menu Items Menu items that cannot be set are displayed greyed out. If you press or while a greyed out menu item is selected, the reason why it cannot be set is displayed. 0 The reason why a menu item cannot be set may not be displayed depending on the menu item.
3. Basic Operations Intelligent Auto Mode The [iA] mode (Intelligent Auto mode) can record images using settings automatically selected by the camera. The camera detects the scene to set the optimal recording settings automatically to match the subject and recording conditions. 1 Set the mode dial to [iA]. 2 Aim the camera at the subject. 3 Adjust the focus. ≥When the camera detects the scene, the recording mode icon changes. (Automatic Scene Detection) ≥Press the shutter button halfway.
3. Basic Operations 4 Start recording. ≥Press the shutter button fully. 0 Backlight compensation operates automatically to prevent subjects from appearing dark when there is a backlight. Types of Automatic Scene Detection : Scenes detected during picture taking : Scenes detected during video recording : i-Portrait & Animal : i-Portrait¢1 : i-Scenery : i-Macro : i-Night Portrait¢2 : i-Night Scenery : i-Food : i-Sunset : i-Low Light : ¢1 Detected when animal detection is disabled.
3. Basic Operations 0 If none of the scenes are applicable, recording is with [ ] (standard setting). 0 Different scene types may be selected for the same subject depending on the recording conditions. AF Mode Changing the AF mode. 0 Each press of [ ] changes the AF mode. [ ] ([Face/Eye/ Body/Animal Detect.]) [ ] ([Tracking]) The camera detects a person’s face, eyes, and body (entire body or upper half of the body) and the body of animals, and adjusts the focus.
3. Basic Operations Recording Using Touch Functions Touch AF/Touch Shutter Touch functions allow you to focus on the point that you touch, release the shutter, etc. 0 With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu. (l 425) 1 2 Touch [ ]. Touch the icon. ≥The icon switches each time you touch it. (Touch AF) (Touch Shutter) Focus on the Touched Position. Record with focus on the point touched.
3. Basic Operations 0 When the Touch Shutter fails, the AF area first turns red and then disappears. 0 Refer to “Operations on the AF area movement screen” on page 107 for information about operations to move the AF area. 0 It is also possible to optimise the focus and brightness on the touched position: [ ]¨[ ] ¨ [Touch Settings] ¨ [Touch AF] ¨ [AF+AE] (l 119) Touch AE This function adjusts the brightness according to a touched position.
3. Basic Operations 3 Touch the subject to which you wish to adjust the brightness. 0 To return the position to which to adjust 4 the brightness to the centre, touch [Reset]. ュリヴヱハ 5HVHW 6HW Touch [Set]. How to Disable Touch AE Touch [ ]. 0 When the following function is being used, Touch AE is not available: – [Live Cropping] 0 You can also adjust both the focus and brightness to those of the position you touch.
4. Image Recording [Aspect Ratio] You can select the image aspect ratio.
4. Image Recording [Picture Size] Sets the picture’s image size. The image size varies depending on the [Aspect Ratio] or the lens used. When a Super 35 mm/APS-C lens is used, the image area switches to the one for Super 35 mm/APS-C, thereby narrowing the angle of view. ¨[ [Aspect Ratio] [4:3] [3:2] [16:9] ]¨[ ] ¨ Select [Picture Size] Picture size When using full-frame lenses When using Super 35 mm/ APS-C lenses [L] (21.5M) 5328k4000 [L] (9.5M) 3536k2656 [M] (10.
4.
4. Image Recording [Picture Quality] Set the compression rate used for storing pictures. ¨[ ]¨[ Setting ] ¨ Select [Picture Quality] File format [FINE] [STD.] [RAWiFINE] [RAWiSTD.] [RAW] 90 Settings details JPEG images that give priority to image quality. JPEG RAWiJPEG RAW JPEG images of standard image quality. This is useful for increasing the number of recordable pictures without changing the picture size. This records RAW and JPEG images ([FINE] or [STD.]) simultaneously.
4. Image Recording Note on RAW RAW format refers to a data format of images that have not been processed on the camera. Playback and editing of RAW images require the camera or the dedicated software. 0 You can process RAW images on the camera. (l 359) 0 Use software (“SILKYPIX Developer Studio” by Ichikawa Soft Laboratory) to process and edit RAW files on a PC. (l 531) 0 Pictures taken with [RAW] cannot be displayed enlarged to the maximum magnification during playback.
4. Image Recording [Double Card Slot Function] This sets the way recording to the card slots 1 and 2 is performed. ¨[ [Recording Method] ]¨[ ] ¨ Select [Double Card Slot Function] [Relay Rec] Selects the priority of card slots for recording. [Destination Card Slot]: [ ]/[ ] Relays recording to the card in the other card slot after the first card runs out of free space. [Backup Rec] Records the same images to both cards simultaneously.
4. Image Recording [Folder / File Settings] Set the folder and file name where to save the images. Folder name File name 100ABCDE PABC0001.JPG 1 Folder number (3 digits, 100 to 999) Colour space 3 ([P]: sRGB, [ _ ]: AdobeRGB) 2 5-character user-defined segment 4 3-character user-defined segment 5 File number (4 digits, 0001 to 9999) 6 Extension ¨[ ]¨[ [Select Folder]¢ ] ¨ Select [Folder / File Settings] Selects a folder for storing images.
4. Image Recording 0 Each folder can store up to 1000 files. 0 File numbers are assigned sequentially from 0001 to 9999 in the order of recording. If you change the storage folder, a number continuing on from the last file number will be assigned. 0 In the following cases, a new folder with an incremented folder number will be created automatically when the next file is saved: – The number of files in the current folder reaches 1000. – The file number reaches 9999.
4. Image Recording [File Number Reset] Refresh the folder number to reset the file number to 0001. ¨[ ]¨[ ] ¨ Select [File Number Reset] Settings: [Card Slot 1]/[Card Slot 2] 0 When the folder number reaches 999, the file number cannot be reset. We recommend backing up your data and formatting the card. 0 To reset the folder number to 100: 1 Perform [Card Format] to format the card. (l 50) 2 Perform [File Number Reset] to reset the file number. 3 Select [Yes] on the folder number reset screen.
5. Focus/Zoom Selecting the Focus Mode Select the focusing method (focus mode) to match subject movement. Set the focus mode lever. [S] ([AFS]) This is suitable for recording still subjects. When the shutter button is pressed halfway, the camera focuses once. The focus stays locked while the shutter button is pressed halfway. [C] ([AFC]) This is suitable for recording moving subjects.
5. Focus/Zoom Using AF AF (Auto Focus) refers to automatic focusing. Select the focus mode and the AF mode appropriate for the subject and scene. 1 Set the focus mode to [S] or [C]. ≥Set the focus mode lever. (l 96) 2 Select the AF mode. ≥Press [ ] to display the AF mode selection screen, and set using or . (l 103) ≥Selection is also possible by pressing [ ]. 0 In [iA] mode, each press of [ 3 ] switches between [ ] and [ ]. (l 83) Press the shutter button halfway. ≥The AF operates.
5. Focus/Zoom Focus In focus Not in focus Focus icon A Lights Blinking AF area B Green Red AF beep Two beeps — Low illumination AF 0 In dark environments, low illumination AF automatically operates, and the focus icon is indicated as [ LOW ]. 0 Achieving focus may take more time than usual. Starlight AF 0 If the camera detects stars in the night sky after determining low illumination AF, then Starlight AF will be activated.
5. Focus/Zoom Subjects and recording conditions that make focusing difficult with AF mode – Fast-moving subjects – Extremely bright subjects – Subjects without contrast – Subjects recorded through windows – Subjects near shiny objects – Subjects in very dark locations – When recording subjects both distant and near 0 You can change the operation of AF-ON so that AF prioritises subjects close by.
5. Focus/Zoom Magnify the AF Area Position ([AF-Point Scope]) This magnifies the focus point when the AF mode is [ ], [ ], or [ ]. (In other AF modes, the centre of the screen is magnified.) You can check focus and observe an enlarged subject as with a telephoto lens. 1 Register [AF-Point Scope] to the Fn button. (l 367) 2 Enlarge the AF area position by pressing and holding the Fn button. 0 When the screen is enlarged, pressing the shutter button halfway re-acquires focus in a small central AF area.
5. Focus/Zoom [AF Custom Setting(Photo)] Select features of AF operation when recording using [AFC] that are appropriate for the subject and scene. Each of these features can be further customised. 1 2 Set the focus mode to [AFC]. (l 96) Set [AF Custom Setting(Photo)]. ≥ ¨[ ]¨[ Setting(Photo)] ] ¨ [AF Custom [Set 1] Basic general-purpose setting. [Set 2] Suggested for situations where the subject moves at a constant speed in one direction.
5. Focus/Zoom Adjusting AF Custom Settings 1 Press 21 to select the AF Custom setting type. 2 Press 34 to select items and press 21 to adjust. 0 To reset settings to the default, press [DISP.]. or . 3 Press Sets the tracking sensitivity for the movement of subjects. [i] When the distance to the subject changes drastically, the camera re-adjusts the focus immediately. You can bring different subjects into focus one after another.
5. Focus/Zoom Selecting the AF Mode Select the focusing method to match the position and number of subjects. 1 Press [ 2 Select the AF mode. ]. ≥The AF mode selection screen appears. ≥Press 21 to select an item and then press or . ≥Selection is also possible by pressing [ ]. ヤヒ ヤビ ヤピ ¢ [Face/Eye/Body/ Animal Detect.] l 105 [Tracking] l 108 [225-Area] l 110 [Zone (Vert./ Horz.
5. Focus/Zoom 0 In [Time Lapse Shot], [ ] cannot be used. 0 When the focus mode is set to [AFC], [ ] is not available. 0 When the following function is being used, the AF mode is fixed to [ detection): – [Live Cropping] 0 When the following functions are being used, the AF mode is fixed to [ – [65:24]/[2:1] ([Aspect Ratio]) – [Miniature Effect] ([Filter Settings]) 0 The AF mode cannot be set when using Post-Focus.
5. Focus/Zoom [Face/Eye/Body/Animal Detect.] The camera detects a person’s face, eyes, and body (entire body or upper half of the body) and adjusts the focus. With the default settings, animal detection will also operate, enabling detection of animals, such as birds, canines (including wolves), and felines (including lions). When the camera detects a person’s face A/B or body or an animal’s body C, an AF area is displayed. Yellow AF area to be brought into focus. The camera selects this automatically.
5. Focus/Zoom Specify the Person, Animal, or Eye to Bring into Focus When the person or animal to be brought into focus is shown using the white AF area, you can change this to a yellow AF area. ≥Touch operation Touch the person, animal or eye indicated with the white AF area. 0 The AF area will change to yellow. 0 Touching outside the AF area displays the AF area setting screen. Touch [Set] to set the [ AF area at the position touched. 0 To cancel the setting, touch [ ]. ] ≥Button operation Press .
5. Focus/Zoom Move and Change the Size of the Yellow AF Area You can move the yellow AF area to the position of the white AF area and replace the white AF area with the yellow AF area. If moving to a position outside an AF area, then the [ ] AF area will be set. 1 Press [ ] to display the AF mode selection screen. 2 Select [ ] and then press 4. 3 Press 3421 to move the position of the AF area. or to change the size of the AF area. 5 Press .
5. Focus/Zoom [Tracking] When the focus mode is set to [AFC], the AF area follows the movement of the subject, maintaining focusing. Start tracking. ≥Aim the AF area over the subject, and press the shutter button halfway. The camera will track the subject while the shutter button is pressed halfway or pressed fully. 0 If tracking fails, the AF area blinks red. 0 When set to [AFS], the focus will be on the AF area position. Tracking will not work.
5. Focus/Zoom Move the Position of the AF Area 1 Press [ ] to display the AF mode selection screen. 2 Select [ ] and then press 4. 3 Press 3421 to move the position of the AF area. 0 Positions can be moved to the diagonal directions using the joystick. 0 You can also move the AF area by touching. 0 To return the position back to the centre, press [DISP.]. 4 Press .
5. Focus/Zoom [225-Area] The camera selects the most optimal AF area to focus from 225 areas. When multiple AF areas are selected, all selected AF areas will be brought into focus. When the focus mode is set to [AFC], ensuring that the subject stays within the 225 areas during recording will ensure the subject stays in focus. Specify the [AFC] Start Point When the focus mode is set to [AFC], you can specify at which area to start [AFC]. 1 Set the focus mode to [AFC].
5. Focus/Zoom [Zone (Vert./ Horz.)]/ (Oval)] [Zone (Square)]/ [Zone [Zone (Vert./ Horz.)] Within the 225 AF areas, vertical and horizontal zones can be focused. Horizontal pattern Vertical pattern [Zone (Square)] Within the 225 AF areas, a central square zone can be focused. [Zone (Oval)] Within the 225 AF areas, a central oval zone can be focused. 0[ ] is not displayed with default settings. Set [Zone (Square)] to [ON] in [Show/Hide AF Mode] in the [Custom] ([Focus/Shutter]) menu.
5. Focus/Zoom Move and Change the Size of the AF Area 1 Press [ ] to display the AF mode selection screen. 2 Select [ ], [ ] or [ ] and then press 4. 3 Press 3421 to move the position of the AF area. 0 You can also move the AF area by touching. ≥When [ ] is selected – Press 34 to switch to a horizontal pattern AF area. – Press 21 to switch to a vertical pattern AF area. ≥When [ ]/[ ] are selected – Positions can be moved to the diagonal directions using the joystick.
5. Focus/Zoom [1-Area+]/ [1-Area] [1-Area+] Emphasis within a single AF area can be focused. Even when the subject moves out of the single AF area, the subject remains focused in a supplementary AF area (A). 0 Effective when recording moving subjects that are difficult to track with [ ]. [1-Area] Specify the point to be brought into focus.
5. Focus/Zoom Move and Change the Size of the AF Area 1 Press [ ] to display the AF mode selection screen. 2 Select [ ] or [ ] and then press 4. 3 Press 3421 to move the position of the AF area. or of the AF area. 5 Press . 4 Rotate to change the size 0 Refer to “Operations on the AF area movement screen” on page 107 for information about detailed operations to move the AF area.
5. Focus/Zoom Move the Position of the AF Area 1 Press [ ] to display the AF mode selection screen. 2 Select [ ] and then press 4. 3 Press 3421 to set the position of [i] and then press or . 0 Positions can be moved to the diagonal directions using the joystick. 0 The selected position on the screen will be enlarged. 0 The AF area cannot be moved to the edge of the screen. 4 Press 3421 to fine-adjust the position of [i]. 5 Press or .
5. Focus/Zoom 0 When the picture is displayed in windowed mode, you can enlarge the picture by approx. 3k to 6k; when the picture is displayed in full screen, you can enlarge the picture by approx. 3k to 10k. 0 You can also take a picture by touching [ ].
5. Focus/Zoom 3 Select the AF area. ≥ Touch operation Touch the area to make the AF area. 0 To select consecutive points, drag the screen. 0 To cancel selection of the selected AF area, touch it again. ≥ Button operation Press 3421 to select the AF area and then set with or (Repeat this) 0 Positions can be moved to the diagonal directions using the joystick. 0 To cancel selection of the selected AF area, press or again. 0 To cancel all selections, press [DISP.]. 4 Press [Q]. .
5. Focus/Zoom AF Area Movement Operation In default settings, you can use the joystick to directly move and change the size of the AF area when recording. 1 Move the position of the AF area. ≥On the recording screen, tilt the joystick. 0 Pressing 2 enables switching between the default and set AF area positions. In [ ], this operation switches the person, animal or eye to be brought into focus. In [ ], this operation displays the enlarged screen. Change the size of the AF area. ≥Rotate or .
5. Focus/Zoom 3 Confirm your selection. ≥Press the shutter button halfway. ≥This will return you to the recording screen. 0 When [Metering Mode] is [ ], the metering target also moves together with the AF area. 0 In [ ], [ ], [ ], and [ ヤヒ ] to [ ヤピ ], the size of the AF area cannot be changed. 0 In [ ], it is not possible to move the AF area or change its size. 0 In the [iA] mode, the [ ] AF area cannot be moved.
5. Focus/Zoom Focus on the Touched Position ([AF]) 1 Touch the subject. 0 The AF area moves to the touched position. 2 Pinch out/pinch in to change the AF area size. 0 The first touch of [Reset] returns the AF area position to the centre. The second touch returns the size of the AF area to the default. 3 Touch [Set]. 0 In [ ], touch [Exit]. 0 For [ ], the AF area setting is cancelled if you touch [ ] on the recording screen.
5. Focus/Zoom Moving the AF Area Position with the Touch Pad During viewfinder display, you can touch the monitor to change the position and size of the AF area. 1 2 Set [Touch Pad AF]. ≥ ¨[ ]¨[ ] ¨ [Touch Settings] ¨ [Touch Pad AF] ¨ [EXACT]/[OFFSET1] to [OFFSET7] Move the position of the AF area. ≥During viewfinder display, touch the monitor. 3 Change the size of the AF area. ≥Rotate or . 0 Use for more detailed adjustments. 0 The first press of [DISP.
5. Focus/Zoom Setting Items ([Touch Pad AF]) [EXACT] Moves the AF area of the viewfinder by touching a desired position on the touch pad. Moves the AF area of the viewfinder according to the distance you drag [OFFSET1] your finger on the to touch pad. [OFFSET7] Select the range to be detected with the drag operation.
5. Focus/Zoom Record Using MF MF (Manual Focus) refers to manual focusing. Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate AF. 1 2 Set the focus mode lever to [MF]. Select the focus point. ≥Tilt the joystick to select the focus point. 0 To return the point to be brought into focus to the centre, press [DISP.]. 3 Confirm your selection. ≥Press .
5. Focus/Zoom 4 Adjust the focus. ≥Rotate the focus ring. A MF Assist (enlarged screen) 0 This will display the in-focus portion highlighted with colour. (Focus Peaking B) 0 A recording distance guideline is displayed. (MF Guide C) D Indicator for ¶ (infinity) (m)∞10 5 3 2 1.5 1 0.5 0.1 AF 5 Close the MF Assist screen. 6 Start recording. 124 ≥Press the shutter button halfway. ≥This operation can also be performed by pressing . ≥Press the shutter button fully.
5. Focus/Zoom Operations on the MF Assist Screen Button operation Touch operation 3421 Drag Pinch out/ pinch in s Description of operation Moves the enlarged display position. 0 Positions can be moved to the diagonal directions using the joystick. Enlarges/reduces the screen in small steps. Enlarges/reduces the screen. Switches magnification window (windowed mode/full screen mode). [DISP.] [Reset] [AF ON] AF First time: Returns the MF Assist position to the centre.
5. Focus/Zoom 0 On the recording screen, you can rotate the focus ring to display the MF Assist screen. If the focus ring has been rotated to enlarge the display, the assist screen will be exited a short time after you cease the operation. 0 You can also display the MF Assist screen by pressing the [ ]. 0 During MF, pressing [AF ON] will activate AF. 0 The recording distance reference mark is a mark used to measure the recording distance. Use this when taking pictures with MF or taking close-up pictures.
5. Focus/Zoom Recording with Zoom Use the optical zoom of the lens to zoom to telephoto or wide-angle. When taking pictures, use [Ex. Tele Conv.] to increase a telescopic effect without image deterioration. When recording videos, use [Image Area of Video] to obtain the same telescopic effect as [Ex. Tele Conv.]. 0 For details about [Image Area of Video], refer to page 266. Rotate the zoom ring. T: Telephoto W: Wide-angle ≥ Rotating the zoom ring displays the focal length on the recording screen.
5. Focus/Zoom Extra Tele Conversion [Ex. Tele Conv.] enables you to take pictures that are further enlarged beyond what is available with the optical zoom, without any deterioration in image quality. 0 The [Ex. Tele Conv.] maximum magnification ratio differs depending on the [Picture Size] set in the [Photo] ([Image Quality]) menu. – Set to [ M]: 1.4k – Set to [ S]: 2.0k (1.9k when using Super 35 mm/APS-C lenses) 1 Set [Picture Size] to [M] or [S]. 2 Set [Ex. Tele Conv.].
5. Focus/Zoom Changing the Zoom Magnification Button operation 1 Set [Ex. Tele Conv.] to [ZOOM]. ¨[ 0 ]¨[ ] ¨ [Ex. Tele Conv.] ¨ [ZOOM] 2 Set the Fn button to [Zoom Control]. (l 367) 3 Press the Fn button. 4 Press the cursor buttons to operate the zoom. EXS 31: T (telephoto) 24: W (wide-angle) 0 Press the Fn button again, or wait a EX1.8x specified time to end zoom operation. 0 Displayed zoom magnifications A are approximate.
5. Focus/Zoom 4 Drag the slide bar to operate the zoom. T: Telephoto W: Wide-angle 0 To end Touch Zoom operations, touch [ ] again. 0 You can register functions to Fn buttons: [ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Ex. Tele Conv.] (l 367) 0 When displaying the [Ex. Tele Conv.] setting screen using the Fn button, pressing [DISP.] allows you to change the [Picture Size] setting. 0 When the following functions are being used, [Ex. Tele Conv.
6. Drive/Shutter/Image Stabiliser Selecting the Drive Mode You can switch the drive mode to Single, Burst, etc. to match the recording conditions. Rotating the drive mode dial. [ [ ] ]/[ ] Single Takes one picture each time the shutter button is pressed. Burst (l 132, 136) Takes pictures continuously while the shutter button is pressed and held. 6K/4K photo recording is also possible. Takes pictures with Time Lapse Shot or Stop Motion Animation.
6. Drive/Shutter/Image Stabiliser Taking Burst Pictures Takes pictures continuously while the shutter button is pressed and held. You can choose a burst setting which enables burst recording in high image quality, [H], [M] or [L], or one which enables high-speed burst recording, [ ] (6K/4K photo), to suit the recording conditions. 1 Set the drive mode dial to [ ] (Burst Shot 1) or [ ] (Burst Shot 2). 0 Configure the burst settings for each of [ 2 ] and [ ]. Select the burst rate.
6.
6. Drive/Shutter/Image Stabiliser Number of Pictures That Can Be Taken Continuously When you press the shutter button halfway, the number of pictures that can be taken continuously will appear on the recording screen and the status LCD. ISO100 r20 Example) When 20 frames: [r20] 0 Once recording starts, the number of pictures that can be taken continuously will decrease. When [r0] appears, the burst rate decreases.
6. Drive/Shutter/Image Stabiliser Exposure when Taking Burst Pictures Focus mode [H] [AFS] Fixed to the exposure of the first frame [AFC] The exposure is adjusted for each frame [MF] Fixed to the exposure of the first frame [M]/[L] The exposure is adjusted for each frame 0 It may take a while to save burst pictures. If you continue to take burst pictures while saving is in progress, the maximum number of frames recordable will be reduced.
6. Drive/Shutter/Image Stabiliser 6K/4K Photo Recording With 6K Photo, you can take high-speed burst pictures at 30 frames/ second and save the desired pictures, each made up of approx. 18 million pixels, extracted from their burst file. With 4K photo, you can take high-speed burst pictures at 60 frames/ second and save the desired pictures, each made up of approx. 8 million pixels.
6. Drive/Shutter/Image Stabiliser 3 Select [Picture Size / Burst Speed]. ≥ ¨[ ]¨[ ] ¨ [6K/4K PHOTO] ¨ [Picture Size / Burst Speed] Picture size [6K 18M] [4K H 8M] [4K 8M] 4 ¢ Burst rate [Rec Quality]¢ [4:3]: [3:2]: 4992k3744 5184k3456 30 frames/ second [6K/200M/30p] [4:3]: [3:2]: [16:9]: [1:1]: 3328k2496 3504k2336 3840k2160 2880k2880 60 frames/ second [4K/150M/60p] 30 frames/ second [4K/100M/30p] Saved as 6K/4K burst files whose [Rec. File Format] is [MP4]. Select [Rec Method].
6. Drive/Shutter/Image Stabiliser [ ][ ][ ] ([6K/4K Burst(S/S)]) “S/S” is an abbreviation for start/stop. When you wish to capture an unpredictable photo opportunity Starts taking burst pictures when the shutter button is pressed. Pressing the button again stops taking burst pictures. The start tone and stop tone are output. Audio recording: Available¢ [ ][ ][ ] ([6K/4K Pre-Burst]) When you wish to capture at the moment of a photo opportunity Takes burst pictures for approx.
6. Drive/Shutter/Image Stabiliser [6K/4K Burst(S/S)] 1 2 Press the shutter button fully to start recording. Press the shutter button fully again to stop recording. C Start (First) D Stop (Second) E Recording is performed 0 You can add markers by pressing [Q] during recording. (Up to 40 markers per recording) This allows you to skip to the positions where you added markers when selecting pictures from a 6K/4K burst file. [6K/4K Pre-Burst] Press the shutter button fully. F Approx.
6. Drive/Shutter/Image Stabiliser [Pre-Burst Recording] ([6K/4K Burst]/[6K/4K Burst(S/S)]) The camera starts recording approx. 1 second before the shutter button is pressed fully, so you will not miss a photo opportunity. ¨[ ]¨[ ] ¨ [6K/4K PHOTO] ¨ Select [Pre-Burst Recording] Settings: [ON]/[OFF] 0 When [Pre-Burst Recording] is being used, [PRE] is displayed on the recording screen.
6. Drive/Shutter/Image Stabiliser 0 The following functions are restricted when recording 6K/4K photos when connected to an external device (TV, etc.) via HDMI: – HDMI output is not possible during recording. – [6K/4K Pre-Burst] changes to [6K/4K Burst]. – [Pre-Burst Recording] is not available.
6. Drive/Shutter/Image Stabiliser Selecting Pictures from a 6K/4K Burst File You can select pictures from the 6K/4K burst files and save them. 0 When continuing to select pictures from the Auto Review after recording 6K/4K photos, start the operation from either Step or . 2 3 1 Select a 6K/4K burst file on the playback screen. (l 347) ≥Select an image with the [ ] or [ ] icon and then press 3. ≥You can also perform the same operation by touching [ ] or [ ].
6. Drive/Shutter/Image Stabiliser 4 Save the picture. ≥Touch [ ] or [ ]. ≥A confirmation screen appears. 0 The picture is saved in JPEG format ([FINE] picture quality). 0 The recording information (Exif information), such as the shutter speed, aperture, and ISO sensitivity, is also saved with the picture that is saved.
6. Drive/Shutter/Image Stabiliser Reducing Noise Caused by High Sensitivity ([6K/4K PHOTO Noise Reduction]) When saving pictures, reduce the noise that occurs due to high ISO sensitivity. ¨[ ]¨[ ] ¨ Select [6K/4K PHOTO Noise Reduction] Settings: [AUTO]/[OFF] 0 This is not applied to pictures saved with [6K/4K PHOTO Bulk Saving].
6. Drive/Shutter/Image Stabiliser Button operation Touch operation Drag/ 21/ 21 Press and hold s Continuously rewinds or forwards frame-byTouch and hold frame. Touch/drag Pinch out/ pinch in / s 3421 Drag [ Selects the frame to display. Enlarges or reduces the display. Selects a frame while maintaining the enlarged display (during enlarged display). Moves the enlarged display position (during enlarged display). ] Displays the 6K/4K burst playback screen. Switches to marker operation.
6. Drive/Shutter/Image Stabiliser 6K/4K Burst Playback Screen Operations While paused Button operation During continuous playback Touch operation Description of operation 3 s Performs continuous playback or pauses (during continuous playback). 4 s Performs continuous rewind playback or pauses (during continuous rewind playback). 1/ / s Performs fast-forward playback or performs frame-by-frame forwarding (while paused).
6. Drive/Shutter/Image Stabiliser Displays the in-focus portion highlighted with colour ([Focus Peaking]). 0 [ON]/[OFF] switches. s / / Saves the picture (while paused). 0 During marker operation, you can skip to set markers or the beginning or end of the 6K/4K burst file. Touch [ ] to return to the previous operation. Button operation Touch operation 1 s Moves to the next marker. 2 s Moves to the previous marker.
6. Drive/Shutter/Image Stabiliser [6K/4K PHOTO Bulk Saving] You can save any 5 second period of pictures from a 6K/4K burst file all at once. 1 Select [6K/4K PHOTO Bulk Saving]. 0 ¨[ ]¨[ ] ¨ [6K/4K PHOTO Bulk Saving] 2 Press 21 to select a 6K/4K burst file and then press or . 0 If the burst time is 5 seconds or less, all frames are saved as pictures. 3 Select the first frame of the pictures to be saved all at once and then press or .
6. Drive/Shutter/Image Stabiliser Recording with Time Lapse Shot Pictures are taken automatically at a set recording interval. This feature is ideal for keeping track of changes over time in subjects such as animals and plants. The pictures taken will be saved as a set of group images that can also be combined into a video. 0 Check that the clock is set correctly. (l 56) 0 For long recording intervals, we recommend setting [Lens Focus Resume] to [ON] in the [Custom] ([Lens / Others]) menu.
6. Drive/Shutter/Image Stabiliser 3 Set the recording settings. [Mode] Switches between Time Lapse Shot and Stop Motion Animation. [Shooting Interval Setting] [Start Time] [ON] Sets the interval before the next recording takes place. [OFF] Takes pictures without leaving recording intervals. [Now] Starts recording when the shutter button is pressed fully. [Start Time Set] [Image Count]/ [Shooting Interval] [Exposure Leveling] Starts recording at the set time.
6. Drive/Shutter/Image Stabiliser 6 Create a video. (l 156) 0 After the recording has stopped, select [Yes] on the confirmation screen to proceed to create a video. Even if you select [No], you can still create a video with [Time Lapse Video] in the [Playback] ([Process Image]) menu. (l 459) Operations during Time Lapse Shot Recording Pressing the shutter button halfway during sleep status will turn on the camera.
6. Drive/Shutter/Image Stabiliser 0 Pictures recorded to more than one card cannot be combined into a single video. 0 Pictures taken with [HLG Photo] cannot be converted to videos. 0 The camera gives priority to achieving the correct exposure, so it may not take pictures at the set interval or take the set number of pictures. Furthermore, it may not end at the end time displayed on the screen. 0 Time Lapse Shot is paused in the following cases.
6. Drive/Shutter/Image Stabiliser Recording with Stop Motion Animation Take pictures while moving the subject little by little. The pictures taken will be saved as a set of group images that can be combined into a stop motion video. 1 2 Set the drive mode dial to [ ]. Set [Mode] to [Stop Motion Animation]. ≥ 3 ¨[ ]¨[ ] ¨ [Time Lapse/Animation] ¨ [Mode] ¨ [Stop Motion Animation] Set the recording settings. [Mode] [Add to Picture Group] Switches between Time Lapse Shot and Stop Motion Animation.
6. Drive/Shutter/Image Stabiliser 4 Close the menu. 5 Start recording. ≥Press the shutter button halfway. ≥Press the shutter button fully. ≥Take pictures repeatedly while moving the subject little by little. 0 The recording screen displays up to two pictures taken previously. Use them as reference for the amount of movement. 0 You can play back the recorded stop motion images by pressing [(] during recording. Press [ ] to delete unnecessary images. To return to the recording screen, press [(] again.
6. Drive/Shutter/Image Stabiliser 0 Pictures taken with [HLG Photo] cannot be converted to videos. 0 Up to 9999 frames can be recorded. 0 If the camera is turned off while recording, a message for resuming the recording is displayed when it is turned on. Selecting [Yes] allows you to continue the recording from the interruption point. 0 The camera gives priority to achieving the correct exposure, so it may not take pictures at the set interval when the flash, etc. is used for recording.
6. Drive/Shutter/Image Stabiliser Time Lapse Shot/Stop Motion Animation Videos After performing Time Lapse Shot or stop motion recording, you can proceed to create a video. 0 Refer to the sections below about these recording functions. – Time Lapse Shot recording: l 149 – Stop motion recording: l 153 0 You can also create videos with [Time Lapse Video] (l 459) or [Stop Motion Video] (l 459) in the [Playback] menu. 1 Select [Yes] on the confirmation screen that appears after recording.
6. Drive/Shutter/Image Stabiliser 0 Videos cannot be created when the [System Frequency] is set to [24.00Hz (CINEMA)]. 0 Videos cannot be created if the recording time exceeds 29 minutes and 59 seconds.
6. Drive/Shutter/Image Stabiliser Recording Using the Self-timer 1 2 Set the drive mode dial to [ ]. Decide on the composition and then adjust the focus. ≥Press the shutter button halfway. 0 The focus and exposure are fixed when the shutter button is pressed halfway. 3 158 Start recording. ≥Press the shutter button fully. ≥The self-timer light blinks and then the shutter is released.
6. Drive/Shutter/Image Stabiliser Setting the Self-timer Time ¨[ ]¨[ ] ¨ Select [Self Timer] [ ] [ ] Takes 3 pictures at approx. 2 second intervals after 10 seconds. ] Takes a picture after 2 seconds. 0 This setting is a convenient way to avoid camera shake caused by pressing the shutter button. [ Takes a picture after 10 seconds. 0 We recommend using a tripod when recording with the self-timer.
6. Drive/Shutter/Image Stabiliser Bracket Recording When the shutter button is pressed, the camera can record multiple images while automatically changing the setting value for exposure, aperture, focus or white balance (adjustment value or colour temperature). 0 Aperture Bracket can be selected in the following modes: – [A] mode – [M] mode (when ISO sensitivity is set to [AUTO]) 0 White Balance Bracket (Colour Temperature) can be selected when the white balance is set to [ 1 ], [ 2 ], [ 3 ], or [ 4 ].
6. Drive/Shutter/Image Stabiliser Setting Items ([Bracketing Type]) [ ] Exposure Bracket When the shutter button is pressed, the camera records while changing the exposure. (l 163) [ ] Aperture Bracket When the shutter button is pressed, the camera records while changing the aperture value. (l 163) [ ] Focus Bracket When the shutter button is pressed, the camera records while changing the focus point.
6. Drive/Shutter/Image Stabiliser 0 When [Aspect Ratio] is set to [65:24]/[2:1], only the Exposure Bracket can be used. 0 White Balance Bracket and White Balance Bracket (Colour Temperature) are not available when using the following functions: – [iA] mode – Taking burst pictures – [RAWiFINE]/[RAWiSTD.
6. Drive/Shutter/Image Stabiliser [More Settings] (Exposure Bracket) Sets the image count and exposure compensation step. [3•1/3] (record 3 images in 1/3 EV steps) to [7•1] (record 7 images in 1 EV steps) [Step] [Sequence] Sets the order in which images are recorded. [Single Shot Setting] [ ]: Takes only one image each time the shutter button is pressed. [ ]: Takes all of the set number of images when the shutter button is pressed once.
6. Drive/Shutter/Image Stabiliser [More Settings] (Focus Bracket) Sets the focus adjustment step. [Step] 0 The distance that the focus point is moved becomes shorter if the initial focus point is close, and longer if it is far away. [Image Count] [Sequence] Sets the image count. 0 This cannot be set when taking burst pictures. Burst pictures are taken while the shutter button is pressed.
6. Drive/Shutter/Image Stabiliser [More Settings] (White Balance Bracket) Rotate , or to set the correction step and then press G or . Rotate to the right: Horizontal direction ([A] - [B]) Rotate to the left: Vertical direction ([G] - [M]) 0 The correction step can also be set by touching [ ]/[ ]/[ ]/[ ]. A M [More Settings] (White Balance Bracket (Colour Temperature)) Rotate , or to set the correction step and then press or .
6. Drive/Shutter/Image Stabiliser Post-Focus Recording Taking burst pictures with the same image quality as 6K/4K photos while automatically changing the focus point. You can select the focus point for the picture to save after recording. Also Focus Stacking lets you combine images with multiple focus points. This function is suitable for subjects that do not move. Perform burst 6K/4K photo recording while automatically shifting the focus. Touch the desired focus point.
6. Drive/Shutter/Image Stabiliser 2 3 Close the menu. ≥Press the shutter button halfway. Decide on the composition and then adjust the focus. ≥Press the shutter button halfway. ≥AF detects the focus point on the screen. (Excluding the edges of the screen) 60 F4.0 ±0 ISO10 0 If no areas on the screen can be brought into focus, the focus indication A blinks and recording is not possible. 0 Maintain the same distance to the subject and the same composition until recording finishes.
6. Drive/Shutter/Image Stabiliser 0 Since recording is performed with the same image quality as 6K/4K photos, limitations apply to recording functions and menus. 0 Focus settings cannot be changed during Post-Focus recording. 0 When using Super 35 mm/APS-C lenses, [6K 18M] is not available.
6. Drive/Shutter/Image Stabiliser Selecting the Focus Point for the Picture to Save 1 Select a Post-Focus image on the playback screen. (l 347) ≥Select an image with the [ ] icon and then press 3. ≥You can also perform the same operation by touching the [ ] icon. 2 Touch the focus point. 0 When the point is in focus, a green frame appears. 0 If there is no picture with the selected 3 point in focus, a red frame appears. A picture cannot be saved. 0 The edge of the screen cannot be selected.
6. Drive/Shutter/Image Stabiliser Focus Point Selection Operations Button operation Touch operation 3421/ / Touch Description of operation Selects a focus position. 0 Selection is not possible during enlarged display. Enlarges the display. 0 During enlarged display, you can fine-adjust the focus by dragging the slide bar. (You can also perform the same operation by pressing 21.) Reduces the display (during enlarged display). [ ] Switches to Focus Stacking operation.
6. Drive/Shutter/Image Stabiliser Focus Stacking By merging multiple focus points, you can save pictures that are focused from the foreground through to the background. A Focus: closer B Focus: more distant 1 On the screen for selecting the focus point in Step 2 on page 169, touch [ ]. ≥You can also perform the same operation by pressing [ ]. 2 Select the merging method. [Auto Merging] Automatically selects pictures suitable for merging and then merges them into a single picture.
6. Drive/Shutter/Image Stabiliser 3 (When [Range Merging] is selected) Touch the focus points. 6HW &DQFHO 0 Select at least two points. 4 172 Selected points are indicated with a green frame. 0 The in-focus range between the two selected points is displayed in green. 0 Ranges that cannot be selected are displayed in grey. 0 To cancel the selection, touch a point with a green frame again. 0 To select consecutive points, drag the screen. Save the picture. ≥Touch [ ].
6. Drive/Shutter/Image Stabiliser Operations when [Range Merging] Is Selected Button operation Touch operation 3421 / / / Touch [ ] Selects a point. [Set/Cancel] Sets or cancels a point. [All] Selects all points. (Before selecting points) [DISP.] [Reset] / Description of operation Cancels all selections. (After selecting points) Merges the pictures and saves the resulting picture.
6. Drive/Shutter/Image Stabiliser [Silent Mode] This disables all operation sounds and light output at once. The audio from the speaker will be muted and the flash and the AF assist light will be set to forced off mode. 0 The following settings are fixed: – – – – – – – – [Flash Mode]: [Œ] (Forced Flash Off) [AF Assist Light]: [OFF] [Shutter Type]: [ELEC.
6. Drive/Shutter/Image Stabiliser [Shutter Type] Selects the shutter type to use for taking pictures. ¨[ ]¨[ ] ¨ Select [Shutter Type] [AUTO] Switches the shutter type automatically depending on the recording conditions and shutter speed. [MECH.] Records with the mechanical shutter type. [EFC] [ELEC.] [ELEC.+NR] Mechanism Records with the electronic front curtain type. Records with the electronic shutter type. Records with the electronic shutter type.
6. Drive/Shutter/Image Stabiliser 0 The electronic front curtain type reduces blur caused by the shutter because the amount of vibration from the shutter is small compared to the mechanical shutter type. 0 The electronic shutter type allows you to record without vibration from the shutter.
6. Drive/Shutter/Image Stabiliser Image Stabiliser This camera can use both the in-body image stabiliser and the in-lens image stabiliser. Of the Dual I.S. modes that effectively combine two image stabilisers, this supports Dual I.S.2 with high correction efficiency. Furthermore, during video recording, you can use the 5-Axis Hybrid Image Stabiliser that incorporates electronic stabilisation.
6. Drive/Shutter/Image Stabiliser Using the Image Stabiliser 0 When using a lens with an O.I.S. switch, set the switch on the lens to [ON]. 0 When using a lens that does not have a communication function with this camera, after turning on the camera, a message asking for confirmation of the lens information is displayed. For the image stabiliser function to operate correctly, it is necessary to set the image circle, focal length, and image stabiliser range to suit the lens.
6. Drive/Shutter/Image Stabiliser Image Stabiliser Settings Set the image stabiliser operation to match the recording situation. ¨[ ]¨[ [Operation Mode] [Body(B.I.S.) / Lens(O.I.S.)] ] ¨ Select [Image Stabilizer] Sets the stabilisation movement (blur) to match the recording method (normal, panning). (l 181) [ ] ([Body]) Uses the in-body image stabiliser. [ ] ([Lens]) Uses the in-lens image stabiliser. 0 This can be set when using other manufacturer’s lenses with an image stabilisation function.
6. Drive/Shutter/Image Stabiliser 0 When the following functions are being used, [When to Activate] is fixed to [ALWAYS]: –[ ] ([Body(B.I.S.) / Lens(O.I.S.)]) –[ ] mode – Video recording/[6K/4K PHOTO]/[Post-Focus] 0 When the following functions are being used, [E-Stabilization (Video)] is not available: – 6K video/5.9K video/5.
6. Drive/Shutter/Image Stabiliser [Operation Mode] Set the stabilisation movement (blur) to match the recording method (normal, panning). [Normal] Corrects vertical, horizontal, and rotational camera shake. This function is suitable for normal recording. Automatically detects the panning direction, and corrects [Panning (Auto)] vertical and horizontal camera shake. This function is suitable for panning. [OFF] [Panning (Left/ Right)] Corrects vertical camera shake.
6. Drive/Shutter/Image Stabiliser [Boost I.S. (Video)] Increase the effectiveness of the image stabiliser during video recording. This effect can help provide a stable composition when you want to perform recording from a fixed perspective. Settings: [ON]/[OFF] 0 When [Boost I.S. (Video)] is operating, [ ] is displayed on the recording screen. 0 To change composition while recording, first set this to [OFF] before moving the camera. To set this to [OFF] during recording, use the Fn button.
6. Drive/Shutter/Image Stabiliser [Lens Information] Register the information for lenses that cannot communicate with the camera. Match the in-body image stabiliser with the information of the lens you register. The settings on this camera enable you to switch settings to suit full-frame or Super 35 mm/APS-C lenses. (l 24) Press 34 to select the lens information to use and then press or .
6. Drive/Shutter/Image Stabiliser [Image Circle] Select the image circle for the lens. [FULL]: Full-frame lens [S35mm]: Lens for Super 35 mm/lens for APS-C [Focal Length] 0 The live view images can be enlarged for display when you [I.S. Area] You can set the range of stabilisation for the image stabiliser so that vignetting does not occur due to the image stabiliser. [70%]/[80%]/[90%]/[100%] 0 Rotate to select the range of stabilisation, then press or to confirm.
7. Metering/Exposure/ISO Sensitivity [Metering Mode] Type of optical measurement to measure brightness can be changed. ¨[ ]¨[ ] ¨ Select [Metering Mode] [ ] (Multi-metering) Method in which the most suitable exposure is measured by judging the allocation of brightness on the whole screen. [ ] (Centreweighted) Method used to perform measuring which focuses on the centre of the screen. [ ] (Spot) Method used to measure the extremely small part around the spot-metering target A.
7. Metering/Exposure/ISO Sensitivity Programme AE Mode In [P] mode (Programme AE mode), the camera automatically sets the shutter speed and aperture value for the brightness of the subject. You can also use Programme Shift to change combinations of shutter speed and aperture values while keeping the same exposure. 1 2 Set the mode dial to [P]. Press the shutter button halfway. ≥This displays the aperture value A and shutter speed value B on the recording screen.
7. Metering/Exposure/ISO Sensitivity Programme Shift You can change the shutter speed and aperture value combination set automatically by the camera while maintaining the same exposure. With this, you can, for example, make the background more defocused by decreasing the aperture value or capture a moving subject more dynamically by slowing the shutter speed. 1 Press the shutter button halfway. 0 This displays the aperture value and shutter speed value on the recording screen. (Approx.
7. Metering/Exposure/ISO Sensitivity Aperture-Priority AE Mode In [A] mode (Aperture-Priority AE mode), you can set the aperture value before recording. The shutter speed will be automatically set by the camera. Smaller aperture values Larger aperture values It becomes easier to defocus the background. It becomes easier to bring everything into focus including the background. 1 188 Set the mode dial to [A].
7. Metering/Exposure/ISO Sensitivity 2 Set the aperture value. 3 Start recording. ≥Rotate or . 0 If the correct exposure is not achieved when the shutter button is pressed halfway, the aperture value and the shutter speed blink red. F8.
7. Metering/Exposure/ISO Sensitivity 0 The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview]. (l 196) 0 The brightness of the recording screen and of actual recorded images may differ. Check the images on the playback screen. 0 When using a lens with an aperture ring, set the position of the aperture ring to other than [A] to use the aperture value of the lens.
7. Metering/Exposure/ISO Sensitivity Shutter-Priority AE Mode In [S] mode (Shutter-Priority AE mode), you can set the shutter speed before recording. The aperture value will be automatically set by the camera. Slower shutter speeds Faster shutter speeds It becomes easier to capture motion It becomes easier to freeze motion 1 Set the mode dial to [S]. 2 Set the shutter speed. ≥Rotate or .
7. Metering/Exposure/ISO Sensitivity 3 Start recording. 0 If the correct exposure is not achieved when the shutter button is pressed halfway, the aperture value and the shutter speed blink red. 250 0 The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview]. (l 196) 0 The brightness of the recording screen and of actual recorded images may differ. Check the images on the playback screen.
7. Metering/Exposure/ISO Sensitivity Manual Exposure Mode In [M] mode (Manual Exposure mode), you can take pictures by manually setting the aperture value and shutter speed. In default settings, the ISO sensitivity is set to [AUTO]. As a result, the ISO sensitivity will be adjusted according to the aperture value and shutter speed. Exposure compensation can also be used when ISO sensitivity is set to [AUTO]. 1 2 Set the mode dial to [M]. Set the aperture value and shutter speed.
7. Metering/Exposure/ISO Sensitivity Available Shutter Speeds (Sec.) [MECH.] [B] (Bulb, max. approx. 30 minutes), 60 to 1/8000 [EFC] [B] (Bulb, max. approx. 30 minutes), 60 to 1/2000 [ELEC.] [B] (Bulb, max. approx. 60 seconds), 60 to 1/8000 0 The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview]. (l 196) You can set the preview mode to operate constantly in [M] mode.
7. Metering/Exposure/ISO Sensitivity [B] (Bulb) If you set the shutter speed to [B] (Bulb), the shutter stays open while the shutter button is pressed fully. (up to approx. 30 minutes) The shutter closes when the shutter button is released. Use this when you want to keep the shutter open for a long time to record images of fireworks, night scenery or a starry sky. 0 We recommend using a tripod or the Shutter Remote Control (DMW-RS2: optional) during bulb recording.
7. Metering/Exposure/ISO Sensitivity Preview Mode You can check the effects of aperture on the recording screen by physically closing the aperture blades of the lens to the aperture value set for actual recording. In addition to the effects of aperture, you can check the effects of shutter speed at the same time. 0 Use the Fn button registered with [Preview] to operate. In default settings, this is registered in the [Fn2] button. For information about the Fn button, refer to page 367.
7. Metering/Exposure/ISO Sensitivity Exposure Compensation You can compensate the exposure when the correct exposure determined by the camera is too bright or too dark. You can adjust the exposure in 1/3 EV steps in a range of n5 EV. When recording videos or recording with 6K/4K photo or Post-Focus, the range changes to n3 EV. 1 2 Press [ ]. Compensate the exposure. ≥Rotate , , or 2 1 . 2 2 +1 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 3 Confirm your selection. ≥Press the shutter button halfway.
7. Metering/Exposure/ISO Sensitivity 0 In [M] mode, you can compensate the exposure by setting the ISO sensitivity to [AUTO]. 0 When [Auto Exposure Comp.] is set to [ON], the flash output will automatically be set to the level appropriate to the exposure compensation. 0 When the exposure compensation value falls below or exceeds n3 EV, the brightness of the recording screen will no longer change. Press the shutter button halfway or use AE Lock to reflect the value on the recording screen.
7. Metering/Exposure/ISO Sensitivity Locking Focus and Exposure (AF/AE Lock) Lock the focus and exposure in advance to take pictures with the same focus and exposure settings while changing the composition. This is useful when you want to bring an edge of the screen into focus or there is a backlight, for example. 1 Register [AE LOCK], [AF LOCK], or [AF/AE LOCK] to the Fn button. (l 367) 0 These cannot be registered to [Fn3] to [Fn7]. [AE LOCK] [AF LOCK] [AF/AE LOCK] 2 3 The exposure is locked.
7. Metering/Exposure/ISO Sensitivity ISO Sensitivity You can set light sensitivity (ISO sensitivity). With the default settings, you can set 100 to 51200 in 1/3 EV increments. This camera supports Dual Native ISO which enables recording at high sensitivity with reduced noise by switching the base sensitivity. The base sensitivity can also be fixed as necessary. 1 2 Press [ISO]. Select ISO sensitivity. 1 2 ≥Rotate , , or . ≥Selection is also possible by pressing [ISO].
7. Metering/Exposure/ISO Sensitivity Characteristics of the ISO Sensitivity By increasing the ISO sensitivity, the shutter speed can be increased in dark places to prevent camera shake and subject blur. However, higher ISO sensitivities also increase the amount of noise in the recorded images. Setting Items (ISO Sensitivity) [AUTO] The ISO sensitivity is automatically adjusted according to the brightness.
7. Metering/Exposure/ISO Sensitivity 0 You can set upper and lower limits for ISO Auto: 0 0 0 0 0 0 202 –[ ]¨[ ] ¨ [ISO Sensitivity (photo)] (l 398) –[ ]¨[ ] ¨ [ISO Sensitivity (video)] (l 282) You can change the intervals between ISO sensitivity settings values: [ ]¨[ ] ¨ [ISO Increments] (l 418) The setting range of ISO sensitivity can be extended: [ ]¨[ ] ¨ [Extended ISO] (l 419) You can set the lower limit for shutter speed for ISO Auto: [ ]¨[ ] ¨ [Min.
7. Metering/Exposure/ISO Sensitivity [Dual Native ISO Setting] You can set whether to switch the base sensitivity automatically or to fix it. ¨[ [AUTO] ]¨[ ] ¨ Select [Dual Native ISO Setting] The base sensitivity is automatically switched according to the brightness. ISO sensitivity [AUTO] / [100] to [51200]. that can be set When [Extended ISO] is set: [AUTO] / [50] to [204800]. Sets the base sensitivity for low sensitivity. [LOW] ISO sensitivity [AUTO] / [100] to [800].
8. White Balance/Image Quality White Balance (WB) White balance (WB) is a function that corrects the colour cast produced by the light illuminating the subject. It corrects the colours so that white objects appear in white to make the overall colour closer to what is seen by the eye. Normally, you can use auto ([AWB], [AWBc] or [AWBw]) to obtain the optimal white balance.
8. White Balance/Image Quality 3 Confirm your selection. ≥Press the shutter button halfway.
8. White Balance/Image Quality 1 [AWB] will work within this range. 2 Blue sky 3 Cloudy sky (Rain) 4 Shade 5 Sunlight 6 White fluorescent light 7 Incandescent light bulb 8 Sunrise and sunset 9 Candlelight KlKelvin Colour Temperature 0 Under lighting such as fluorescent or LED lighting, the appropriate white balance will vary depending on the lighting type. Use [AWB], [AWBc], [AWBw] or [ 1 ] to [ 4 ]. 0 The white balance is fixed to [AWB] while [Filter Settings] is being used.
8. White Balance/Image Quality Registering the White Set ([ 1 ] to [ 4 ]) Take pictures of a white object under the light source of the recording location to adjust the white balance until it appears white. 1 Press [WB] and then select any value from [ 1 ] to [ 4 ]. 2 Press 3. 3 Aim the camera at a white object so that it appears inside the frame at the centre of the screen and then press or . 0 This will set the white balance and return you to the recording screen.
8. White Balance/Image Quality Adjusting the White Balance You can adjust the colouring even when the colouring you want to apply is not produced by the selected white balance. 1 2 3 Press [WB]. Select the white balance and then press 4. ≥The adjustment screen is displayed. Adjust the colouring. 2: 3: 1: 4: G [A] (AMBER: ORANGE) [G] (GREEN: GREENISH) [B] (BLUE: BLUISH) [M] (MAGENTA: REDDISH) A B M 0 You can also make adjustments in diagonal directions by using the joystick.
8. White Balance/Image Quality 4 Confirm your selection. ≥Press the shutter button halfway. 0 When the white balance is adjusted, the colour of its recording screen icon changes to the adjusted colour. Adjusting toward the [G] side will display [i], while adjusting toward the [M] side will display [j].
8. White Balance/Image Quality [Photo Style] You can select the finishing settings of images to suit your subjects and expression styles. The image quality can be adjusted for each Photo Style. ¨[ 210 ]¨[ ] ¨ Select [Photo Style] [Standard] The standard setting. [Vivid] A setting that produces a more vivid quality with higher saturation and contrast. [Natural] A setting that produces a softer quality with lower contrast.
8. White Balance/Image Quality [Like709] A setting that minimises overexposure by applying a gamma curve correction equivalent to Rec.709 to perform compression (knee adjustment) of high-luminance areas. 0 Rec.709 is an abbreviation of “ITU-R Recommendation BT.709”, a standard for highdefinition broadcasting. [V-Log] Gamma curve setting intended for postproduction processing. 0 It allows you to add rich gradation to images during post production editing.
8. White Balance/Image Quality 0 In [iA] mode, operation differs from that in other recording modes. – [Standard] or [Monochrome] can be set. – The setting will be reset to [Standard] when the camera is switched to another recording mode or it is turned off. – Image quality cannot be adjusted.
8. White Balance/Image Quality Adjusting Image Quality 1 Press 21 to select the type of Photo Style. 2 Press 34 to select an item and then 6WDQGDUG press 21 to adjust. 0 Adjusted items are indicated with [¢]. 3 Press or . 0 When the image quality is adjusted, the Photo Style icon on the recording screen is indicated with [¢]. -5 0 +5 ±0 ±0 ±0 ±0 ±0 Settings Items (Image Quality Adjustment) [Contrast]¢1 Adjusts the contrast in the image. [Highlight]¢1 Adjusts the brightness of bright areas.
8. White Balance/Image Quality [Grain Effect] ¢4 [Low]/ [Standard]/ [High] Sets the grain effect level. [Off] S s [Sharpness] Adjusts the outlines in the image. [Noise Reduction] 0 Increasing the effect may cause a slight drop in picture [Dual Native ISO Setting]¢5 Sets the Dual Native ISO. (l 203) [Sensitivity]¢5 Sets the ISO sensitivity. (l 200) [White Balance]¢5 Sets the white balance. (l 204) 0 While [WB] is selected, press [ ] to display the white balance setting screen.
8. White Balance/Image Quality Registering Settings in My Photo Style 1 Press 21 to select the type of Photo Style. 2 Adjust the image quality. 0 My Photo Style displays the types of Photo Style at the top of image quality adjustment. Select the base Photo Style. 3 Press [DISP.]. 4 (When [MY PHOTO STYLE 1] to [MY PHOTO STYLE 10] is selected) Press 34 to select [Save Current Setting] and then press . or 5 Press 34 to select the registration destination number and then press or .
8. White Balance/Image Quality [Filter Settings] This mode records with additional image effects (filters). You can adjust the effect for each filter. In addition, you can simultaneously take pictures without effects. 1 Set the [Filter Effect]. 2 Select the filter. ≥ ¨[ ]¨[ ] ¨ [Filter Settings] ¨ [Filter Effect] ¨ [SET] ≥Press 34 to select, and then press or . ≥You can also select the image effect (filter) by touching the sample picture. 0 Press [DISP.
8.
8. White Balance/Image Quality Setting a Filter with Touch Operation 0 The default settings are for the Touch Tab to not be displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu. (l 425) 1 Touch [ ]. EXPS 2 Touch the item to set. [ ]: Filter on/off [ ]: Filter [ ]: Filter effect adjustment EXPS 0 White balance will be fixed to [AWB] and the flash will be fixed to [Œ] (Forced Flash Off). 0 The upper limit to ISO sensitivity is [6400].
8. White Balance/Image Quality 0 Filter on/off operations can be registered to a Fn button: [ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Filter Effect] (l 367) 0 When displaying the [Filter Effect] setting screen using the Fn button, pressing [DISP.] displays the filter selection screen. Setting the Type of Defocus ([Miniature Effect]) 1 Set [Filter Effect] to [Miniature Effect]. 2 Press 3 to display the setting screen. 0 The setting screen can also be displayed by touching [ ] then [ ].
8. White Balance/Image Quality Setting the Colour to Be Left ([One Point Color]) 1 Set [Filter Effect] to [One Point Color]. 2 Press 3 to display the setting screen. 0 The setting screen can also be displayed by touching [ ] then [ ]. 3 Press 3421 to move the frame and select the colour you want to leave. 0 Positions can be moved to the diagonal directions using the joystick. 0 You can also select the colour you want to leave by touching the screen.
8. White Balance/Image Quality [Simultaneous Record w/o Filter] You can simultaneously take pictures with no added filter effects. ¨[ ]¨[ ] ¨ [Filter Settings] ¨ Select [Simultaneous Record w/ o Filter] Settings: [ON]/[OFF] 0 [Simultaneous Record w/o Filter] is not available when using the following functions: – Burst recording – [6K/4K PHOTO]/[Post-Focus] – [Time Lapse Shot] – [Stop Motion Animation] – [RAWiFINE]/[RAWiSTD.
8. White Balance/Image Quality [High Resolution Mode] This merges pictures with a high resolution from multiple recorded images. This function is suitable for recording subjects that do not move. Merged pictures will be saved as RAW files with a maximum image size of 96 M. 0 Use a tripod to minimise camera shake. 0 The image stabilisation function is automatically turned off. 1 Set [High Resolution Mode]. 2 Start High Resolution mode.
8. White Balance/Image Quality 3 Decide on the composition and then fix the camera in place. 0 If blurring is detected, the High Resolution mode icon A blinks. 4 Start recording. ≥Press the shutter button fully. 0 With the default settings, [Shutter Delay] is activated, so there will be a gap in time from when the shutter button is pressed until the shutter is released. 0 The screen goes dark during recording. 0 The recording state indication (red) B blinks. Do not move the camera while it is blinking.
8. White Balance/Image Quality Setting Items ([High Resolution Mode]) [Start] Starts High Resolution mode. [Simul Record Normal Shot] Simultaneously takes pictures that are not merged when [ON] is set. The first picture will be saved with [Picture Size] set to [L]. [Shutter Delay] Sets the delay time from when the shutter button is pressed until the shutter is released. [Motion Blur Processing] Sets the correction method to use when the subject moved.
8. White Balance/Image Quality 0 In [High Resolution Mode], recording will be performed using the following settings: – [Shutter Type]: Fixed to [ELEC.] – Minimum aperture value: F16 – Shutter speed: 1 second to 1/8000 of a second – ISO sensitivity: Up to [3200] – When the focus mode is set to [AFC], it switches to [AFS].
8. White Balance/Image Quality [HLG Photo] Records an HLG format picture with a wide dynamic range. Bright lights that are easily overexposed, and dark areas that are easily underexposed can be recorded showing fine quality and rich colours just as seen with the human eyes. Recorded pictures can be output over HDMI to devices (TV, etc.) that support HLG format pictures for viewing. Additionally, devices that support the HSP format can directly play back images.
8. White Balance/Image Quality 0 The monitor and viewfinder on this camera do not support display of HLG format images. In the [Custom] ([Monitor / Display (Video)]) menu, you can display the images converted for monitoring on the monitor/viewfinder of this camera with [Monitor] in [HLG View Assist]. (l 314) 0 HLG images appear darker on devices that do not support the HLG format.
9. Flash Using an External Flash (Optional) If you attach the Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L: optional) to the hot shoe, you can record using the flash. You can also use a commercially available external flash by connecting a synchro cable to the flash synchro socket. Furthermore, by attaching an external flash that supports wireless flash recording, you can wirelessly control an external flash that is in a position separate from the camera. 0 Remove the lens hood to prevent vignetting.
9. Flash Connecting a Synchro Cable to the Flash Synchro Socket You can use a commercially available external flash by connecting a synchro cable to the flash synchro socket. 0 Use an external flash with a synchronisation voltage of 250 V or less. 0 Do not use the synchro cables with the length of 3 m (9.8 feet) or more. 1 Rotate the flash synchro socket cap in the direction of the arrow to remove. 0 Be careful not to lose the flash synchro socket cap.
9. Flash Notes on Flash Recording 0 Do not bring any object near the flash. Heat or light may cause the object to deform or discolour. 0 If you record repeatedly, time may be needed to charge the flash. While the flash is charging, images will be recorded without the flash firing. 0 When an external flash is attached, do not carry the camera by holding only the external flash. It may become detached.
9. Flash Setting Flash You can set the flash function to control flash firing from the camera. [Flash Mode] Sets the flash mode. ¨[ Mode] ] ¨ Select [Flash (Forced Flash On) [‰] [ ] [ ]¨[ ] [ (Slow Sync.) ] [Œ] The flash fires every time regardless of the recording conditions. (Forced On/Red- This is suitable for recording when there is backlighting or under lighting such as fluorescent lighting. Eye) (Slow Sync.
9. Flash 0 The flash fires twice. The interval between the first and second firings is longer when [ ] or [ ] is set. The subject should not move until the second firing has finished. 0[ ] and [ ] cannot be used when the following are set: – [Firing Mode]: [MANUAL] – [Flash Synchro]: [2ND] – [Wireless]: [ON] 0 Some flash modes may not be available depending on the settings on the external flash. 0 The effectiveness of red-eye reduction varies from person to person.
9. Flash Shutter Speeds for Flash Modes [Flash Mode] Shutter speed (sec.) [‰] [ [ [ 1/60¢1 to 1/320¢2 ] ] 1 to 1/250 ] ¢1 In [S] mode, this will be 60 seconds and in [M] mode it will be [B] (Bulb). ¢2 The maximum setting changes to 1/250 of a second in [P]/[A] modes. 0 The guide number decreases when the shutter speed is set to 1/320 of a second. [Red-Eye Removal] When [Flash Mode] is set to [ ] or [ ], the camera automatically detects red-eye and corrects image data.
9. Flash [Firing Mode]/[Manual Flash Adjust.] You can select whether to set the flash output automatically or manually. 0 Firing mode cannot be set when using a Flash (DMW-FL580L/DMW-FL360L/ DMW-FL200L: optional). It can be set only when using an external flash that does not use a battery (supplied with some models of Panasonic digital cameras). 1 2 234 Set the [Firing Mode]. ≥ ¨[ ]¨[ [Firing Mode] ]¨ [TTL] Sets flash output to be set automatically by the camera.
9. Flash 3 Press 21 to set the flash output and then press or . 0 It can be set within the range of [1/1] (full flash output) to [1/64] in 1/3 steps. [Flash Adjust.] You can adjust the flash output when taking pictures with the flash in TTL output mode. 1 Select [Flash Adjust.]. ≥ 2 ¨[ ]¨[ [Flash Adjust.] ]¨ Press 21 to adjust the flash output and then press or . 0 It can be adjusted within the range of [j3 EV] to [i3 EV] in 1/3 EV steps.
9. Flash 0 [ ] is displayed on the recording screen. 0 For information about adjusting the flash output when recording using a wireless flash, refer to page 240. 0 [Flash Adjust.] cannot be used when the following are set: – [Firing Mode]: [MANUAL] – [Wireless]: [ON] 0 You can register functions to Fn buttons: [ ]¨[ (l 367) ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Flash Adjust.
9. Flash [1ST] [2ND] This is the normal method for recording with the Flash. The light source appears behind the subject and the picture becomes dynamic. 0 When [2ND] is set, [2nd] is displayed on the flash icon of the recording screen. 0 When [Wireless] is set to [ON], this is fixed to [1ST]. 0 The effect may not be adequately achieved at faster shutter speeds. [Auto Exposure Comp.] Automatically adjust the flash output in conjunction with the exposure compensation value.
9. Flash Recording Using a Wireless Flash You can use a Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L: optional) to record using a wireless flash. You can separately control the firing of three flash groups and the flash attached to the hot shoe of the camera. Placing a Wireless Flash Place the wireless flash with its wireless sensor facing the camera.
9. Flash 1 2 Attach an external flash to the camera. (l 228) Set the wireless flashes to [RC] mode and then place them. 0 Set the channel and group for the wireless flashes. 3 Enable the wireless flash function of the camera. ≥ 4 ¨[ ¨ [ON] ]¨[ ] ¨ [Wireless] Set [Wireless Channel]. 0 Select the same channel as on the wireless flash side. 5 Set [Wireless Setup]. 0 Set the firing mode and flash output.
9. Flash Setting Items ([Wireless Setup]) 0 To fire a test flash, press [DISP.]. [External Flash]¢1 [A Group]/ [B Group]/ [C Group] [Firing Mode] [TTL]: The camera automatically sets the flash output. [AUTO]¢2: Sets the flash output on the external flash side. [MANUAL]: Sets the flash output of the external flash manually. [OFF]: The external flash outputs only communication light. [Flash Adjust.] Adjusts the flash output of the external flash manually when [Firing Mode] is set to [TTL].
9. Flash 0 You can register functions to Fn buttons: [ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Wireless Flash Setup] (l 367) [Wireless FP] The external flash performs FP firing (repeated high-speed firing of the flash) during wireless recording, enabling recording using the Flash even at fast shutter speeds. ¨[ ]¨[ ] ¨ Select [Wireless FP] Settings: [ON]/[OFF] [Communication Light] Set the strength of communication light.
10. Recording Videos Recording Videos It is possible to record video with a maximum resolution of 6K (5952k3968) on this camera. It also supports switching of the system frequency and 3 types of recording file format; AVCHD, MP4, and MOV. In the [ ] mode (Creative Video mode), which is specifically for video recording, you can use all of the video functions. 1 Start recording. ≥Press the video rec. button A. ≥You can also perform the same operation by pressing the sub video rec. button B.
10. Recording Videos Screen Displays While Video Recording The live view angle of view changes to the angle of view for video recording, and video recording time E and elapsed recording time F are displayed. 0 “h” is an abbreviation for hour, “m” for minute and “s” for second. 3s 24m59s 0 The recording state indication G and card access indication H turn red while videos are being recorded.
10. Recording Videos Size Interval for Dividing Files [Rec. File Format] [Rec Quality] [AVCHD] All A new file will be created to continue recording if the file size exceeds 4 GB. The files recorded can be played back continuously. [FHD] A new file will be created to continue recording if the continuous recording time exceeds 30 minutes or the file size exceeds 4 GB.
10. Recording Videos 0 When the remaining capacity of the battery or card gets low during video recording, the tally lamps blink at long intervals. When there is no remaining capacity in the battery or card, video recording is stopped and the tally lamps blink at short intervals. 0 If an operation such as a zoom or button operation is performed during video recording, that operation sound may be recorded. 0 The lens operation sound (AF and image stabiliser) may be recorded to video.
10. Recording Videos 0 You can switch the recording screen, status LCD display, and live view angle of view to suit video recording just as with the [ ] mode: [ ]¨[ ] ¨ [Video-Priority Display] (l 441) 0 You can change the tally lamp that turns on.
10. Recording Videos Creative Video Mode The [ ] mode (Creative Video mode) is a recording mode specifically for video recording in which you can use all video functions. In the [ ] mode, the recording screen and status LCD switch to displays suited to video recording. You can start and stop video recording with the shutter button. Change the exposure and audio settings with touch operation to prevent operation sounds from being recorded.
10. Recording Videos Status LCD You can switch the status LCD between 2 types of information display. 0 Use the Fn button registered with [Status-LCD Display(Video)] to operate. In default settings, this is registered in the [Fn1] button. For information about the Fn button, refer to page 367. 1 FPS 50 WB 4 AWB 6 7 MP4 FHD 2 3 SHUTTER 1/60 F3.5 ISO 13 14 100 5 8 FULL 9 AUTO 1 13 TC NDF IRIS 420/8-L 50.00p REC 10 15 00:00:00:00 INT.
10. Recording Videos 0 Even in the [iA]/[P]/[A]/[S]/[M] modes, as with the [ ] mode, you can switch to the display suited to video recording: [ ]¨[ ] ¨ [Video-Priority Display] (l 441) Recording with Creative Video 1 Set the mode dial to [ 2 Set the exposure mode. ≥ ]. ¨[ ]¨[ ] ¨ [Exposure Mode] ¨ [P]/[A]/[S]/[M] 0 You can perform the same exposure 3 operations as the [P]/[A]/[S]/[M] modes. Close the menu. ≥Press the shutter button halfway.
10. Recording Videos 4 Start recording. 5 Stop recording. ≥Press the shutter button A, video rec. button B, or sub video rec. button C. ≥Press the shutter button, video rec. button, or sub video rec. button again.
10. Recording Videos Operations During Video Recording Change the exposure and audio settings with touch operation to prevent operation sounds from being recorded. 0 With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu. (l 425) 1 Touch [ ]. 2 Touch an icon.
10. Recording Videos [CreativeVideo Combined Set.] In default settings, settings such as exposure and white balance changed in [ ] mode are also reflected in picture recording in [P]/[A]/[S]/[M] modes. From the [CreativeVideo Combined Set.] menu, you can separate settings for video recording and for picture recording. ¨[ ]¨[ ] ¨ Select [CreativeVideo Combined Set.] [F/SS/ISO/Exposure Comp.
10. Recording Videos Recording Video This section describes the settings used when video recording. 0 In “4. Image Recording”, the functions described work with both pictures and video. Please also refer to that section. – [Double Card Slot Function]: l 92 – [Folder / File Settings]: l 93 – [File Number Reset]: l 95 [System Frequency] This changes the system frequency of videos that are recorded and played back with the camera.
10. Recording Videos 0 After changing the setting, turn the camera off and on. 0 If you record using a system frequency that differs from the broadcasting system of your region, it may not be possible for you to properly play back videos on your TV. We recommend using the setting as it was at the time of purchase if you are unsure about broadcasting systems or if you will not be involved in producing cinema film.
10. Recording Videos [Rec. File Format] Sets the recording file format of videos to be recorded. ¨[ [AVCHD] ]¨[ ] ¨ Select [Rec. File Format] This file format is suitable for playback on high-definition TVs. [MP4] This file format is suitable for playback on PCs. [MOV] This file format is suitable for image editing. 0 You can register functions to Fn buttons: [ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Motion Pic.
10. Recording Videos [Rec. File Format]: [AVCHD] 0 YUV, Bit value, Image compression: 4:2:0, 8-bit, Long GOP 0 Audio format: Dolby AudioTM (2ch) A Recording frame rate B Bit rate C Video compression format (AVC: H.264/MPEG-4 AVC) [System Frequency]: [59.94Hz (NTSC)] [Rec Quality] [Image Area of Video] Resolution Aspect ratio A FULL S35 P/P B (Mbps) C [FHD/28M/60p]¢1 3 3 3 1920k1080 16:9 59.94p 28 AVC [FHD/17M/60i] 3 3 3 1920k1080 16:9 59.
10. Recording Videos [Rec. File Format]: [MP4] 0 YUV, Bit value, Image compression: – [10bit] recording quality: 4:2:0, 10-bit, Long GOP – [8bit] recording quality: 4:2:0, 8-bit, Long GOP 0 Audio format: AAC (2ch) A Recording frame rate B Bit rate C Video compression format (HEVC: H.265/HEVC, AVC: H.264/MPEG-4 AVC) [System Frequency]: [59.94Hz (NTSC)] [Rec Quality] [Image Area of Aspect Video] Resolution ratio FULL S35 P/P [4K/10bit/100M/60p] A B (Mbps) C HEVC 3 3 3840k2160 16:9 59.
10. Recording Videos [Rec. File Format]: [MOV] 0 YUV, Bit value, Image compression: – [422/10-I] recording quality: 4:2:2, 10-bit, ALL-Intra – [422/10-L] recording quality: 4:2:2, 10-bit, Long GOP – [420/10-L] recording quality: 4:2:0, 10-bit, Long GOP – [420/8-L] recording quality: 4:2:0, 8-bit, Long GOP 0 Audio format: LPCM (2ch) A Recording frame rate B Bit rate C Video compression format (HEVC: H.265/HEVC, AVC: H.264/MPEG-4 AVC) [System Frequency]: [59.
10. Recording Videos [System Frequency]: [59.94Hz (NTSC)] [Rec Quality] [Image Area of Aspect Video] Resolution ratio FULL S35 P/P A B (Mbps) C [C4K/30p/422/10-L] 3 3 3 4096k2160 17:9 29.97p 150 AVC [C4K/30p/420/8-L] 3 3 3 4096k2160 17:9 29.97p 100 AVC [C4K/24p/422/10-I] 3 3 3 4096k2160 17:9 23.98p 400 AVC [C4K/24p/422/10-L] 3 3 3 4096k2160 17:9 23.98p 150 AVC [C4K/24p/420/8-L] 3 3 3 4096k2160 17:9 23.
10. Recording Videos A Recording frame rate B Bit rate C Video compression format (HEVC: H.265/HEVC, AVC: H.264/MPEG-4 AVC) [System Frequency]: [50.00Hz (PAL)] [Rec Quality] [Image Area of Aspect Video] Resolution ratio FULL S35 P/P A B (Mbps) C [5.9K/25p/420/10-L] 3 5888k3312 16:9 25.00p 200 HEVC [5.4K/25p/420/10-L] 3 5376k3584 3:2 25.00p 200 HEVC [4K-A/50p/420/10-L] 3 3 3328k2496 4:3 50.00p 200 HEVC [4K-A/50p/420/8-L] 3 3 3328k2496 4:3 50.
10. Recording Videos [System Frequency]: [50.00Hz (PAL)] [Image Area of Aspect Video] Resolution ratio FULL S35 P/P [Rec Quality] A B (Mbps) C [FHD/100p/420/10-L] 3 3 1920k1080 16:9 100.00p 150 HEVC [FHD/50p/422/10-I] 3 3 3 1920k1080 16:9 50.00p 200 AVC [FHD/50p/422/10-L] 3 3 3 1920k1080 16:9 50.00p 100 AVC [FHD/50p/420/8-L] 3 3 3 1920k1080 16:9 50.00p 100 AVC [FHD/50i/422/10-I] 3 3 3 1920k1080 16:9 50.
10. Recording Videos [System Frequency]: [24.00Hz (CINEMA)] [Rec Quality] [Image Area of Aspect Video] Resolution ratio FULL S35 P/P [C4K/48p/420/10-L] A B (Mbps) C 3 3 4096k2160 17:9 48.00p 200 HEVC [C4K/24p/422/10-I] 3 3 3 4096k2160 17:9 24.00p 400 AVC [C4K/24p/422/10-L] 3 3 3 4096k2160 17:9 24.00p 150 AVC [C4K/24p/420/8-L] 3 3 3 4096k2160 17:9 24.00p 100 AVC 3 3 3840k2160 16:9 48.
10. Recording Videos 0 Since the camera employs the VBR recording format, the bit rate is changed automatically depending on the subject to record. As a result, video recording time is shortened when a fast-moving subject is recorded. 0 Videos in ALL-Intra and 4:2:2 10-bit formats are intended for editing on a PC used for video production. 0 When using Super 35 mm/APS-C lenses, 6K, 5.9K, and 5.4K [Rec Quality] cannot be set.
10. Recording Videos [Filtering] When the [Rec. File Format] is set to [MOV], you can specify items such as frame rate, resolution, and codec (YUV, Bit value, Image compression), and just display recording quality that meets those conditions. 1 In the [Rec Quality] setting screen, press [DISP.]. 2 Press 34 to select a setting item and then press or . 0 Settings: [Frame Rate]/[Resolution]/ [Codec]/[Variable Frame Rate]/[Hybrid Log Gamma] 3 Press 34 to select the filtering conditions and then press .
10. Recording Videos [add to list] Select a recording quality and register it in My List. The recording quality you register can be set in [Rec Quality (My List)]. In the [Rec Quality] setting screen, press [Q]. 0 The following settings are also registered at the same time: – [System Frequency] – [Rec. File Format] – [Image Area of Video] Setting or deleting in My List 1 Select [Rec Quality (My List)]. 0 ¨[ ]¨[ ] ¨ [Rec Quality (My List)] 2 Press 34 to select a setting item and then press or .
10. Recording Videos [Image Area of Video] Set the image area during video recording. The angle of view differs depending on the image area. Narrowing the image area allows you to achieve a telescopic effect without image deterioration. ¨[ ]¨[ ] ¨ Select [Image Area of Video] Item Settings details [FULL] Recording is within the area suited to the image circle of a full-frame lens. [S35mm] Recording is within the area suited to the image circle of a Super 35 mm lens.
10. Recording Videos Image area (Ex.: FHD video) FULL S35mm PIXEL/PIXEL 0 To check the image area in recording modes other than [ ] mode, set [VideoPriority Display] in the [Custom] ([Monitor / Display (Video)]) menu to [ON].
10. Recording Videos Time Code When [Rec. File Format] is set to [AVCHD] or [MOV], the time code is automatically recorded during video recording. If [MP4], the time code is not recorded. Setting the Time Code Sets the recording, display, and output of the time code. 1 Set [Rec. File Format] to [AVCHD] or [MOV]. ≥ 2 ¨[ ]¨[ ] ¨ [Rec. File Format] ¨ [AVCHD]/[MOV] Select [Time Code].
10. Recording Videos [Time Code Value] [Time Code Mode] [Reset] Sets to 00:00:00:00 (hour: minute: second: frame) [Manual Input] Manually input hour, minute, second and frame. [Current Time] Sets hour, minute and second to current time and sets frame to 00. [DF] Drop Frame. The camera modifies the difference between recorded time and time code. 0 Seconds and frames are separated by “.”. (Example: 00:00:00.00) [NDF] Non-Drop Frame. Records the time code without drop frame.
10. Recording Videos Synchronising the Time Code with an External Device Synchronise the time code default value with an external device that supports time code signal input and output. A B C D Flash synchro socket BNC conversion cable (for TC IN/OUT) (supplied) BNC cable (commercially available) External devices Preparations for Time Code Synchronisation When [Count Up] is set to [FREE RUN] in the [ ] mode, you can synchronise the initial value of the time code with an external device.
10. Recording Videos 4 Insert the BNC conversion cable (for TC IN/OUT), and then rotate the locking screw in the direction of the arrow to attach the cable. 5 Connect the BNC conversion cable (for TC IN/OUT) and the external device with the BNC cable. 0 Do not use any other BNC conversion cables (for TC IN/OUT) except the supplied one. 0 Do not use the BNC cables with the length of 2.8 m (9.2 feet) or more. 0 We recommend using a 5C-FB equivalent double-shielded BNC cables.
10. Recording Videos 3 Set [TC Synchronization] to [TC OUT]. ¨[ ]¨[ ] ¨ [Time Code] ¨ [External TC Setting] ¨ [TC Synchronization] ¨ [TC OUT] ≥The time code signal is output according to the recording frame rate of the [Rec Quality] and the [Time Code Mode] ([DF]/[NDF]) setting. ≥ 4 Operate the external device to synchronise the time code.
10. Recording Videos Synchronise the Time Code of the Camera with That of the External Device (TC IN) The initial time code value of the camera is synchronised according to the time code signal (LTC signal) of the external device. 0 In advance, change the [System Frequency] (l 253), [Rec Quality] (l 255), and [Time Code Mode] (l 269) to match the external device. 1 2 Prepare for time code synchronising. (l 270) Set [TC Synchronization] to [TC IN].
10. Recording Videos Maintaining, Releasing, and Restoring the Slave State Even if you disconnect the BNC cable, the camera will remain in slave state. 0 Perform one of the following operations to release the camera from the slave state. – – – – – Operate the camera on/off switch Switch the recording mode Change the [System Frequency] Set the [Variable Frame Rate] Switch the [Rec Quality] between 47.95p/23.
10. Recording Videos Using AF (Video) This section describes the use of AF when video recording. 0 In “5. Focus/Zoom”, the functions described work with both pictures and video. – – – – – Selecting the Focus Mode: l 96 Selecting the AF Mode: l 103 AF Area Movement Operation: l 118 Record Using MF: l 123 Recording with Zoom: l 127 [Continuous AF] You can select how to set the focus in AF when recording videos.
10. Recording Videos 0 In the [iA] mode, the camera automatically keeps focusing during recording standby, irrespective of the [Continuous AF] setting. 0 Depending on the recording conditions or lens used, the AF operation sound may be recorded during video recording. If the operation sound bothers you, we recommend recording with [Continuous AF] set to [OFF]. 0 If the zoom is operated while recording videos, the subject may take a while to come into focus.
10. Recording Videos [AF Custom Setting(Video)] You can fine-adjust the focusing method for video recording using [Continuous AF]. ¨[ ]¨[ ] ¨ Select [AF Custom Setting(Video)] [ON] Enables the following settings. [OFF] Disables the following settings. [AF Speed] [SET] [AF Sensitivity] [r] side: Focus moves at a faster speed. [s] side: Focus moves at a slower speed. [r] side: When the distance to the subject changes significantly, the camera immediately readjusts the focus.
10. Recording Videos Video Brightness and Colouring This section describes the brightness and colouring settings used during video recording. 0 In “7. Metering/Exposure/ISO Sensitivity” and “8. White Balance/Image Quality”, the functions described work with both pictures and video. Please also refer to those sections.
10. Recording Videos [Master Pedestal Level] You can adjust the black level, which serves as the reference for images. 1 Set the mode dial to [ 2 Select [Master Pedestal Level]. ≥ 3 ]. ¨[ ]¨[ ]¨ [Master Pedestal Level] Adjust master pedestal. ≥Rotate , or . +4 MPL -15 -10 -5 0 5 10 15 0 Set in the range between j15 and i15.
10. Recording Videos Recording While Controlling Overexposure (Knee) When [Photo Style] is set to [Like709], you can adjust the knee so that recording can be performed with minimal overexposure. 1 Set [Photo Style] to [Like709]. ≥ ¨[ ]¨[ Style] ¨ [Like709] /LNH ] ¨ [Photo ±0 ±0 2 280 Press [Q].
10. Recording Videos 3 Select a knee setting. $872 ≥Press 21 to select a setting item. Adjusts the compression levels of high-luminance areas automatically. [AUTO] Allows you to adjust the master knee point and master knee slope manually. [MANUAL] Press 34 to select an item and then press 21 to adjust. [POINT]: Master knee point [SLOPE]: Master knee slope 0 Rotate to adjust the knee master point, and to adjust the knee master slope.
10. Recording Videos [ISO Sensitivity (video)] Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO]. 1 Set the mode dial to [ 2 Set [ISO Sensitivity (video)]. ≥ ]. ¨[ ]¨[ ]¨ [ISO Sensitivity (video)] Setting Items ([ISO Sensitivity (video)]) [ISO Auto Lower Limit Setting] Sets the lower limit for ISO sensitivity when ISO sensitivity is [AUTO]. 0 Set in the range between [100] and [25600].
10. Recording Videos Audio Settings [Sound Rec Level Disp.] The sound recording level is displayed on the recording screen. ¨[ ]¨[ ] ¨ Select [Sound Rec Level Disp.] Settings: [ON]/[OFF] 0 When [Sound Rec Level Limiter] is set to [OFF], [Sound Rec Level Disp.] is fixed to [ON]. 0 You can register functions to Fn buttons: [ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Sound Rec Level Disp.] (l 367) [Mute Sound Input] This mutes audio input.
10. Recording Videos [Sound Rec Gain Level] This switches the gain of audio input. ¨[ ]¨[ [STANDARD] ] ¨ Select [Sound Rec Gain Level] This is the standard input gain setting. (0 dB) Audio input is reduced for recording in environments with loud noises. (j12 dB) [LOW] 0 [Sound Rec Gain Level] is not available when [Mic Socket] is set to [ ] and an external audio device is connected. [Sound Rec Level Adj.] Manually adjust the sound recording level. 1 Select [Sound Rec Level Adj.].
10. Recording Videos [Sound Rec Level Limiter] The sound recording level is adjusted automatically to minimise sound distortion (crackling noise). ¨[ ]¨[ ] ¨ Select [Sound Rec Level Limiter] Settings: [ON]/[OFF] 0 You can register functions to Fn buttons: [ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Sound Rec Level Limiter] (l 367) [Wind Noise Canceller] This reduces the wind noise coming into the built-in microphone while maintaining sound quality.
10. Recording Videos Main Assist Functions This section describes the main assist functions that are convenient when recording. 0 The [Custom] ([Monitor / Display (Video)]) menu has display assist functions such as the centre marker. For details, refer to page 439. [SS/Gain Operation] You can switch the units of shutter speed values and gain (sensitivity) values. ¨[ ]¨[ ] ¨ Select [SS/Gain Operation] [SEC/ISO] Displays the shutter speed in seconds and the gain in ISO.
10.
10. Recording Videos [WFM/Vector Scope] This displays the waveform monitor or the vector scope on the recording screen. You can change the size of the waveform display. 1 Set the mode dial to [ 2 Set [WFM/Vector Scope]. ≥ ¨[ ]¨[ ]¨ [WFM/Vector Scope] [WAVE] [VECTOR] [OFF] 288 ]. Displays a waveform. Displays the vector scope.
10. Recording Videos 3 Select the position to display. ≥Press 3421 to select and then press or . 0 Positions can be moved to the diagonal directions using the joystick. 0 You can also move using touch operations. 0 You can rotate to change the size of the waveform. 0 To return the waveform or vector scope position back to the centre, press [DISP.]. With waveform, pressing [DISP.] once again returns the size to the default setting.
10. Recording Videos Screen Displays Waveform A B C D E F G H The range between 0 and 100 shows dotted lines at intervals of 10.
10. Recording Videos Vector scope I J K L M N O R (Red) YL (Yellow) G (Green) MG (Magenta) B (Blue) CY (Cyan) Display example 0 You can also change the position by dragging on the recording screen. 0 The waveform and vector scope are not output through HDMI. 0 When [WFM/Vector Scope] is set, [Histogram] does not work.
10. Recording Videos [Luminance Spot Meter] Specify any spot on the subject to measure the luminance over a small area. 1 Set [Luminance Spot Meter]. ≥ 2 ¨[ ]¨[ ] ¨ [Luminance Spot Meter] ¨ [ON] Select the position where you want to measure the luminance. ≥Press 3421 to select and then press or . 65% A Luminance value 0 Positions can be moved to the diagonal directions using the joystick. 0 You can also change the position by dragging the frame on the recording screen.
10. Recording Videos [Zebra Pattern] Parts that are brighter than the benchmark value are displayed with stripes. You can also set the benchmark value and the breadth of the range so that the stripes are displayed on parts that are within the range of brightness you specify. [ZEBRA1] ¨[ [ZEBRA2] ]¨[ [ZEBRA1+2] ] ¨ Select [Zebra Pattern] [ZEBRA1] Parts that are brighter than the benchmark value are displayed with [ZEBRA1] stripes.
10. Recording Videos When [BASE/RANGE] Was Selected with [SET] Centred on the brightness set with [Base Level], parts with the brightness in the range set in [Range] are displayed with the stripes. ≥[Base Level] can be set in the range between 0% and 109% (IRE). ≥[Range] can be set in the range between n1% and n10% (IRE). 0 When [Photo Style] is set to [V-Log], these are set at Stop units. (Calculated as 0 Stop=42% (IRE)) 0 [ZEBRA1+2] cannot be selected while you are setting [BASE/RANGE].
10. Recording Videos [Video Frame Marker] A frame with the set aspect ratio is displayed on the recording screen. This allows you to see during recording the angle of view that will be achieved with trimming (cropping) in post-processing. ¨[ ]¨[ ] ¨ Select [Video Frame Marker] [ON] Displays video grid lines on the recording screen. [OFF] [Frame Aspect] [SET] — Sets the aspect ratio of video grid lines. [2.39:1]/[2.35:1]/[2.00:1]/[1.
10. Recording Videos Colour bars/Test Tone The colour bars are displayed on the recording screen. A test tone is output while the colour bars are being displayed. [SMPTE] [EBU] [ARIB] ¨[ ]¨[ ] ¨ Select [Color Bars] Settings: [SMPTE]/[EBU]/[ARIB] . 0 To end the display, press Adjusting the Test Tone There are 4 levels ([j12dB], [j18dB], [j20dB], and [MUTE]) of test tone to select. Rotate , or to select the test tone level.
11. Special Video Recording Variable Frame Rate By recording using a frame rate that is different to the playback frame rate, you can record smooth slow motion video and fast motion video. Slow Motion Video (Overcrank Recording) Set a number of frames that is higher than the recording frame rate of the [Rec Quality]. For example: When recording at 48 fps when set to a 24.00p [Rec Quality], the speed is halved.
11. Special Video Recording 3 Select a recording quality with which you can use [Variable Frame Rate] recording. ≥ ¨[ Quality] ]¨[ ] ¨ [Rec 0 Items with which you can use [Variable Frame Rate] are indicated as [VFR available]. 0 Recording qualities with which you can use [Variable Frame Rate] recording: 4 l 323 Select an [Image Area of Video] with which you can use [Variable Frame Rate].
11. Special Video Recording Available Frame Rate Setting Ranges The frame rate you can set differs depending on the [Rec. File Format] and [Rec Quality] settings. [Rec. File Format] [Rec Quality] Frame rate [AVCHD] FHD video 2 fps to 60 fps Anamorphic (4:3) video 2 fps to 50 fps¢1 [MOV] C4K video/4K video 2 fps to 60 fps FHD video 2 fps to 180 fps¢2 ¢1 When set to a 23.98p or 24.00p [Rec Quality], a frame rate exceeding 48 fps cannot be set.
11. Special Video Recording High Frame Rate Video [MOV] video with high frame rates can be recorded to cards. By converting it with the compatible software, it is possible to produce slow motion video. AF recording and audio recording, not possible with [Variable Frame Rate], also become possible. Recording Qualities for High Frame Rate Video [Rec. File Format] [59.
11. Special Video Recording [Focus Transition] Smoothly transitions the focus position from the current position to a position registered in advance. 1 Set the mode dial to [ 2 Select [Focus Transition]. 3 Set the recording settings. ≥ ¨[ ]¨[ Transition] [Start] [Focus Pull Setting] [Focus Transition Speed] ]. ] ¨ [Focus Start recording. Registers the focus position. 0 The setting screen for the focus position is displayed when you select either [1], [2], or [3].
11. Special Video Recording 4 Close the menu. ≥Selects [Start], and press or . ≥The recording screen is displayed. 0 To return to the setting screen, press 5 [DISP.]. Start recording. ≥Press the video rec. button. 0 If you have enabled [Focus Transition Rec], Focus Transition will start when you start recording a video. 6 Start Focus Transition. ≥Press 21 to select [1], [2], or [3], and then press or .
11. Special Video Recording 0 Maintain the same distance to the subject after setting the focus position. 0 The moving speed of focus varies depending on the lens being used. 0 While using [Focus Transition], it is not possible to focus on anything other than the registered focus position. 0 Any of the operations below will clear the focus position settings.
11. Special Video Recording [Live Cropping] By cropping a part of the image from the image displayed in the live view, it is possible to record FHD video that incorporates panning and zooming with the camera staying in a fixed position. Pan Zoom in 0 Use a tripod to minimise camera shake. 1 2 Set the mode dial to [ Set [Rec. File Format] to [MP4] or [MOV]. ≥ 304 ]. ¨[ ]¨[ ] ¨ [Rec.
11. Special Video Recording 3 Select a recording quality with which you can record [Live Cropping] video. ≥ ¨[ Quality] ]¨[ ] ¨ [Rec 0 A recording quality with which you can 4 record [Live Cropping] video: l 323 Set the time for panning or zooming.
11. Special Video Recording 7 Start Live Cropping recording. C Elapsed recording time D Set operating time ≥Press the video rec. button. 0 When the set operating time has elapsed, recording automatically ends. To end recording midway, press the video rec. button again.
11. Special Video Recording Operations for Setting the Cropping Frame Button operation Touch operation 3421 Touch / Pinch out/ pinch in Description of operation Moves the frame. 0 Positions can be moved to the diagonal directions using the joystick. s [DISP.] [Reset] [Set] Enlarges/reduces the frame in small steps. Enlarges/reduces the frame. Start frame: Returns the frame position and size to the default settings. End frame: Cancels the settings for the position and size of the frame.
11. Special Video Recording Log Recording Setting [Photo Style] to [V-Log] enables Log recording. Images finished with rich gradation can be created through post production processing. ¨[ ]¨[ ] ¨ [Photo Style] ¨ Select [V-Log] 0 Post-production processing is enabled by utilising LUT (Look-Up Table). You can download LUT data from the following support site: https://panasonic.jp/support/global/cs/dsc/download/index3.
11. Special Video Recording Exposure When [V-Log] Is Set The [V-Log] curve characteristics comply with “V-Log/V-Gamut REFERENCE MANUAL Rev.1.0”. When set to [V-Log], the standard exposure when grey with a reflectance ratio of 18% is imaged is IRE 42%.
11. Special Video Recording [V-Log View Assist] When [Photo Style] is set to [V-Log], the recording screen and images output via HDMI will darken. Using [V-Log View Assist] means you can show images with LUT data applied on the monitor/viewfinder and output them via HDMI. ¨[ ]¨[ ] ¨ Select [V-Log View Assist] [Read LUT File] [LUT Select] Reads LUT data from the card. Selects the LUT data to be applied from among the preset ([Vlog_709]) and registered LUT data.
11. Special Video Recording Reading LUT Files 0 The following LUT data can be used: – The “.vlt” format, which meets the requirements specified in the “VARICAM 3DLUT REFERENCE MANUAL Rev.1.0” – File names consisting of up to 8 alphanumeric characters (excluding extension) 0 Save the LUT data with a file extension of “.vlt” in the root directory of the card (the folder opened when the card is opened on a PC). 1 Insert a card on which LUT data is saved into the camera. 2 Select [Read LUT File].
11. Special Video Recording HLG Videos Record videos with the wide dynamic range of the HLG format. You can record in very bright light where overexposure can occur or in dark areas where underexposure can occur, maintaining the rich yet subtle colours you can see with your naked eye. You can view the video that you record by outputting via HDMI to devices (TVs, etc.) that support the HLG format, or playing back directly on supporting devices.
11. Special Video Recording 3 Select a recording quality with which you can record HLG video. ≥ ¨[ Quality] ]¨[ ] ¨ [Rec 0 Items available for recording with HLG video are indicated as [HLG available]. 4 0 Recording qualities with which you can record HLG video: l 323 Set [Photo Style] to [Like2100(HLG)]. ≥ /LNH +/* ¨[ ]¨[ ] ¨ [Photo Style] ¨ [Like2100(HLG)] ±0 ±0 0 When the [Rec.
11. Special Video Recording ISO Sensitivity When [Like2100(HLG)] Is Set The lower limit of available ISO sensitivities will become [400]. 0 The range of available ISO sensitivities is also different for [LOW] and [HIGH] in [Dual Native ISO Setting]. 0 Reset the exposure if necessary when ISO sensitivity changes.
11. Special Video Recording Anamorphic Recording This camera can record video with a resolution of 4K-A (anamorphic (4:3) video) that is compatible with anamorphic recording with an aspect ratio of 4:3. It can also record video with an aspect ratio of 3:2 that has 6K resolution or 5.4K resolution. You can select a recording quality that suits anamorphic recording from a variety of different video formats (recording qualities). 6K (3:2)/Full 5.9K (16:9)/Full 5.
11. Special Video Recording 0 When [Rec. File Format] is set to [MOV], by filtering [Rec Quality] by the number of pixels, you can display just those recording qualities with resolutions and aspect ratios that meet the conditions. For details, refer to page 264. 0 Anamorphic (4:3) video is displayed as [ANAMOR] in the [Rec Quality] setting screen. 0 This camera is not compatible with de-squeeze editing of video recorded with anamorphic recording. Use compatible software.
11. Special Video Recording 2 Set [Anamorphic Desqueeze Display]. ≥ ¨[ ]¨[ ]¨ [Anamorphic Desqueeze Display] Settings: [ [ [ [ [ ]([2.0k])/ ]([1.8k])/ ]([1.5k])/ ]([1.33k])/ ]([1.30k])/[OFF] 0 Make settings to suit the magnification of the anamorphic lens you are using. 3 Set [Video Frame Marker]. ≥ ¨[ ]¨[ Frame Marker] ] ¨ [Video 0 For details, refer to page 295. 0 Images output via HDMI are not de-squeezed.
11. Special Video Recording [Synchro Scan] Fine-adjust the shutter speed to reduce flickering and horizontal stripes. The shutter speed set in Synchro Scan is saved separately from the shutter speed used for normal recording. In the Synchro Scan setting screen you can call up the current shutter speed for normal recording and adjust it. 1 2 Set the mode dial to [ Set the exposure mode to [S] or [M]. ≥ 3 318 ]. ¨[ ]¨[ ]¨ [Exposure Mode] ¨ [S]/[M] Set [Synchro Scan].
11. Special Video Recording 4 Set the shutter speed. ≥Rotate , or to select a numeric value, then press or . 0 You can call up the current shutter speed for normal recording by pressing [DISP.]. 60.1 ュリヴヱハ &XUUHQW VKXWWHU VSHHG 0 Adjust the shutter speed while looking at the screen so that flickering and horizontal stripes will be minimised. 0 When you set [Synchro Scan] to [ON], the available shutter speed range becomes narrower.
11. Special Video Recording [Loop Recording (video)] Even when recording uses up the card’s free space, the camera continues the recording by deleting the oldest segment of the recorded data. 1 2 Set the mode dial to [ Set [Rec. File Format] to [MOV]. ≥ 3 ]. ¨[ ]¨[ Format] ¨ [MOV] ] ¨ [Rec. File Set [Loop Recording (video)]. ≥ ¨[ ]¨[ ] ¨ [Loop Recording (video)] ¨ [ON] 0[ ] is displayed on the recording screen.
11. Special Video Recording 0 Make sure the camera does not turn off during recording. 0 Loop recording cannot start if there is insufficient available capacity on the card. 0 When the recording time exceeds 12 hours, recording continues with data being deleted in order from the point where recording started.
11. Special Video Recording [Segmented File Recording] To avoid video loss due to unforeseen interruptions to the power supply, recorded video is divided every minute while MOV video is being recorded. 0 The divided videos are saved as one group image. 1 Set [Rec. File Format] to [MOV]. ≥ 2 ¨[ ]¨[ Format] ¨ [MOV] ] ¨ [Rec. File Set [Segmented File Recording].
11. Special Video Recording List of Recording Qualities That Enable Special Videos to be Recorded VFR : Recording qualities that enable use of [Variable Frame Rate] HFR : Recording qualities for High Frame Rate video Live Crop : HLG Recording qualities that enable use of [Live Cropping] : Recording qualities with which you can record HLG video : Recording qualities for anamorphic recording with an aspect ratio of 4:3 [Rec.
11. Special Video Recording [Rec. File Format]: [MP4] [System Frequency] [Rec Quality] VFR HFR Live Crop [4K/10bit/100M/60p] HLG 3 [4K/8bit/100M/30p] [4K/10bit/72M/30p] [59.94Hz (NTSC)] 3 [4K/8bit/100M/24p] [4K/10bit/72M/24p] [FHD/8bit/28M/60p] 3 3 [FHD/8bit/24M/24p] [FHD/8bit/20M/30p] 3 [4K/10bit/100M/50p] 3 [4K/8bit/100M/25p] [50.
11. Special Video Recording [Rec. File Format]: [MOV] [System Frequency] [Rec Quality] VFR HFR HLG [6K/24p/420/10-L] 3 [5.9K/30p/420/10-L] 3 [5.9K/24p/420/10-L] 3 [5.4K/30p/420/10-L] 3 [4K-A/48p/420/10-L] 3 [4K-A/30p/422/10-I] [4K-A/30p/422/10-L] [4K-A/30p/420/8-L] [59.
11. Special Video Recording [System Frequency] [Rec Quality] VFR HFR Live Crop [4K/60p/420/10-L] HLG 3 [4K/60p/420/8-L] [4K/48p/420/10-L] 3 3 [4K/30p/422/10-I] 3 [4K/30p/422/10-L] [4K/30p/420/8-L] 3 3 [4K/24p/422/10-I] 3 [4K/24p/422/10-L] 3 [4K/24p/420/8-L] 3 [FHD/120p/420/10-L] [59.
11. Special Video Recording [System Frequency] [Rec Quality] VFR HFR Live Crop [5.9K/25p/420/10-L] HLG 3 [5.4K/25p/420/10-L] 3 [4K-A/50p/420/10-L] 3 [4K-A/50p/420/8-L] 3 3 [4K-A/25p/422/10-I] 3 3 [4K-A/25p/422/10-L] 3 3 [4K-A/25p/420/8-L] 3 3 [C4K/50p/420/10-L] 3 [C4K/50p/420/8-L] [C4K/25p/422/10-I] 3 [C4K/25p/422/10-L] 3 [C4K/25p/420/8-L] [50.
11. Special Video Recording [System Frequency] [Rec Quality] VFR HFR Live Crop [6K/24p/420/10-L] 3 [5.
12. Connections with External Devices (Video) HDMI Devices (HDMI Output) You can record while outputting the camera images to an external monitor or external recorder connected with an HDMI cable. 0 HDMI output control differs between during recording and during playback. Refer to page 451 for HDMI output settings during playback. Getting started: 0 Turn off the camera and the external monitor/external recorder.
12. Connections with External Devices (Video) 0 Use a “High Speed HDMI cable” with the HDMI logo. Cables that do not comply with the HDMI standards will not work. “High Speed HDMI cable” (Type A–Type A plug, up to 1.5 m (4.9 feet) long) Attaching the Cable Holder Use of the supplied cable holder prevents detachment of the cable and damage to the terminals. 0 Put the camera on a stable surface to perform this task. 1 While pushing A, slide the clamp portion B of the cable holder to remove it.
12. Connections with External Devices (Video) 4 Fit the USB connection cable (C–C or A–C) E and HDMI cable F to the clamp. 5 Slide the clamp portion G to attach it to the cable holder. 6 Connect the USB connection cable (C– C or A–C) to the USB port H. 7 Connect the HDMI cable to the [HDMI] socket I. J Leave some slack so that this section has a length of at least 10 cm (0.33 feet). Removing the cable holder To remove the cable holder, follow the steps for attaching it in the reverse order.
12. Connections with External Devices (Video) Adjusting the Monitor Angle You can adjust the angle of the monitor while it is tilted (l 55) by rotating it, without interfering with the connection cables. 0 Do not use any other USB connection cables except the supplied USB connection cables (C–C and A–C). 0 We recommend using an HDMI cable with a thickness diameter of 6.5 mm (0.26 inch) or less. 0 It may not be possible to attach HDMI cables of certain shapes.
12. Connections with External Devices (Video) Images Output via HDMI The images output via HDMI differ depending on the recording mode. [ ] Mode Aspect ratio, resolution, and frame rate output is according to the [Rec Quality] settings in the [Video] ([Image Format]) menu. Resolution and frame rate can be down-converted for output according to the application. YUV 4:2:2 is used for YUV and bit value output, as shown on the right.
12. Connections with External Devices (Video) [iA]/[P]/[A]/[S]/[M] Mode Output is the same as [ ] mode during video recording or when [VideoPriority Display] is set to [ON]. Output is with a 16:9 aspect ratio during recording standby. Resolution, frame rate, YUV, and bit value output matches the connected device. 0 When set to any [Aspect Ratio] other than 16:9, bands are added to the images and they are output with a 16:9 aspect ratio.
12. Connections with External Devices (Video) HDMI Output Image Quality (Resolution/ Frame Rate) Settings for Down-Converting Make settings for the down-conversion of resolution and frame rate for HDMI output in the [ ] mode. ¨[ [AUTO] [4K/30p] ([4K/25p]) ]¨[ ] ¨ [HDMI Rec Output] ¨ Select [Down Convert] Outputs by down-converting to match the connected device. Outputs by down-converting resolution to 4K and frame rate to either 29.97p or 25.00p.
12. Connections with External Devices (Video) [System Frequency]: [59.94Hz (NTSC)] Resolution and recording frame rate of the [Rec Quality] [Down Convert] 6K/23.98p 5.9K/23.98p 4K-A/47.95p 4K-A/23.98p 4K/47.95p 4K/23.98p 5.9K/29.97p 5.4K/29.97p 4K-A/29.97p 4K/29.97p C4K/59.94p C4K/47.95p C4K/23.98p [4K/30p] — 4K/29.97p 4K/29.97p — [1080p] 1080/23.98p 1080/29.97p¢1 1080/59.94p 1080/23.98p [1080i] — 1080/59.94i 1080/59.94i — [OFF] 4K/23.98p 4K/29.97p C4K/59.94p C4K/23.
12. Connections with External Devices (Video) [System Frequency]: [50.00Hz (PAL)] Resolution and recording frame rate of the [Rec Quality] [Down Convert] 5.9K/25.00p 5.4K/25.00p 4K-A/25.00p 4K/25.00p 4K-A/50.00p 4K/50.00p C4K/50.00p C4K/25.00p [4K/25p] 4K/25.00p 4K/25.00p 4K/25.00p 4K/25.00p [1080p] 1080/25.00p¢2 1080/50.00p 1080/50.00p 1080/25.00p¢2 [1080i] 1080/50.00i 1080/50.00i 1080/50.00i 1080/50.00i [OFF] 4K/25.00p 4K/50.00p C4K/50.00p C4K/25.
12. Connections with External Devices (Video) HDMI Output Settings Outputting the Camera Information Display via HDMI Output the camera information display to an external device connected by HDMI. ¨[ ]¨[ ] ¨ [HDMI Rec Output] ¨ Select [Info Display] Settings: [ON]/[OFF] Outputting Control Information to an External Recorder Recording start and stop control information is output to an external recorder connected by HDMI.
12. Connections with External Devices (Video) Outputting Down-converted Audio to an HDMI Device When an XLR Microphone Adaptor (DMW-XLR1: optional) is attached, audio is down-converted to a format suitable for the connected HDMI external device before being output. ¨[ Convert] [AUTO] [OFF] ]¨[ ] ¨ [HDMI Rec Output] ¨ Select [Sound Down Output is down-converted to match the connected device. Output is according to the settings in [XLR Mic Adaptor Setting].
12. Connections with External Devices (Video) External Microphones (Optional) With a Stereo Shotgun Microphone (DMW-MS2: optional) or Stereo Microphone (VW-VMS10: optional), you can record higher-quality audio compared to the built-in microphone. 1 Set the [Mic Socket] that suits the device to be connected. ≥ ¨[ ]¨[ ] ¨ [Mic Socket] [Mic Input (Plugin Power)] When connecting an external microphone that requires a power supply from the camera [MIC] socket.
12. Connections with External Devices (Video) 3 Connect the camera and external microphone. 0 If mounting the external microphone on the camera hot shoe A, remove the hot shoe cover. (l 228) 0 Do not use the stereo microphone cables with the length of 3 m (9.8 feet) or more. Setting the Sound Pickup Range (DMW-MS2: Optional) When using the Stereo Shotgun Microphone (DMW-MS2: optional), you can set the microphone sound pickup range. 1 Select [Special Mic.].
12. Connections with External Devices (Video) 0 You can register the [MANUAL] sound pickup range setting in an Fn button: [ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Mic. Directivity Adjust] (l 367) Reduction of Wind Noise This reduces wind noise when an external microphone is connected. ¨[ ]¨[ ] ¨ Select [Wind Cut] Settings: [HIGH]/[STANDARD]/[LOW]/[OFF] 0 While the external microphone is connected, [ 0 0 0 0 0 0 0 342 ] is displayed on the screen.
12. Connections with External Devices (Video) XLR Microphone Adaptor (Optional) By attaching an XLR Microphone Adaptor (DMW-XLR1: optional) to the camera, you can use a commercially available XLR microphone to enable the recording of superior-quality high-res/stereo audio. A Hot shoe B Commercially available XLR microphone Getting started: 0 Turn off the camera, and remove the hot shoe cover. (l 228) 1 2 3 Attach the XLR Microphone Adaptor to the hot shoe. Set the camera on/off switch to [ON].
12. Connections with External Devices (Video) 0 While an XLR Microphone Adaptor is attached, [ 0 0 0 0 0 0 0 344 ] is displayed on the screen. When [XLR Mic Adaptor Setting] is set to other than [OFF], the following settings are fixed: – [Sound Rec Level Limiter]: [OFF] – [Wind Noise Canceller]: [OFF] – [Sound Output]: [REC SOUND] [Sound Rec Level Adj.] cannot be used when [XLR Mic Adaptor Setting] is set to other than [OFF].
12. Connections with External Devices (Video) Headphones You can record videos while monitoring their sound by connecting commercially available headphones to the camera. 0 Do not use the headphone cables with the length of 3 m (9.8 feet) or more. 0 When headphones are connected, beep sounds, AF beep, and electronic shutter sounds are muted. Switching the Sound Output Method ¨[ ]¨[ [REALTIME] [REC SOUND] ] ¨ Select [Sound Output] Audio without time lag.
12. Connections with External Devices (Video) Adjusting the Headphone Volume Connect the headphones and rotate . : Reduces the volume. : Increases the volume. 0 You can also adjust the volume by touching [ ]/[ ] on the playback screen. To adjust the volume using the menu: 1 Select [Headphone Volume]. ¨[ 0 ]¨[ ] ¨ [Headphone Volume] 2 Press 34 to adjust the headphone volume and then press . 0 It can be adjusted in a range of [0] to [LEVEL15].
13. Playing Back and Editing of Images This chapter explains how to play back and delete pictures and videos. It also explains editing using [RAW Processing] (l 359) and [Video Divide] (l 364). 0 For [Playback] menus other than [RAW Processing] and [Video Divide], refer to “[Playback] Menu” beginning on page 456. Playing Back Pictures 1 Display the playback screen. 2 Select a picture. ≥Press [(]. A Card slot 1/999 ≥Select the pictures by pressing 21.
13. Playing Back and Editing of Images 3 Stop playback. ≥Press the shutter button halfway. ≥You can also stop playback by pressing [(]. Switching the Card to Display Images are displayed separately by card slot. You can switch the card displayed just by pressing the Fn button during playback. 0 Use the Fn button registered with [Card Slot Change] to operate. In default settings, this is registered in [ ]. For information about the Fn button, refer to page 367. 1 Press [ ].
13. Playing Back and Editing of Images Playing Back Videos 1 Display the playback screen. 2 Select a video. ≥Press [(]. 0 For information about how to select 8m30s images, refer to page 347. ] video icon is displayed for a video. 0 The [ A Video recording time 0 The video recording time is displayed on the screen. Example) When 8 minutes 30 seconds: 8m30s 0 h: hour, m: minute, s: second 3 4 Play back the video. B Elapsed playback time C Playback bar ≥Press 3.
13. Playing Back and Editing of Images Operations During Video Playback Button operation Touch operation 3 / 4 — Description of operation Plays/pauses. Stops. Performs fast-rewind playback. 0 If you press 2 again, the fast-rewind speed increases. 2 1 — — Performs frame-by-frame rewinding (while paused). 0 When you press 2 during playback of AVCHD video, rewinding at intervals of approx. 0.5 seconds is activated. Performs fast-forward playback.
13. Playing Back and Editing of Images Extracting a Picture Extract one frame of a video and save it as a JPEG image. 1 Pause playback at the position you wish to extract a picture. ≥Press 3. 0 To fine-adjust the position, press 21 (rewind frame-by-frame or forward frameby-frame). 2 00:06:10 00:08:30 Save the picture. ≥Press or . 0 You can also save the picture by touching [Save]. 0 The picture created from the video is saved with a [FINE] picture quality.
13. Playing Back and Editing of Images Switching the Display Mode You can use features to do things like enlarge recorded images for display and switch to thumbnail display to display multiple images at once (multiplayback). You can also switch to calendar display to show images of a selected recording date. Enlarged Display Playback images can be displayed enlarged (Playback Zoom). Enlarging the playback screen. 2.0X ≥Rotate to the right. ≥The playback screen is enlarged in the order of 2k 4k 8k 16k.
13. Playing Back and Editing of Images Operations During Enlarged Display Button operation Touch operation s Pinch out/ pinch in 3421 Drag s s Description of operation Enlarges/reduces the screen. Enlarges/reduces the screen in small steps. Moves the enlarged display position. Positions can be moved to the diagonal directions using the joystick. Forwards or rewinds images while maintaining the same zoom magnification and zoom position. 0 You can display the point focused with AF.
13. Playing Back and Editing of Images Thumbnail Screen 1 Switch to thumbnail display. 1/999 ≥Rotate to the left. ≥The display is switched in the order of 12-image screen 30-image screen. A Card 0 An orange frame is shown around the selected image. to the left during 30-image screen display switches to calendar display. (l 355) 0 Rotating to the right returns to the previous display. 0 You can also switch the display by touching an icon.
13. Playing Back and Editing of Images Calendar Playback 1 2 3 Switch to calendar playback. ≥Rotate to the left. ≥The display is switched in the order of thumbnail screen (12 images) Thumbnail screen (30 images) Calendar playback. 0 Rotating SUN MON TUE WED THU FRI SAT 2019 12 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 to the right returns to the previous display. Select the recording date.
13. Playing Back and Editing of Images Group Images Images recorded with Time Lapse Shot or Stop Motion Shooting are handled as group images in the camera, and can be deleted and edited on a group basis. (For example, if you delete a group image, all images in the group are deleted.) You can also delete and edit each image in a group individually. Images Handled as Group Images by the Camera Group images saved with [6K/4K PHOTO Bulk Saving]. 1/999 SLF Group images recorded with Focus Bracket.
13. Playing Back and Editing of Images Deleting Images 0 Images cannot be restored once they have been deleted. Carefully confirm the images before deletion. 0 You can only delete the images in the card of the selected card slot. 0 If you delete a group image, all images in the group are deleted. [Delete Single] 1 Press [ ] in playback state. 2 Press 34 to select [Delete Single] and then press or . [Delete Multi]/[Delete All] 1 Press [ ] in playback state.
13. Playing Back and Editing of Images 0 To switch the card selected for deleting images, press [ ] and then select the card slot. 0 Depending on the number of images to be deleted, it may take some time to delete them. 0 [Delete All] can be used when [Playback Mode] is set to [Normal Play].
13. Playing Back and Editing of Images [RAW Processing] This processes pictures taken in RAW format on the camera and saves them in JPEG format. You can also save images recorded with [HLG Photo] in the RAW format as HLG format. 1 Select [RAW Processing]. 2 Select the RAW image. ≥ ¨[ ]¨[ Processing] ] ¨ [RAW ≥Press 21 to select an image and then press or . 0 When group images are selected, press 3 and then select an image in the group. 6HW Press 3 again to return to the normal selection screen.
13. Playing Back and Editing of Images 4 Change the setting. ≥Rotate , , or . 0 The image can be enlarged/reduced by pinching out/pinching in the screen. DISP. -2 5 Confirm the setting. ≥Press or . ≥The screen of Step reappears. To set another item, repeat Steps 3 6 360 3 to 5. Save the image. ≥Press 34 to select [Begin Processing] and then press .
13. Playing Back and Editing of Images Setting Items ([RAW Processing]) [Begin Processing] Saves the image. [White Balance] Selects and adjusts the white balance. Selecting the item with [ ] enables processing with the same setting as at the time of recording. 0 If you press 4 in the [White Balance] selection screen, the white balance adjustment screen appears. 0 If you press 3 while [ 1 ] to [ 4 ] is selected, the colour temperature setting screen appears.
13. Playing Back and Editing of Images [Noise Reduction] [Sharpness] [More Settings] Sets noise reduction. Adjusts the sharpness. [Revert To Original]: Returns the settings to the ones from the time of recording. [File Format]: Selects a file format from [JPG] or [HLG]. When you select [HLG], both JPEG format and HSP format pictures are saved. (Only images recorded with [HLG Photo]) [Color Space]: Selects a Colour Space setting from [sRGB] or [AdobeRGB].
13. Playing Back and Editing of Images Displaying a Comparison Screen You can change a setting while checking the effect by displaying images with the applied setting value side by side. 1 Press [DISP.] in the screen of Step 4. 0 The image with the current setting A is displayed at the centre. 0 Touching the image with the current setting enlarges it. Touching [ ] returns to the original display. 0 A comparison screen cannot be displayed while [Noise Reduction] or [Sharpness] is selected.
13. Playing Back and Editing of Images [Video Divide] Divide a recorded video or 6K/4K burst file into two. 0 Images cannot be returned to their original state once they have been divided. Carefully confirm the images before performing the divide operation. 0 Do not remove the card or battery from the camera during the divide process. The images may be lost. 1 Select [Video Divide]. 2 Select and play the image. 3 ≥ ¨[ Divide] ]¨[ ] ¨ [Video ≥Press 21 to select an image and then press or .
13. Playing Back and Editing of Images 4 Divide the video. ≥Press or . ≥You can also divide the video by touching [Divide]. 0 Dividing the video at a point close to the start or end may not be possible. 0 Videos with a short recording time cannot be divided. 0 [Video Divide] cannot be used on images recorded using [Segmented File Recording].
14. Camera Customisation This chapter describes the customisation function with which you can configure the camera to your preferred settings. Change how buttons, dials, etc. on the camera are to be operated. [Fn Button Set] l 367 [Dial Operation Switch Setup] l 376 Register the currently set information of the camera. Custom mode l 383 Change menu display items. Quick menu l 378 My Menu l 387 Import camera settings information onto another camera.
14. Camera Customisation Fn Buttons You can register functions to the Fn (Function) buttons. Additionally, you can register other functions to specialised buttons such as [WB] button, in the same way as with the Fn buttons. Different functions can be set for both during recording and playback. Fn Button Default Settings 1 2 8 1 2 3 4 5 6 7 8 9 10 11 12 13 456 7 9 Fn buttons Sub video rec. button [Fn1] [Fn2] [WB] [ISO] [ ] Video rec. button [LVF] [V.
14. Camera Customisation Fn3 Fn4 Fn5 Fn6 OFF Fn7 OFF 14 15 Fn buttons 14 [Setting in REC mode] [Fn3] [Wi-Fi] [Fn4] [Histogram] [Fn5] [Boost I.S. (Video)] [Fn6] [No Setting] [Fn7] [No Setting] 16 [Setting in PLAY mode] [Fn8] [Fn9] 15 [Fn10] [No Setting] [Fn11] [Fn12] [Fn13] 16 [Fn14] [No Setting] [Fn15] [Fn16] 368 0 Cannot be used as Fn buttons during playback.
14. Camera Customisation Register Functions to the Fn Buttons 0 With default settings, [Fn8] to [Fn12] on the joystick cannot be used. When using functions, set the [Joystick Setting] in the [Custom] ([Operation]) menu to [Fn]. (l 429) 1 Select [Fn Button Set]. 2 Select the button. ≥ ¨[ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode]/ [Setting in PLAY mode] ≥Press 34 to select the button and then press or . ≥Selection is also possible by rotating or . 0 Press [DISP.] to change the page.
14. Camera Customisation 4 Register the function. ≥Press 34 to select a function and then press or . ≥Selection is also possible by rotating or . 0 Select items with [N] by selecting the item again. 0 Depending on the button, some functions cannot be registered. 0 You can also touch [ Fn ] on the control panel (l 70) to display the screen in Step 2. 0 You can also press and hold the Fn button (2 sec.) to display the screen in 4 Step .
14. Camera Customisation Setting Items ([Fn Button Set]/[Setting in REC mode]) [1] tab [Image Quality] [Focus/Shutter] [Exposure Comp.
14. Camera Customisation [Silent Mode] l 174 [Image Stabilizer] l 177 [Shutter Type] l 175 [Ex. Tele Conv.] l 128 [Flicker Decrease (Photo)] l 407 l 160 [Post-Focus] l 166 [Motion Pic. Rec Format] l 255 [Q.MENU] [Motion Pic. Rec Quality] l 255 [Rec Quality (My List)] l 265 [Rec / Playback Switch] 0 Switches to the playback screen. [Others (Photo)] [Drive Mode] l 131 [1 Shot "6K/4K PHOTO"] 0 Performs 6K/4K photo recording only once.
14. Camera Customisation [Video-Priority Display] l 441 [Lens / Others] [Status-LCD Display(Video)] l 248 [Focus Ring Control] l 443 [Zebra Pattern] l 440 [Zoom Control] l 129 [LUT View Assist (Monitor)] l 310 [LUT View Assist (HDMI)] l 310 [LUT Select] l 310 [HLG View Assist (Monitor)] l 314 [HLG View Assist (HDMI)] l 314 [Sheer Overlay] l 437 [I.S.
14. Camera Customisation Setting Items ([Fn Button Set]/[Setting in PLAY mode]) [1] tab [Playback Mode] [Operation] [Magnify from AF Point] l 458 [LUT View Assist (Monitor)] l 310 [Rec / Playback Switch] 0 Switches to the recording screen. [HLG View Assist (Monitor)] l 439 [LVF/Monitor Switch] l 69 [Anamorphic Desqueeze Display] l 316 [Video Record] l 242 [RAW Processing] l 359 [Night Mode] [6K/4K PHOTO Bulk Saving] l 148 [Process Image] [Monitor / Display] [Add/Delete Info.
14. Camera Customisation Use the Fn Buttons During recording, pressing the Fn buttons enables usage of the functions registered in [Setting in REC mode], and during playback, usage of the functions registered in [Setting in PLAY mode]. 1 2 Press the Fn button. Select a setting item. ≥Press 21 to select a setting item and then press or . ≥Selection is also possible by rotating , or . 0 Display and selection methods of a setting item differ depending on the menu item.
14. Camera Customisation [Dial Operation Switch] This temporarily changes the functions operated with (rear dial). (front dial) and Register Functions to the Dials Register functions to each of 1 2 – – – – – – . Select [Dial Operation Switch Setup]. ≥ and ¨[ ]¨[ ] ¨ [Dial Set.] ¨ [Dial Operation Switch Setup] ¨ [ ]/[ ] Register the function. ≥Press 34 to select a function and then press or . Functions That Can Be Registered [Exposure Comp.
14. Camera Customisation Temporarily Change Dial Operation Use the Fn button to temporarily change dial operation. 1 2 Set [Dial Operation Switch] to the Fn button. (l 367) Switch dial operation. 1 ≥Press the Fn button set in Step . ≥A guide will display the functions registered to and . WB 0 If no operations are performed, then ISO several seconds later, the guide disappears. 3 Set the registered function. ≥Rotate or is displayed.
14. Camera Customisation Quick Menu Customisation You can change Quick menu items depending on the recording mode. Additionally, you can change the items to display on the Quick menu and their order to suit your preferences. For information about Quick menu operation methods, refer to page 73. Register to the Quick Menu Change the menus to be displayed in the Quick menu. These can be set separately for [ ] mode (Video) and for other recording modes (Photo). 1 2 Select [Q.MENU Settings].
14. Camera Customisation 3 4 Find the function to register. ≥Rotate to select the sub tab where the function to register is categorised (l 380) and then press or . ≥You can also select by pressing 2 to select the sub tab, pressing 34 or rotating , and then pressing 1. ≥Each press of [Q] switches between tabs [1] and [2]. Register menu items. ≥Press 34 to select an item and then press or . ≥Selection is also possible by rotating or . 0 Select items with [N] by selecting the item again.
14. Camera Customisation Menu Items That Can Be Registered [1] tab [Image Quality] [Others (Photo)] [Exposure Comp.] l 197 [Drive Mode] l 131 [Dual Native ISO Setting] l 203 [Bracketing] l 160 [Sensitivity] l 200 [Silent Mode] l 174 [White Balance] l 204 [Image Stabilizer] l 177 [Photo Style] l 210 [Shutter Type] l 175 [Metering Mode] l 185 [Ex. Tele Conv.
14. Camera Customisation [2] tab [Monitor / Display] [Lens / Others] [Constant Preview] l 431 [Focus Ring Control] [Level Gauge] l 438 [Card/File] [Histogram] l 432 [Luminance Spot Meter] l 292 [Video Frame Marker] l 295 [Wi-Fi] l 465 [Photo Grid Line] l 433 [Fan Mode] l 442 [Live View Boost] l 434 [Monochrome Live View] l 440 [No Setting] [Night Mode] l 435 • Set when not using. [LVF/Monitor Disp.
14. Camera Customisation Quick Menu Detailed Settings Change the appearance of the Quick menu and the operation of during menu display. ¨[ ]¨[ ] ¨ Select [Q.MENU Settings] [Layout Style] Changes the appearance of the Quick menu. [MODE1]: Displays the live view and the menu simultaneously. [MODE2]: Displays the menu in full screen. [Front Dial Assignment] Changes the operation of in the Quick menu. [Item]: Selects menu items. [Value]: Selects setting values.
14. Camera Customisation Custom Mode Recording modes and menu settings that match your preferences can be registered in Custom mode. You can use registered settings by switching the mode dial to [C1] to [C3] modes. Register in Custom Mode You can register the currently set information of the camera. At the time of purchase, the default settings of the [P] mode menus are registered with all Custom modes. 1 Set to recording mode and menu settings of the state you wish to save.
14. Camera Customisation 0 You cannot register [iA] mode in Custom mode. 0 List of settings that can be registered in Custom mode (l 587) Custom Mode Detailed Settings Sets the ease of use of Custom mode. You can create additional Custom mode sets, and how long to retain temporarily changed settings details. ¨[ ]¨[ ] ¨ Select [Custom Mode Settings] [Limit No. of Custom Mode] Sets the number of Custom modes that can be registered in [C3].
14. Camera Customisation Using Custom Mode Set the mode dial to one of [C1] to [C3]. ≥ If [C3], the last-used Custom mode will be called up. [C3] Custom Mode Selection 1 Set the mode dial to [C3]. 2 Press . 0 The Custom mode selection menu appears. 3 Press 34 to select the Custom mode and then press or . 0 The selected Custom mode icon will be displayed on the recording screen.
14. Camera Customisation Calling Up Settings Call up registered Custom mode settings to the selected recording mode and overwrite the current settings with these. 1 2 3 Set to the mode dial to use. Select [Load Custom Mode]. ≥ ¨[ ]¨[ Custom Mode] ] ¨ [Load Select the Custom mode to call up. ≥Select the Custom mode and then press or . 0 Calling up of Custom modes is not possible between those created from [P]/ [A]/[S]/[M] modes and those created from [ 386 ] mode.
14. Camera Customisation My Menu Register frequently-used menus in My Menu. A maximum of 23 items can be registered. Registered menus can be called up from [ ] to [ ]. Registration in My Menu Select a menu, and register this in My Menu. 1 Select [Add]. 2 Register. ≥ ¨[ ]¨[ ] ¨ [Add] ≥Select the menu to register and then press or . Calling up My Menu Call up the menus registered in My Menu.
14. Camera Customisation Edit My Menu You can reorder the display order of My Menu, and delete unnecessary menus. ¨[ ] ¨ Select [ [Add] Selects and registers the menus to be displayed in My Menu. [Sorting] Changes the order of My Menu. Select the menu to change, then set the destination. [Delete] Deletes menus that are registered to My Menu. [Delete Item]: Selects the menu, then deletes. [Delete All]: Deletes all menus registered in My Menu.
14. Camera Customisation [Save/Restore Camera Setting] Saves the camera’s settings information to the card. Saved settings information can be loaded to the camera, letting you set the same settings on multiple cameras. ¨[ ]¨[ ] ¨ Select [Save/Restore Camera Setting] Saves the camera’s settings information to the card. 0 If saving new data, then select [New File], and if overwriting an existing file, select that existing file.
15. Menu Guide Camera customisation and many function settings are performed with menus on this camera. This chapter provides a list of menus and describes them in detail. Menus explained in detail in other chapters are indicated with page numbers. 0 For information about menu operation methods, refer to page 77.
15. Menu Guide List of Menu : Menu items common to the [Photo] menu and [Video] menu. Their settings are synchronised. [Photo] menu l 396 [Flash Adjust.] l 403 [Photo Style] l 396 [Flash Synchro] l 403 [Metering Mode] l 396 [Manual Flash Adjust.] l 403 [Aspect Ratio] l 396 [Auto Exposure Comp.
15. Menu Guide [Video] menu [Image Quality] l 410 [Exposure Mode] l 410 [Photo Style] l 410 [Metering Mode] l 410 [1-Area AF Moving Speed] l 413 [Audio] l 413 [Sound Rec Level Disp.] l 413 [Mute Sound Input] l 413 [Sound Rec Gain Level] l 414 [Dual Native ISO Setting] l 410 [ISO Sensitivity (video)] l 410 [Sound Rec Level Adj.
15. Menu Guide [Custom] menu [Image Quality] l 418 [ISO Displayed Setting] l 427 [Photo Style Settings] l 418 [ISO Increments] l 418 [Exposure Comp. Disp. Setting] l 427 l 419 [Dial Set.] l 428 [Exposure Offset Adjust.] l 419 [Joystick Setting] l 429 [Color Space] l 420 [Illuminated Button] l 429 [Exposure Comp. Reset] l 420 [Video Rec.
15.
15. Menu Guide [Setup] menu (Continued) l 454 [Pixel Refresh] l 454 [Clock Set] l 454 [Sensor Cleaning] l 454 [Time Zone] l 454 [Language] l 455 [System Frequency] l 454 [Firmware Version] l 455 [Online Manual] l 455 [Others] [My Menu] [Page 1] l 387 [Page 2] l 387 [Add] [Edit My Menu] l 388 l 388 [Page 3] l 387 [Sorting] l 388 [Delete] l 388 [Display from My Menu] l 388 [Add/Delete Info.
15. Menu Guide [Photo] Menu : Menu items common to the [Photo] menu and [Video] menu. Their settings are synchronised. `: Default settings [Photo] menu ¨ [Photo Style] [Image Quality] `[Standard]/[Vivid]/[Natural]/[Flat]/[Landscape]/ [Portrait]/[Monochrome]/[L.Monochrome]/ [L.
15. Menu Guide [Photo] menu ¨ [Image Quality] [Start] [High Resolution Mode] [Simul Record Normal Shot] `[ON]/[OFF] [Shutter Delay] [30 SEC] to [1/8 SEC] (`[2 SEC])/[OFF] [Motion Blur Processing] `[MODE1]/[MODE2] l 222 Merges pictures with a high resolution from multiple recorded images. `[ON]/[OFF] The camera automatically removes noise generated when recording images with a slow shutter speed. [Long Exposure NR] 0 Recording is not possible during noise reduction.
15. Menu Guide [Photo] menu ¨ [ISO Sensitivity (photo)] [Image Quality] [ISO Auto Lower Limit Setting] `[100] to [25600] [ISO Auto Upper Limit Setting] `[AUTO]/[200] to [51200] — Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO]. `[AUTO]/[1/8000] to [1/1] [Min. Shutter Speed] Sets the minimum shutter speed when the ISO sensitivity is set to [AUTO].
15. Menu Guide [Photo] menu ¨ [Image Quality] [AUTO]/[HIGH]/[STANDARD]/[LOW]/`[OFF] Contrast and exposure are compensated when the brightness difference between the background and subject is great. 0 Compensation effect may not be achieved depending on the recording conditions. [i.Dynamic Range] 0 When the following functions are being used, — [i.
15. Menu Guide [Photo] menu ¨ [Image Quality] `[ON]/[OFF] When the screen periphery darkens as a result of the lens characteristics, you can record pictures with the brightness of the screen periphery corrected. 0 Compensation effect may not be achieved depending on the recording conditions. 0 Noise in the periphery of the picture may stand out with higher ISO sensitivity. [Vignetting Comp.] 0 When the following function is being used, — [Vignetting Comp.
15. Menu Guide [Photo] menu ¨ [Filter Settings] [Image Quality] [Filter Effect] [ON]/`[OFF]/[SET] [Simultaneous Record w/o Filter] [ON]/`[OFF] l 216 This mode records with additional image effects (filters). [Photo] menu ¨ [Focus] `[Set 1]/[Set 2]/[Set 3]/[Set 4] [AF Custom Setting(Photo)] Select features of AF operation when recording using [AFC] that are appropriate for the subject and scene.
15. Menu Guide [Photo] menu ¨ [Focus] `[ON]/[OFF] [SET] [Focus Peaking Sensitivity] [Display Color] [Display While AFS] During MF operation, in-focus portions (portions on the screen with clear outlines) are highlighted with colour. 0 If the [Focus Peaking Sensitivity] is adjusted to [Focus Peaking] 0 0 0 0 0 0 402 the negative direction, portions to be highlighted are reduced, allowing you to achieve a more precise focus.
15. Menu Guide [Photo] menu ¨ [Focus] `[FAST]/[NORMAL] [1-Area AF Moving Speed] Sets the speed when moving a single AF area. This operates when AF mode is set to [ ], [ or [ ]. 0 This menu item can be registered to the Fn button. (l 367) [Photo] menu ¨ [Flash Mode] `[‰]/[ ] — [Flash] ]/[ ]/[ ]/[Œ] Sets the flash mode. l 231 `[TTL]/[MANUAL] [Firing Mode] You can select whether to set the flash output automatically or manually. l 234 [j3 EV] to [i3 EV] (`[±0 EV]) [Flash Adjust.
15. Menu Guide [Photo] menu ¨ [Flash] [ON]/`[OFF] [Red-Eye Removal] [Wireless] When [Flash Mode] is set to [ ] or [ ], the camera automatically detects red-eye and corrects image data. [ON]/`[OFF] Enables recording using a wireless flash. l 233 l 239 `[1CH]/[2CH]/[3CH]/[4CH] [Wireless Channel] Sets the channel to use when recording with a wireless flash. l 239 [ON]/`[OFF] [Wireless FP] Uses FP firing for an external flash when recording with a wireless flash.
15. Menu Guide [Photo] menu ¨ [Others (Photo)] [Bracketing Type] [Bracketing] [ [ ]/[ ]/[ ]/`[OFF] ]/[ ]/ l 160 [More Settings] You can take multiple pictures while automatically adjusting a setting. [ON]/`[OFF] [Silent Mode] [Image Stabilizer] Disables all operation sounds and light output at once. [Operation Mode] `[ [ ]/[ ]/[ ]/[OFF] [Body(B.I.S.) / Lens(O.I.S.)] [ ]/`[ [When to Activate] [ALWAYS]/`[HALFSHUTTER] [E-Stabilization (Video)] [ON]/`[OFF] [Boost I.S.
15. Menu Guide [Photo] menu ¨ [Others (Photo)] [8SEC]/[4SEC]/[2SEC]/[1SEC]/`[OFF] [Shutter Delay] To reduce camera shake and shutter-induced blur, the shutter is released after the specified time has passed since the shutter button was pressed. — 0 When the following functions are being used, [Shutter Delay] is not available: – Video recording/[6K/4K PHOTO]/[Post-Focus] – [High Resolution Mode] [ZOOM]/[TELE CONV.]/`[OFF] [Ex. Tele Conv.
15. Menu Guide [Photo] menu ¨ [Others (Photo)] [ON]/`[OFF] Detects flickering such as that under fluorescent lighting, and records using a timing that minimises this. 0 The reduction effect may not be obtained [Flicker Decrease (Photo)] [6K/4K PHOTO] depending on the recording conditions. 0 When Flicker Decrease is operating, the — [FLICKER] icon will be displayed in yellow on the recording screen.
15. Menu Guide [Photo] menu ¨ [Others (Photo)] [6K 18M]/[4K 8M]/`[OFF] [Post-Focus] Taking burst pictures with the same image quality as 6K/4K photos while automatically changing the focus point. You can select the focus point for the picture to save after recording. l 166 [Start] [Auto Gain] `[ON]/[OFF] [Overlay] [ON]/`[OFF] You can apply an effect equivalent to four exposures on a single image. [Multiple Exposure] [Start]: Starts exposure for multiple exposures.
15. Menu Guide [Photo] menu ¨ [Others (Photo)] 0 Recording the picture will automatically stop multiple exposure recording. 0 To finish multiple exposure recording before [Multiple Exposure] (Continued) starting the recording, press [Q] on the recording screen. 0 Recording information for the last-recorded image will be saved as recording information for images recorded with multiple exposures. 0 [Overlay] can be set only for RAW images recorded with the camera.
15. Menu Guide [Video] Menu : Menu items common to the [Photo] menu and [Video] menu. Their settings are synchronised. `: Default settings [Video] menu ¨ [Exposure Mode] [Photo Style] [Image Quality] `[P]/[A]/[S]/[M] Sets the exposure mode to use in [ ] mode. `[Standard]/[Vivid]/[Natural]/[Flat]/[Landscape]/ [Portrait]/[Monochrome]/[L.Monochrome]/ [L.
15. Menu Guide [Video] menu ¨ [Image Quality] [1/50]/[1/60]/[1/100]/[1/120]/`[OFF] [Flicker Decrease (Video)] [Master Pedestal Level] The shutter speed can be fixed to reduce the flicker or striping in the video. 0 This can be set when [Auto Exposure in P/A/S/ M] is [ON]. — [j15] to [15] (`[0]) You can adjust the black level, which serves as the reference for images.
15. Menu Guide [Video] menu ¨ [Rec. File Format] [Image Format] [AVCHD]/`[MP4]/[MOV] Sets the video recording file format. [Image Area of Video] `[FULL]/[S35mm]/[PIXEL/PIXEL] [Rec Quality] Sets the video recording image quality. [Rec Quality (My List)] Calls up a recording quality registered in My List. [Variable Frame Rate] Sets the image area during video recording. l 255 l 266 l 255 l 265 [ON]/`[OFF] Varies the recording frame rate to record slow motion video and fast motion video.
15. Menu Guide [Video] menu ¨ [Focus] [ON]/`[OFF] [AF Custom Setting(Video)] [SET] [AF Speed]/ [AF Sensitivity] l 277 You can fine-adjust the focusing method for video recording using [Continuous AF]. `[MODE1]/[MODE2]/[OFF] [Continuous AF] You can select how to set the focus in AF when recording videos. l 275 `[ON]/[OFF] [AF Assist Light] When recording in low light conditions, the AF assist light turns on when you press the shutter button halfway, making it easier for the camera to focus.
15. Menu Guide [Video] menu ¨ [Audio] [Sound Rec Gain Level] `[STANDARD]/[LOW] [Sound Rec Level Adj.] [MUTE], [j18dB] to [i12dB] (`[0dB]) This switches the gain of audio input. Manually adjust the sound recording level. l 284 l 284 `[ON]/[OFF] [Sound Rec Level Limiter] [Wind Noise Canceller] The sound recording level is adjusted automatically to minimise sound distortion (crackling noise).
15. Menu Guide [Video] menu ¨ [Headphone Volume] [Audio] [0] to [LEVEL15] (`[LEVEL3]) l 346 Adjusts the volume when headphones are connected. [Video] menu ¨ [Others (Video)] [ON]/`[OFF] [Silent Mode] [Image Stabilizer] Disables all operation sounds and light output at once. [Operation Mode] `[ [ ]/[ ]/[ ]/[OFF] [Body(B.I.S.) / Lens(O.I.S.
15. Menu Guide [Video] menu ¨ [Others (Video)] [Start] [Focus Transition] [Focus Pull Setting] [1]/[2]/[3] [Focus Transition Speed] [SH]/[H]/`[M]/[L]/[SL] [Focus Transition Rec] [1]/[2]/[3]/`[OFF] [Focus Transition Wait] [10SEC]/[5SEC]/`[OFF] l 301 Smoothly transitions the focus position from the current position to a position registered in advance.
15. Menu Guide [Video] menu ¨ [Others (Video)] [ON]/`[OFF] [Time Stamp Rec.] Records the recorded date and time superimposed on the images. 0 You cannot delete recording dates after superimposing them. 0 The recorded date and time are not recorded in 6K/4K burst files or RAW images. 0 When the following functions are being used, [Time Stamp Rec.] is not available: – [Post-Focus] – [High Resolution Mode] – 6K video/5.9K video/5.
15. Menu Guide [Custom] Menu `: Default settings [Custom] menu ¨ [Image Quality] [Show/Hide Photo Style] [Vivid]/[Natural]/[Flat]/[Landscape]/ [Portrait]/[L.Monochrome]/ [L.Monochrome D]/[Cinelike D2]/ [Cinelike V2]/[Like709]/[V-Log]/ [Like2100(HLG)]/[MY PHOTO STYLE 1] to [MY PHOTO STYLE 10] Sets Photo Style items to be displayed on the menu. [Photo Style Settings] [My Photo Style Settings] [Add Effects] [Load Preset Setting] Enables detailed image quality adjustment settings for My Photo Style.
15. Menu Guide [Custom] menu ¨ [Image Quality] [ON]/`[OFF] [Extended ISO] [Exposure Offset Adjust.] Extends the setting range of ISO sensitivity. 0 The extendible range depends on the [Dual Native ISO Setting] (l 203).
15. Menu Guide [Custom] menu ¨ [Image Quality] `[sRGB]/[AdobeRGB] This sets the method for correcting the colour reproduction of the recorded images on the screens of a PC or on a device such as a printer. [Color Space] [sRGB]: This is widely used in PCs and similar devices. [AdobeRGB]: AdobeRGB is mainly used for business purposes such as professional printing because it has a greater range of reproducible colours than sRGB. 0 Set to [sRGB] if you are not very familiar with AdobeRGB.
15. Menu Guide [Custom] menu ¨ [Focus/Shutter Priority] [Focus/Shutter] [AFS] `[FOCUS]/[BALANCE]/[RELEASE] [AFC] [FOCUS]/`[BALANCE]/[RELEASE] This sets whether to give priority to focus or shutter release during AF. [FOCUS]: Disables recording when focus is not achieved. [BALANCE]: Performs recording while controlling the balance between focusing and shutter release timing. [RELEASE]: Enables recording even when focus is not achieved.
15. Menu Guide [Custom] menu ¨ [Focus/Shutter] [Focus Ring] `[ON]/[OFF] [AF Mode] `[ON]/[OFF] [Press Joystick] [ON]/`[OFF] [MF Assist Display] [FULL]/`[PIP] This sets the display method of MF Assist (enlarged screen). [MF Assist] [Focus Ring]: The screen is enlarged by focusing with the lens. [AF Mode]: The screen is enlarged by pressing [ ]. [Press Joystick]: Press the joystick to enlarge the display. (if [Joystick Setting] is set to [D.
15. Menu Guide [Custom] menu ¨ [Show/Hide AF Mode] [Focus/Shutter] [Face/Eye/Body/ Animal Detect.] `[ON]/[OFF] [Tracking] `[ON]/[OFF] [225-Area] `[ON]/[OFF] [Zone (Vert./ Horz.)] `[ON]/[OFF] [Zone (Square)] [ON]/`[OFF] [Zone (Oval)] `[ON]/[OFF] [1-Area+] `[ON]/[OFF] [Pinpoint] `[ON]/[OFF] [Custom1] [ON]/`[OFF] [Custom2] [ON]/`[OFF] [Custom3] [ON]/`[OFF] Sets the AF mode items to be displayed on the AF mode selection screen.
15. Menu Guide [Custom] menu ¨ [AF-Point Scope Setting] [Focus/Shutter] [Keep Enlarged Display] [ON]/`[OFF] [PIP Display] [FULL]/`[PIP] Changes the enlarged screen settings of AF-Point Scope (l 100). [Keep Enlarged Display]: Setting this to [ON] maintains the enlarged screen after pressing the Fn button until it is pressed again. [PIP Display]: Sets the display method (full screen mode/ windowed mode) of the enlarged screen.
15. Menu Guide [Custom] menu ¨ [Focus/Shutter] [ON]/`[OFF] [Looped Focus Frame] When moving the AF area or MF Assist, this enables its position to loop from one edge to the other edge of the screen. [ON]/`[OFF] [AFC Start Point (225-Area)] When the focus mode is set to [AFC] in the [ you can specify which area to start [AFC]. 0 For details, refer to page 110. [Custom] menu ¨ [Q.
15. Menu Guide [Custom] menu ¨ [Lock Lever Setting] [Operation] [Cursor] `[ ]/[ ] [Joystick] `[ ]/[ ] [Touch Screen] `[ ]/[ ] [Dial] `[ ]/[ ] Sets the operations to be disabled with the operation lock lever. (Only for recording screen) [Cursor]: Cursor buttons, [MENU/SET] button, and [Joystick]: Joystick [Touch Screen]: Touch screen [Dial]: , , and [Setting in REC mode] [Fn Button Set] 426 [Setting in PLAY mode] Registers a function to the Fn button. 0 For details, refer to page 369.
15. Menu Guide [Custom] menu ¨ [Operation] [WHILE PRESSING]/[AFTER PRESSING1]/`[AFTER PRESSING2] This sets the operation to be performed when [WB] (White balance), [ISO] (ISO sensitivity) or [ ] (Exposure compensation) is pressed. [WB/ISO/Expo. Button] [WHILE PRESSING]: Allows you to change the setting while pressing and holding the button. Release the button to confirm the settings value, and to return to the recording screen. [AFTER PRESSING1]: Press the button to change settings.
15. Menu Guide [Custom] menu ¨ [Operation] [Assign Dial (F/SS)] `[SET1]/[SET2]/[SET3]/[SET4]/ [SET5] Sets the operations to be assigned to the dials in [P]/[A]/[S]/ [M] modes. : Programme Shift, F: Aperture value, SS: Shutter speed [P] [SET1] s [SET2] s [SET3] s [SET4] [Dial Set.
15. Menu Guide [Custom] menu ¨ [Operation] [Exposure Comp.] [ ]/[ ]/`[OFF] Assigns exposure compensation to or . (Except in [M] mode) 0 The [Assign Dial (F/SS)] setting takes priority. [Dial Set.] (Continued) [Dial Operation Switch Setup] [ ] [ ] In the Fn button [Dial Operation Switch], this sets the functions to be registerd temporarily to or . (l 376) [Rotation (Menu Operation)] `[ [ ]/[ ]/[ ]/ ] Changes the rotational direction of the dials when operating menus. `[D.
15. Menu Guide [Custom] menu ¨ [Video Rec. Button (Remote)] [Operation] You can register a favourite function to the video rec. button on a Shutter Remote Control (optional). 0 [Video Record] is registered in the default setting. 0 For details, refer to page 540.
15. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] [ON]/`[OFF] [SET] [Constant Preview] [Preview While MF Assist] You can always confirm the effects of aperture and shutter speed on the recording screen when in [M] mode. Preview also operates in the MF Assist screen when [Preview While MF Assist] is set to [ON]. 0 This function does not work when using the flash. 0 This menu item can be registered to the Fn button.
15. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] [ON]/`[OFF] This displays the histogram. Turning this [ON] displays the histogram transition screen. Press 3421 to set the position. Positions can be moved to the diagonal directions using the joystick. 0 You can also move the position by dragging the histogram on the recording screen.
15. Menu Guide [Custom] menu ¨ [ [Photo Grid Line] [Monitor / Display (Photo)] ]/[ ]/[ ]/`[OFF] Sets the grid line pattern to be displayed on the recording screen. When using [ ], you can press 3421 to set the position. Positions can be moved to the diagonal directions using the joystick. 0 When using [ ], you can also drag [ ] on the grid lines on the recording screen to move the position. 0 This menu item can be registered to the Fn button.
15. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] [MODE1]/[MODE2]/`[OFF] [SET] [P/A/S/M]/`[M] Displays the screen brighter to make it easier to check subjects and compositions even in low-light environment. [MODE1]: Setting for low brightness, with priority given to a soft display. [MODE2]: Setting for high brightness, with priority given to image visibility. 0 You can change the recording mode in which [Live View [Live View Boost] Boost] works by using [SET].
15. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] [Monitor] [ON]/`[OFF] [LVF] [ON]/`[OFF] Displays the monitor and viewfinder in red. In dark environments, this reduces brightness of the screen that can make the surroundings difficult to see. You can also set the luminance of the red display. 1 [Night Mode] 2 3 Press 3421 to select [ON] on the monitor or viewfinder (LVF). Press [DISP.] to display the brightness adjustment screen.
15. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] [ON]/`[OFF] This displays the exposure meter. SS F [Expo.Meter] 125 30 60 4.0 30 5.6 15 8.0 8 11 F5.6 0 Set to [ON] to display the exposure meter when performing Programme Shift, setting aperture, and setting shutter speed. 0 If no operations are performed for a certain period of time, the exposure meter disappears. `[ON]/[OFF] [Focal Length] Displays the focal length on the recording screen during zoom control.
15. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] [ON]/`[OFF] [SET] [Transparency] [Image Select] [Reset at Power Off] Displays recorded pictures by overlapping on the recording screen. [Sheer Overlay] 0 Use [Image Select] to select the pictures to be displayed. Press 21 to select pictures and then press or to confirm.
15. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] `[ON]/[OFF] Displays the level gauge which is useful in correcting camera tilt. [Level Gauge] A Horizontal B Vertical C Green (no tilt) 0 When the camera is not tilted, the level gauge changes to green. 0 Even after correcting the tilt, there may still be an error of approx. n1o. 0 When the camera is tilted significantly upwards or downwards, the level gauge may not be displayed correctly. 0 This menu item can be registered to the Fn button.
15. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] [ON]/`[OFF] [Luminance Spot Meter] [Framing Outline] [Show/Hide Monitor Layout] Specify any spot on the subject to measure the luminance over a small area. 0 For details, refer to page 292. [ON]/`[OFF] Displays the outline for the live view. [Control Panel] `[ON]/[OFF] [Black Screen] `[ON]/[OFF] Displays the control panel and black screen when switching between displays using [DISP.] button.
15. Menu Guide [Custom] menu ¨ [ [Anamorphic Desqueeze Display] [Monitor / Display (Video)] ]/[ ]/[ ]/[ ]/[ ]/`[OFF] This displays the de-squeezed images suited to the magnification of the anamorphic lens on this camera. 0 For details, refer to page 316. [ON]/`[OFF] You can display the recording screen in black and white. 0 If you use the HDMI output during recording, the output [Monochrome Live View] image will not be displayed in black and white.
15. Menu Guide [Custom] menu ¨ [Monitor / Display (Video)] [WAVE]/[VECTOR]/`[OFF] [WFM/Vector Scope] This displays the waveform monitor or the vector scope on the recording screen. 0 For details, refer to page 288. [SMPTE]/[EBU]/[ARIB] [Color Bars] The colour bars are displayed on the recording screen. 0 For details, refer to page 296.
15. Menu Guide [Custom] menu ¨ [IN/OUT] [Info Display] (l 338) `[ON]/[OFF] [HDMI Rec Output] [Down Convert] (l 335) `[AUTO]/[4K/30p]([4K/25p])/ [1080p]/[1080i]/[OFF] [HDMI Recording Control] (l 338) [ON]/`[OFF] [Sound Down Convert] (l 339) [AUTO]/`[OFF] [Sound Output (HDMI)] (l 339) `[ON]/[OFF] Sets HDMI output during recording. `[AUTO1]/[AUTO2]/[NORMAL]/[SLOW] [Fan Mode] [Tally Lamp] 442 Sets fan operation.
15. Menu Guide [Custom] menu ¨ [Lens Focus Resume] [Lens / Others] [ON]/`[OFF] The camera saves the focus position when you turn it off. `[NON-LINEAR]/[LINEAR] [SET] [90°] to [360°] (`[150°])/[Maximum] Sets the amount of movement for focusing using the focus ring. (When using supported lenses) [Focus Ring Control] [NON-LINEAR]: Focus responds by accelerating according to rotation speed of the focus ring. [LINEAR]: Focus responds at a constant amount according to the rotational angle of the focus ring.
15. Menu Guide [Setup] Menu `: Default settings [Setup] menu ¨ [Card/File] [Card Slot 1]/[Card Slot 2] [Card Format] Formats the card (initialisation). 0 For details, refer to page 50. [Recording Method] [Double Card Slot Function] [Folder / File Settings] `[ ]/[ ]/[ ] This sets the way recording to the card slots 1 and 2 is performed. 0 For details, refer to page 92. [Select Folder]/[Create a New Folder]/[File Name Setting] Set the folder and file name where to save the images.
15. Menu Guide [Setup] menu ¨ [Power Save Mode] [Monitor / Display] [Sleep Mode] [10MIN.]/`[5MIN.]/[2MIN.]/[1MIN.]/ [OFF] [Sleep Mode(Wi-Fi)] `[ON]/[OFF] [Auto LVF/Monitor Off] `[5MIN.]/[2MIN.]/[1MIN.]/[OFF] [Power Save LVF Shooting] [Time to Sleep] [Method of Activation] This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time. 0 For details, refer to page 46.
15. Menu Guide [Setup] menu ¨ [Monitor / Display] [Brightness]/[Contrast]/[Saturation]/[Red Tint]/[Blue Tint] This adjusts the brightness, colouring, and red or blue tints of the monitor/viewfinder. [Monitor Settings]/ [Viewfinder] 1 2 Press 34 to select the setting item, and press 21 to adjust. Press or to confirm the setting. 0 It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is in use. `[AUTO]/[j3] to [i3] Adjusts monitor/viewfinder luminance.
15. Menu Guide [Setup] menu ¨ [Monitor / Display] [Character/ Background Color] `[ ]/[ ] Changes the text colour and background colour for the status LCD. [ [ ]: Makes the text white and the background black. ]: Makes the text black and the background white. [Backlight] `[H]/[L]/[OFF] Sets how the status LCD backlight turns on. [Status-LCD] [H]: Brightens the status LCD backlight. [L]: Darkens the status LCD backlight. [OFF]: Turns off the status LCD backlight.
15. Menu Guide [Setup] menu ¨ [Monitor / Display] [Adjust.] [Level Gauge Adjust.] Hold the camera in a horizontal position, and press . The level gauge will be adjusted. or [Level Gauge Value Reset] Restores the default level gauge setting.
15. Menu Guide [Setup] menu ¨ [IN/OUT] [Bluetooth] (l 469) [Send Image (Smartphone)] (l 496) [Remote Wakeup] (l 489) [Returning from Sleep Mode] (l 482) [Auto Transfer] (l 486) [Bluetooth] [Location Logging] (l 488) [Auto Clock Set] (l 490) [Wi-Fi network settings] [Wi-Fi network settings]: Registers the Wi-Fi access point. Wireless access points used to connect the camera to Wi-Fi networks will be registered automatically.
15. Menu Guide [Setup] menu ¨ [IN/OUT] Displays the remaining level and degree of deterioration of the battery. If the usage duration drops significantly even when the battery is fully charged, then the battery is at the end of its service life. Check its status, and replace with a new battery. [Battery Information] [Remaining Level]: Displays the battery remaining level as a percentage (1% units) and as a bar.
15. Menu Guide [Setup] menu ¨ [IN/OUT] [HDMI Mode (Playback)] `[AUTO]/[C4K/60p]/[C4K/50p]/[C4K/ 30p]/[C4K/25p]/[C4K/24p]/[4K/60p]/ [4K/50p]/[4K/30p]/[4K/25p]/[4K/24p]/ [1080p]/[1080i]/[720p]/[576p]/[480p] Sets the HDMI output resolution for playback. [AUTO]: Outputs with a resolution suited to the connected TV. 0 The items you can select depend on the [System Frequency] setting.
15. Menu Guide [Setup] menu ¨ [IN/OUT] [VIERA Link (CEC)] [ON]/`[OFF] You can use the device remote control to operate the camera when it is connected to a VIERA Link compatible device using an HDMI cable. 0 For details, refer to page 525. [Background Color(Playback)] [TV Connection] (Continued) [ ]/`[ ] Sets the colour of the bands displayed on the top and bottom or the left and right of images output on a TV or similar display.
15. Menu Guide [Setup] menu ¨ [Save to Custom Mode] [Setting] [C1]/[C2]/[C3-1] to [C3-10] You can register the currently set information of the camera. 0 For details, refer to page 383. [C1]/[C2]/[C3-1] to [C3-10] [Load Custom Mode] Calls up registered Custom mode settings to the selected recording mode and overwrites the current settings with these. 0 For details, refer to page 386. [Limit No.
15. Menu Guide [Setup] menu ¨ [Clock Set] [Others] Sets the date and time. 0 For details, refer to page 56. Sets the time zone. Press 21 to select the time zone and then press to confirm. [Time Zone] or A Current time B Time difference from GMT (Greenwich Mean Time) 0 If you are using Daylight Savings [ ], press 3. (The time will move forward by 1 hour.) To return to the normal time, press 3 again. [59.94Hz (NTSC)]/`[50.00Hz (PAL)]/[24.
15. Menu Guide [Setup] menu ¨ [Others] This set the language displayed on the screen. [Language] 0 If you set a different language by mistake, select [ ] from the menu icons to set the desired language. [Firmware Update]/[Software info] You can check the firmware versions of the camera and lens. In addition, you can update the firmware, and display information about the camera software. [Firmware Version] [Firmware Update]: Updates firmware. 1 Download the firmware from the site on page 19.
15. Menu Guide [Playback] Menu 0 Images recorded by another device may not be correctly played back or edited with the camera. How to Select an Image(s) in the [Playback] menu Follow the steps below when the image selection screen is displayed. 0 When [Single] and [Multi] are not available, select an image in the same way as when [Single] is selected. 0 Images are displayed separately by card slot. To switch the card to display, press [ ] and select the card slot.
15. Menu Guide `: Default settings [Playback] ¨ [Playback Mode] [Playback Mode] `[Normal Play]/[Picture Only]/[Video Only]/[HLG Only] Filters the type of images to play back. [ALL]/[Picture Only]/[Video Only]/[HLG Only] [Slide Show] Selects image types and plays them back at regular intervals in order. [Start]: Starts slide show playback. [Duration]: Sets repeat playback. [Repeat]: Sets repeat playback. Operations during slide show 3:Plays/pauses.
15. Menu Guide [Playback] ¨ [Playback Mode] [ON]/`[OFF] [Magnify from AF Point] Displays the point focused with AF. Enlarges the AF focus location when enlarging the image. 0 If the image was recorded in [High Resolution Mode] or is out of focus, the centre of the image is enlarged. 0 This menu item can be registered to the Fn button.
15. Menu Guide [Playback] ¨ [Process Image] [RAW Processing] Processes pictures taken in RAW format on the camera and saves them in JPEG format. In addition, RAW images recorded using [HLG Photo] can be saved in HLG format. 0 For details, refer to page 359. [6K/4K PHOTO Bulk Saving] You can save any 5 second period of pictures from a 6K/4K burst file all at once. 0 For details, refer to page 148.
15. Menu Guide [Playback] ¨ [Add/Delete Info.] [Single]/[Multi]/[Cancel] You can set protection for images so that they will not be deleted by mistake. However, if you format the card, the protected images will also be deleted. [Protect] 0 For information about how to select images, refer to page 456. 0 [Cancel] only allows to cancel settings at once for the images in a single card. 0 Be careful because the [Protect] setting may be disabled on a device other than this camera.
15. Menu Guide [Playback] ¨ [Edit Image] [Single]/[Multi] Reduce the picture size of JPEG images and save them as different images to enable them to be easily used for web pages or sent as email attachments. 0 For information about how to select images, refer to page [Resize] 456. – When [Single] is selected, after choosing the image, press 34 to select the size, then press or . – When [Multi] is selected, before choosing the images, press 34 to select the size, then press or .
15. Menu Guide [Playback] ¨ [Edit Image] [Copy Direction] `[ ]/[ ] [Select Copy]/[Copy All in Folder]/[Copy All in Card] You can copy the images in one of the cards to the other card. 0 Copied images will be saved in a new folder. [Copy] [Select Copy]: Copies selected images. 1 Select the folder containing the images to copy. 2 Select the images. (l 456) [Copy All in Folder]: Copies all images in a folder. 1 Select the folder to copy.
15. Menu Guide [Playback] ¨ [Copy] (Continued) [Playback] ¨ [Edit Image] 0 You can set up to 100 images at once with [Select Copy]. 0 The [Protect] setting is not copied. 0 Copying may take a while. 0 AVCHD videos cannot be copied.
15. Menu Guide Entering Characters Follow the steps below when the character entry screen is displayed. 1 Enter characters. ≥Press 3421 to select characters and then press or until the character to enter is displayed. (Repeat this) 0 To repeatedly enter the same character, 2 464 rotate or to the right to move the entry position cursor.
16. Wi-Fi/Bluetooth This chapter explains the Wi-Fi® and Bluetooth® functions of the camera. Remote Operations from a Smartphone You can use the “LUMIX Sync” smartphone app for remote recording and image transfers. l 467 Transferring Images from This Camera You can transfer images to another device, such as a smartphone or PC, by operating the camera. l 492 This document refers to both smartphones and tablets as smartphones.
16. Wi-Fi/Bluetooth 0 Checking operation of the Wi-Fi and Bluetooth functions Operation of the Wi-Fi and Bluetooth functions can be confirmed with the [ ] /[ ] icon on the status LCD. Status LCD Display Monitor Display 0 0 0 0 0 0 466 A The Bluetooth function is set to on, or there is a connection B The Wi-Fi function is set to on, or there is a connection When image data is sent using a camera operation, [ ] on the status LCD blinks and [ ] is displayed on the monitor.
16. Wi-Fi/Bluetooth Connecting to a Smartphone Connect with a smartphone which has the “Panasonic LUMIX Sync” (below: “LUMIX Sync”) smartphone app installed. Use “LUMIX Sync” for remote recording and image transfers. Flow of connecting a smartphone 1 Install “LUMIX Sync” on your smartphone. (l 468) Connect to a network, and install “LUMIX Sync” . Connect to a smartphone. Connect the camera and the smartphone using a method depending on the smartphone.
16. Wi-Fi/Bluetooth Installing “LUMIX Sync” “LUMIX Sync” is an application for smartphones provided by Panasonic. Supported OS 1 2 3 4 Android™: Android 5 or higher iOS: iOS 11 or higher Connect the smartphone to a network. (Android) Select “Google Play™ Store”. (iOS) Select “App Store”. Enter “Panasonic LUMIX Sync” or “LUMIX” into the search box. Select and install the “Panasonic LUMIX Sync ” . 0 Use the latest version. 0 Supported OSs are current as of August 2019 and are subject to change.
16. Wi-Fi/Bluetooth Connecting to a Smartphone (Bluetooth Connection) Follow a simple connection setup procedure (pairing) to connect to a smartphone that supports Bluetooth Low Energy. When pairing is set up, the camera also automatically connects to the smartphone via Wi-Fi. 0 For the first-time connection, pairing settings are required. For information about connecting for the second and subsequent times, refer to page 472. Supported smartphones 1 Android™: Android 5 or higher with Bluetooth 4.
16. Wi-Fi/Bluetooth Operating the camera in accordance with the smartphone guide. 3 Set the camera to Bluetooth pairing standby state. ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Bluetooth] ¨ [SET] ¨ [Pairing] ≥The camera enters pairing standby state and the device name A is displayed. ≥ 4 On the smartphone, select the camera’s device name. 0 (iOS devices) When a message to XXXXXXXXXXXX confirm the change of destination is displayed, select [Join].
16. Wi-Fi/Bluetooth 0 The paired smartphone is registered as a paired device. 0 During Bluetooth connection, [ ] is displayed in the recording screen. When the Bluetooth function is enabled, but a connection is not established with the smartphone, [ ] appears translucent. 0 Up to 16 smartphones can be registered. If you try to register more than 16 smartphones, the registration information will be deleted from the oldest first.
16. Wi-Fi/Bluetooth Connecting to a Paired Smartphone Connect paired smartphones using the following procedure. 1 Enable the Bluetooth function of the camera. 0 ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Bluetooth] ¨ [ON] 2 On the smartphone, start up “LUMIX Sync”. 0 If a message is displayed indicating that the smartphone is searching for cameras, close the message. 3 Select [ ]. 4 Select [Bluetooth Setup]. LUMIX Sync 5 Turn Bluetooth ON. 6 From [Camera registered] items, select the camera’s device name.
16. Wi-Fi/Bluetooth Cancelling Pairing 1 Cancel the pairing setting of the camera. 0 ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Bluetooth] ¨ [SET] ¨ [Delete] 2 Select the smartphone for which to cancel the pairing. 0 Also cancel the pairing setting on the smartphone. 0 When [Reset] in the [Setup] ([Setting]) menu is used to reset the network settings, the information for registered devices is deleted.
16. Wi-Fi/Bluetooth 1 Set the camera to Wi-Fi connection standby status. ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [New Connection] ¨ [Remote Shooting & View] ≥The SSID A of the camera is displayed on the screen. ≥ 0 You can also perform the same operation by pressing the Fn button assigned with [Wi-Fi]. For information about the Fn button, refer to page 367. 2 3 In the setting menu of the smartphone, turn the Wi-Fi function ON. Wi-Fi Wi-Fi Select the SSID displayed on the camera.
16. Wi-Fi/Bluetooth 0 When a device different than the one you want to connect to is displayed, the camera will automatically connect to that device if you select [Yes]. If there are other Wi-Fi connection devices nearby, we recommend using either QR code or manual password input to connect with password authentication. (l 475) Using Password Authentication to Connect You can enhance Wi-Fi connection security by using password authentication through either QR code or manual input.
16. Wi-Fi/Bluetooth 0 (iOS devices) If the Wi-Fi connection fails, follow the message displayed to allow connection to the camera. If you still cannot connect, select the SSID of the camera on the Wi-Fi setup screen of the smartphone to connect. If the SSID is not displayed, turn off and on the camera, then perform the Wi-Fi connection settings again. Manually entering a password to connect 1 Display the screen in Step 2 on page 475.
16. Wi-Fi/Bluetooth Connection Methods Other Than the Default Settings When connecting with [Via Network], or [WPS Connection] in [Direct], follow the steps below: 1 Display the connection method setting screen for the camera. 0 ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [New Connection] ¨ [Remote Shooting & View] 2 Press [DISP.]. Connecting via network 1 2 3 4 Select [Via Network] and then press or . 0 Follow the connection method on page 508 to connect the camera to a wireless access point.
16. Wi-Fi/Bluetooth Terminating the Wi-Fi Connection To end the Wi-Fi connection between the camera and smartphone, follow the steps below. 1 Set the camera to recording mode. ≥Press the shutter button halfway. 2 Terminate the Wi-Fi connection. ≥ ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [Yes] 0 You can also perform the same operation 3 478 by pressing the Fn button assigned with [Wi-Fi]. For information about the Fn button, refer to page 367. On the smartphone, close the “LUMIX Sync”.
16. Wi-Fi/Bluetooth Operating the Camera with a Smartphone This explains the functions for operating the camera from a smartphone. Functions described in this document with the ( Bluetooth ) symbol require a smartphone that supports Bluetooth Low Energy. Home Screen When you start up “LUMIX Sync”, the home screen is displayed. A App settings (l 472, 475, 489) This allows connection settings, camera power operations, and displays Help.
16. Wi-Fi/Bluetooth [Remote shooting] You can use the smartphone to record from a remote location while viewing the live view images from the camera. Getting started: 0 Connect the camera to a smartphone. (l 469, 473) 0 On the smartphone, start up “LUMIX Sync”. 1 Select [ ] ([Remote shooting]) in the home screen. 0 (iOS devices) When a message to confirm the change of destination is displayed, select [Join]. 2 Start recording.
16. Wi-Fi/Bluetooth [Camera] Operation is possible on both the camera and the smartphone. 0 The camera’s dial settings, etc. cannot be changed with the smartphone. [Smartphone] Operation is possible only on the smartphone. 0 The camera’s dial settings, etc. can be changed with the smartphone. 0 To end remote recording, press any of the buttons on the camera to turn on the screen, and select [End]. 0 The default setting is [Camera].
16. Wi-Fi/Bluetooth Bulb Recording The shutter can be kept open from the start to end of recording, which is useful for recording of starry skies or night scenery. Getting started: 0 Set the camera to [M] mode. (l 193) 0 Set the camera shutter speed to [B] (Bulb). (l 195) 1 Touch [ ] to start recording (keep touching, without removing your finger). 2 Remove your finger from [ ] to end recording. ] in the direction of [LOCK] to record with the shutter button locked 0 Slide [ in a fully-pressed state.
16. Wi-Fi/Bluetooth 0 To use the [Shutter Remote Control] to cancel [Sleep Mode] on the camera, set [Bluetooth] in the [Setup] ([IN/OUT]) menu as follows, then connect via Bluetooth: – [Remote Wakeup]: [ON] (l 489) – [Auto Transfer]: [OFF] (l 486) 0 The camera cannot be turned on by using [Shutter Remote Control].
16. Wi-Fi/Bluetooth [Import images] Transfer an image stored on the card to the smartphone connected via Wi-Fi. Getting started: 0 Connect the camera to a smartphone. (l 469, 473) 0 On the smartphone, start up “LUMIX Sync”. 1 2 Select [ ] ([Import images]) in the home screen. 0 (iOS devices) When a message to confirm the change of destination is displayed, select [Join]. Select the image to transfer. 0 You can switch the card displayed by touching A. 3 Transfer the image. ≥Select [ ].
16. Wi-Fi/Bluetooth 0 You will need Android 7.0 or higher to save RAW pictures on an Android device. Depending on the smartphone or the OS, these may not be displayed correctly. 0 When a video is played back, this has a small data size and is transmitted using “LUMIX Sync”, therefore its image quality will differ from that of the actual video recording. Depending on the smartphone and on the usage conditions, the image quality may deteriorate or the sound may skip during video or picture playback.
16. Wi-Fi/Bluetooth [Auto Transfer] Bluetooth You can automatically transfer recorded pictures to a smartphone as they are taken. Getting started: 0 Connect the camera to a smartphone by Bluetooth. (l 469) 1 Enable [Auto Transfer] on the camera. ≥ ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Auto Transfer] ¨ [ON] 0 If a confirmation screen is displayed on 2 the camera asking you to terminate the Wi-Fi connection, select [Yes] to terminate it.
16. Wi-Fi/Bluetooth 4 Record with the camera. 0 This automatically sends the recorded pictures to the specified device as they are taken. ] is displayed in the recording screen of the camera while a file is being sent. 0[ To Stop the Automatic Transfer of Images ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Auto Transfer] ¨ Select [OFF] ≥ A confirmation screen is displayed, asking you to terminate the Wi-Fi connection.
16. Wi-Fi/Bluetooth [Location Logging] Bluetooth The smartphone sends its location information to the camera via Bluetooth, and the camera performs recording while writing the acquired location information. Getting started: 0 Enable the GPS function on the smartphone. 0 Connect the camera to a smartphone by Bluetooth. (l 469) 1 Enable [Location Logging] on the camera.
16. Wi-Fi/Bluetooth [Remote Wakeup] Bluetooth Even when the camera is turned off, the smartphone can be used to start the camera and record images, or check the recorded images. Getting started: 1 Connect to a smartphone using Bluetooth. (l 469) 2 Enable [Remote Wakeup] on the camera. 0 ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Remote Wakeup] ¨ [ON] 3 Set the camera on/off switch to [OFF]. 4 On the smartphone, start up “LUMIX Sync”.
16. Wi-Fi/Bluetooth [Auto Clock Set] Bluetooth Synchronise the clock and the time zone setting of the camera with those of a smartphone. Getting started: 0 Connect the camera to a smartphone by Bluetooth. (l 469) Enable [Auto Clock Set] on the camera.
16. Wi-Fi/Bluetooth [Camera settings copy] Bluetooth This saves the camera’s settings information to the smartphone. Saved settings information can be loaded to the camera, letting you set the same settings on multiple cameras. Getting started: 0 Connect the camera to a smartphone by Bluetooth. (l 469) 1 2 Select [ ] ([Camera settings copy]) in the “LUMIX Sync” home screen. Save or load settings information.
16. Wi-Fi/Bluetooth Sending Images from the Camera Operate the camera to send recorded images to a device connected by Wi-Fi. Operation flow Select the sending method. 1 Select the sending method from the [Send Images While Recording] and [Send Images Stored in the Camera] camera menus. Select the destination (type of the destination device). 2 – – – – – [Smartphone] (l 496) [PC] (l 499) [Cloud Sync.
16. Wi-Fi/Bluetooth Detailed information about connection methods for each destination device is described on pages 496 to 507. Refer to the following pages for the steps common to all devices. – Wi-Fi connections: [Via Network] (l 508)/[Direct] (l 512) – Image send settings (l 515) – Selecting images (l 516) 0 When recording, recording is prioritised so it will take time for sending to complete.
16. Wi-Fi/Bluetooth Images That Can be Sent Images that can be sent differ depending on the destination device. Images that can be sent Destination device [Smartphone] (l 496) [Send Images While Recording] [Send Images Stored in the Camera] JPEG/RAW JPEG/RAW/MP4 [PC] (l 499) JPEG/RAW JPEG/RAW/MP4/ MOV/AVCHD/ 6K/4K burst files/ Post-Focus images [Cloud Sync.
16. Wi-Fi/Bluetooth Fn Button Assigned with [Wi-Fi] You can perform the following operations by pressing the Fn button assigned with [WiFi] after connecting to Wi-Fi. For information on Fn buttons, refer to page 367. [Terminate the Connection] Terminates the Wi-Fi connection. [Change the Destination] Terminates the Wi-Fi connection, and allows you to select a different Wi-Fi connection.
16. Wi-Fi/Bluetooth [Smartphone] Transfer recorded images to a smartphone connected using Wi-Fi. Getting started: 0 Install “LUMIX Sync” on your smartphone. (l 468) 1 Select the method for sending the images on the camera. ≥ 2 3 4 5 6 496 ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [New Connection] ¨ [Send Images While Recording]/[Send Images Stored in the Camera] Set the destination to [Smartphone]. Connect the camera to a smartphone by Wi-Fi.
16. Wi-Fi/Bluetooth 7 When [Send Images While Recording] is selected: Take pictures. 0 This automatically sends the recorded pictures to the specified device as they are taken. ] is displayed in the recording screen of the camera while a file is being sent. 0 To end the connection, follow the steps below: 0[ ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [Yes] When [Send Images Stored in the Camera] is selected: Select an image.
16. Wi-Fi/Bluetooth Sending Images on the Camera to a Smartphone with Simple Operations You can transfer pictures to a smartphone connected by Bluetooth just by pressing the Fn button during playback. You can also use the menu to connect easily. 0 Use the Fn button registered with [Send Image (Smartphone)] to operate. In default settings, this is registered in [Q] button. For information about the Fn button, refer to page 367. Getting started: 0 Install “LUMIX Sync” on your smartphone.
16. Wi-Fi/Bluetooth Using the menu to transfer easily ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Send Image (Smartphone)] Settings: [Single Select]/[Multi Select] 0 If [Single Select], press 21 to select the image and then press or execute. 0 If [Multi Select], use the same operation as with “Send multiple images”. to [PC] Send recorded images to the PC connected with Wi-Fi. Supported OS Windows: Windows 10/Windows 8.1/Windows 8/Windows 7 Mac: OS X v10.5 to v10.11, macOS 10.12 to macOS 10.
16. Wi-Fi/Bluetooth 0 Create a PC account name (up to 254 characters) and password (up to 32 characters) consisting of alphanumeric characters. A destination folder may not be created if the account name includes nonalphanumeric characters. 0 When the computer name (NetBIOS name for Mac) contains a space (blank character), etc., it may not be recognised. In that case, we recommend changing the name to one consisting only of 15 or less alphanumeric characters.
16. Wi-Fi/Bluetooth 4 Enter the computer name of the PC name you want to connect to (for Mac, the NetBIOS name). 0 For information on how to enter characters, refer to page 464. 5 Select a folder for storing images. 0 Folders sorted by sent date will be created in the selected folder, and images will be saved there. 6 7 Check the send settings and then press or . 0 To change the send setting, press [DISP.]. (l 515) When [Send Images While Recording] is selected: Take pictures.
16. Wi-Fi/Bluetooth 0 If the screen for a user account and password entry appears, enter the one you set on your PC. 0 When the firewall of the OS, security software, etc. is enabled, connecting to the PC may not be possible. [Printer] You can send images to a PictBridge (wireless LAN)¢-supported printer connected by Wi-Fi for printing. ¢ DPS over IP standard-compliant 1 Select the method for sending images on the camera.
16. Wi-Fi/Bluetooth 3 Connect the camera to a printer by Wi-Fi. ≥Select [Via Network] (l 508) or [Direct] (l 512), and then connect. 4 5 Select the destination printer. Select and print images. 0 The procedure for selecting images is the same as the one for when the USB connection cable is connected. (l 536) ]. 0 To terminate the connection, press [ 0 For details about PictBridge (wireless LAN-compatible) printers, contact their manufacturers.
16. Wi-Fi/Bluetooth [Web service] You can use “LUMIX CLUB” to upload recorded images to web services such as social networking sites. Getting started: 0 Register with “LUMIX CLUB”. (l 518) 0 Before sending images to a service, register that web service. (l 520) 1 Select the method for sending images on the camera. ≥ 2 3 4 5 504 ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [New Connection] ¨ [Send Images While Recording]/[Send Images Stored in the Camera] Set the destination to [Web service].
16. Wi-Fi/Bluetooth 6 When [Send Images While Recording] is selected: Take pictures. 0 This automatically sends the recorded pictures to the specified service as they are taken. ] is displayed in the recording screen of the camera while a file is being sent. 0 To end the connection, follow the steps below: 0[ ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [Yes] When [Send Images Stored in the Camera] is selected: Select an image.
16. Wi-Fi/Bluetooth [Cloud Sync. Service] This camera can automatically transfer recorded images to a cloud sync service via “LUMIX CLUB” to send them to a PC or smartphone. To use [Cloud Sync. Service] (As of August 2019) 0 You need to register to the “LUMIX CLUB” (l 518) and set up cloud synchronisation to send images to a cloud folder. To set up cloud synchronisation, use “PHOTOfunSTUDIO”. 0 Sent images are temporarily saved in the cloud folder.
16. Wi-Fi/Bluetooth 3 Connect to the cloud sync service. ≥Select [Via Network] and then connect. (l 508) 4 5 Check the send settings and then press or . 0 To change the send settings of images, press [DISP.]. (l 515) When [Send Images While Recording] is selected: Take pictures. 0 This automatically sends the recorded pictures to the cloud sync services as they are taken. ] is displayed in the recording screen of the camera while a file is being sent.
16. Wi-Fi/Bluetooth Wi-Fi Connections When [New Connection] has been selected in [Wi-Fi Function] in [Wi-Fi] of the [Setup] ([IN/OUT]) menu, select the connection method from either [Via Network] or [Direct] to connect. On the other hand, when you use [Select a destination from History] or [Select a destination from Favorite], the camera connects to the selected device with the previously-used settings. [Via Network] Connect the camera and destination device through the wireless access point.
16. Wi-Fi/Bluetooth [WPS (Push-Button)] (l 509) Press the WPS button on the wireless access point to set up a connection. [WPS (PIN code)] (l 510) Enter a PIN code into the wireless access point to set up a connection. [From List] (l 510) Searches for a wireless access point to use, and connects to this. 0 After selecting [Via Network] once, the camera will connect to the previouslyused wireless access point. To change the wireless access point used for connection, press [DISP.
16. Wi-Fi/Bluetooth [WPS (PIN code)] Enter a PIN code into the wireless access point to set up a connection. 1 On the camera screen, select the wireless access point you are connecting to. 2 Enter the PIN code displayed on the camera screen into the wireless access point. or 3 Press of the camera. 0 WPS is a function that allows you to easily configure the settings related to the connection and security of wireless LAN devices.
16. Wi-Fi/Bluetooth Connecting by Manual Input 0 Check the SSID, network authentication, encryption, and encryption key of the wireless access point you are using. 1 In the screen in Step 1 of “[From List]”, select [Manual Input]. (l 510) 2 Enter the SSID of the wireless access point you are connecting to, and then select [Set]. 0 For information on how to enter characters, refer to page 464. 3 Select the network authentication.
16. Wi-Fi/Bluetooth [Direct] Directly connect the camera and the destination device. Select the method for connecting with the destination device. [WPS Connection] [Manual Connection] [WPS (PushButton)] Press the WPS button on the destination device to connect. 0 On the camera, press [DISP.] to extend the connection wait time. [WPS (PIN code)] Enter the PIN code into the camera, and connect. Search for the camera on the destination device to connect.
16. Wi-Fi/Bluetooth Connect to Wi-Fi Using Previously Saved Settings Use the Wi-Fi connection history to connect using the same settings as previously. 1 Display the Wi-Fi connection history. ≥ 2 ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [Select a destination from History]/[Select a destination from Favorite] Select the History item to connect to. 0 Press [DISP.] to confirm details of the connection history.
16. Wi-Fi/Bluetooth Editing Items Registered in Favourite 1 Display items registered to Favourite. 0 ¨[ ]¨[ from Favorite] ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [Select a destination 2 Select the History item to edit in Favourite and then press 1. [Remove from Favorite] — [Change the Order in Favorite] Specify the destination location of the desired item to change the display order.
16. Wi-Fi/Bluetooth Send Settings and Selecting Images Image Send Settings Set the size, file format, and other items for sending the image to the destination device. 1 2 After Wi-Fi connection, the send settings confirmation screen will be displayed, so press [DISP.]. Change the send settings. [Size] Resize the image to send. [Original]/[Auto]/[Change] ([M], [S], or [VGA]) 0 The [Auto] image size changes depending on the status of the destination device.
16. Wi-Fi/Bluetooth Selecting Images When sending by [Send Images Stored in the Camera], select the images using the following procedure. 1 2 Select [Single Select] or [Multi Select]. Select the image. [Single Select] setting 1 Press 21 to select an image. 2 Press or . 6HW [Multi Select] setting 1 Press 3421 to select an image and then press or . (Repeat this) 0 To cancel the setting, press or again. 0 Images are displayed separately by card slot. To switch the card to display, press [ ].
16. Wi-Fi/Bluetooth [Wi-Fi Setup] Menu This configures the settings required for the Wi-Fi function. The settings cannot be changed when connected to Wi-Fi. Displaying the [Wi-Fi Setup] menu. ≥ ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Setup] [Priority of Remote Device] This sets either the camera or the smartphone as the priority control device to be used during remote recording. (l 480) [Wi-Fi Password] You can use a password to connect for enhanced security.
16. Wi-Fi/Bluetooth To prevent incorrect operation and use of the Wi-Fi function by a third party and to protect personal information in the camera and included with images, protect the Wi-Fi function with a password. [Wi-Fi Function Lock] [Network Address] [Setup]: Enter any 4-digit numbers as the password. 0 For information on how to enter characters, refer to page 464. [Cancel]: Cancel the password. 0 Once a password is set, you are required to enter it each time you use the Wi-Fi function.
16. Wi-Fi/Bluetooth Acquire a New Login ID from the Camera From the camera menu, acquire a “LUMIX CLUB” login ID. 1 Follow the menu path. ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Setup] ¨ [LUMIX CLUB] ¨ [Set/Add Account] ¨ [New account] 0 Connect to the network. Proceed to the next page by selecting [Next]. 0 2 Select and set the method for connecting to a wireless access point, and set. (l 508) 0 Except for the first-time connection, the camera will connect to the previouslyused wireless access point.
16. Wi-Fi/Bluetooth Register a Web Service with “LUMIX CLUB” 0 Confirm web services supported by “LUMIX CLUB” in “FAQ/Contact us” at the following site: https://lumixclub.panasonic.net/eng/c/lumix_faqs/ Getting started: 0 Make sure that you have created an account on the web service you want to use, and have the login information available. 1 Connect to the “LUMIX CLUB” site using a smartphone or PC. https://lumixclub.panasonic.net/eng/c/ 2 Enter your “LUMIX CLUB” login ID and password to log in.
16. Wi-Fi/Bluetooth 3 Enter the login ID or password. 0 For information on how to enter characters, refer to page 464. 4 Select [Exit]. Checking the “LUMIX CLUB” Terms of Use Check the details if the terms of use have been updated, for example. ¨[ ]¨[ [Terms of use] ] ¨ [Wi-Fi] ¨ [Wi-Fi Setup] ¨ [LUMIX CLUB] ¨ Select Deleting Your Login ID and Closing Your “LUMIX CLUB” Account Delete the login ID from the camera when transferring it to another party or disposing of it.
17. Connecting to Other Devices This chapter describes connections with other devices, such as TVs and PCs. Connect using either the [HDMI] socket or the USB port on the camera. Refer to the sections below for more details about connections. [HDMI] socket Connect the camera and TV with a commercially available HDMI cable. 0 Check the direction of the terminals and plug in/out straight holding onto the plug.
17. Connecting to Other Devices 0 Plug in/out straight holding onto the plug. (Inserting these at an angle may cause deformation or malfunction) 0 Do not use any other USB connection cables except the supplied USB connection cables (C–C and A–C). 0 Do not connect the cable to the wrong terminals. This may cause a malfunction.
17. Connecting to Other Devices Viewing on a TV You can connect the camera to a TV to view recorded pictures and videos on the TV. Getting started: 0 Turn off the camera and TV. 1 2 3 4 5 524 Connect the camera and TV with a commercially available HDMI cable. (l 522) Turn on the TV. Switch the input of the TV. ≥Switch the input of the TV to match the terminal to which you connected the HDMI cable. Turn on the camera. Display the playback screen. ≥Press [(]. ≥The recorded images are displayed on the TV.
17. Connecting to Other Devices 0 With the default settings, pictures are output at the optimal resolution for the connected TV. The output resolution can be changed in [HDMI Mode (Playback)]. (l 451) 0 Depending on the aspect ratio, grey bands may be displayed on the top and bottom or the left and right of images. You can change the band colour in [Background Color(Playback)] in [TV Connection] of the [Setup] ([IN/OUT]) menu.
17. Connecting to Other Devices 1 Connect the camera to a Panasonic TV compatible with VIERA Link using a commercially available HDMI cable. (l 522) 2 Turn on the camera. 3 Turn on the VIERA Link. 0 ¨[ ]¨[ ] ¨ [TV Connection] ¨ [VIERA Link (CEC)] ¨ [ON] 4 Display the playback screen. 0 Press [(]. 5 Operate with the remote control for the TV. Power off link If you turn off the TV with its remote control, the camera will also turn off.
17. Connecting to Other Devices Importing Images to a PC If you connect the camera to a PC, you can copy the recorded images to the PC. When using Windows, you can also copy using the “PHOTOfunSTUDIO” software for LUMIX. You can also use software to perform operations such as organising and correcting recorded images, processing RAW images, and editing videos. (l 529) Copying Images to a PC After connecting to the PC, you can copy the recorded images by dragging files and folders on this camera to the PC.
17. Connecting to Other Devices Getting started: 0 Turn on the camera and PC. 1 Connect the camera and PC with the USB connection cable (C–C or A–C). (l 522) 2 Press 34 to select [PC(Storage)] and then press . or ≥Windows: A drive (“LUMIX”) is displayed in [This PC]. ≥Mac: A drive (“LUMIX”) is displayed on the desktop. 0 A message about charging may be displayed. Wait for a while until the message disappears. 3 Drag the files and folders from the camera to the PC.
17. Connecting to Other Devices Copying Images to a PC Using “ PHOTOfunSTUDIO” Getting started: 0 Turn on the camera and PC. 0 Install “PHOTOfunSTUDIO” on PC. (l 529) 1 Connect the camera and PC with the USB connection cable (C–C or A–C). (l 522) 2 Press 34 to select [PC(Storage)] and then press or . 0 A message about charging may be displayed. Wait for a while until the message disappears. 3 Copy images to the PC using “PHOTOfunSTUDIO”.
17. Connecting to Other Devices PHOTOfunSTUDIO 10.1 PE This software allows you to manage your images. For example, it allows you to import pictures and videos to your PC and then sort them by recording date, model name. You can also perform operations such as writing images to a DVD, correcting images, and editing videos. Check the following site and then download and install the software: https://panasonic.jp/support/global/cs/soft/download/d_pfs101pe.
17. Connecting to Other Devices SILKYPIX Developer Studio SE This software processes and edits RAW images. Edited images can be saved in a format (JPEG, TIFF, etc.) that can be displayed on a PC. Check the following site and then download and install the software: http://www.isl.co.jp/SILKYPIX/english/p/ Operating environment Windows Windows 10 (64-bit recommended) Windows 8.1 (64-bit recommended) Windows 7 (64-bit recommended) Mac OS X v10.10 to v10.11 macOS 10.12 to macOS 10.
17. Connecting to Other Devices Storing on a Recorder By connecting the camera to a Panasonic Blu-ray disc recorder or DVD recorder, you can store the pictures and videos. Getting started: 0 Turn on the camera and recorder. 0 Insert a card into card slot 1. 1 2 Connect the camera and recorder with the USB connection cable (C–C or A–C). (l 522) Press 34 to select [PC(Storage)] and then press . or 0 A message about charging may be displayed. Wait for a while until the 3 message disappears.
17. Connecting to Other Devices Tethered Recording If you install the “LUMIX Tether” camera control software on your PC, you can connect the camera to the PC via USB and then control the camera from the PC and record while checking the live view on the PC screen (tethered recording). In addition, you can output via HDMI to an external monitor or TV during tethered recording. Installing Software “ LUMIX Tether” This software is for controlling the camera from a PC.
17. Connecting to Other Devices Operating the Camera from a PC 0 To output via HDMI to an external monitor or TV, connect the camera with an HDMI cable. (l 524) Getting started: 0 Turn on the camera and PC. 0 Install “LUMIX Tether” on PC. 1 2 Connect the camera and PC with the USB connection cable (C–C or A–C). (l 522) Press 34 to select [PC(Tether)] and then press . ≥[ or ] is displayed on the camera’s screen. 0 A message about charging may be displayed.
17. Connecting to Other Devices Printing If you connect the camera to a printer that supports PictBridge, you can select pictures on the camera’s monitor and then print them. Getting started: 0 Turn on the camera and printer. 0 Set the print quality and other settings on the printer. 1 Display the playback screen. ≥Press [(]. 0 Images are displayed separately by card 2 3 slot. To switch the card to display, after pressing [ ], press 34 to select [Card Slot 1] or [Card Slot 2], and then press or .
17. Connecting to Other Devices 4 Press 21 to select a picture and then press or . PictBridge ≥To print multiple pictures, press 3, set the picture selection method, and then select pictures. 0XOWL 3ULQW 3ULQW [Multi Select] Selects the picture to print. 1 Press 3421 to select a picture and then press or . 2 [Select All] [Rating] 0 To cancel the setting, press Press [DISP.] to end selection. again. Prints all the stored pictures. Prints all pictures with [Rating] levels from [¿1] to [¿5].
17. Connecting to Other Devices Setting Items (Print Settings) [Print start] Starts printing. Sets printing with date. [Print with Date] 0 If the printer does not support printing with date, the date cannot be printed. [Num.of prints] [Paper Size] [Page Layout] Sets the number of prints to be printed (up to 999). Sets the paper size. Sets whether to add borders and how many images to be printed on each sheet of paper.
17. Connecting to Other Devices 0 If [USB Mode] is set to [PictBridge(PTP)] in the [Setup] ([IN/OUT]) menu, the camera will be automatically connected to the printer without the [USB Mode] selection screen being displayed. (l 449) 0 Take care not to turn off the camera while printing is in progress. 0 When connecting with the printer is not possible, set [USB Power Supply] to [OFF] and then try connecting again.
18. Materials Using Optional Accessories 0 For information on the external flash, refer to page 228. 0 For information on the external microphone, refer to page 340. 0 For information on the XLR Microphone Adaptor, refer to page 343. 0 Some optional accessories may not be available in some countries. Battery Grip (Optional) When mounted on the camera, the Battery Grip (DMW-BGS1: optional) improves ease of operation and grip when the camera is held vertically.
18. Materials Getting started: 0 Turn the camera off, and remove the cover for the battery grip connector. 1 Attach the Battery Grip to the camera. 2 Turn on the camera. 3 Set the battery use priority. 0 ¨[ [BODY] [BG] ]¨[ ] ¨ [Battery Use Priority] The battery in the camera is used first. The battery in the Battery Grip is used first. 0 When the battery in the Battery Grip is used, [ ] is displayed on the monitor. 0 You can register functions of your choice to the [Fn] button on the Battery Grip.
18. Materials Registering Functions to the Video Rec. Button You can register a favourite function to the video rec. button on a Shutter Remote Control. The functions that can be registered are the same as the functions that can be registered to the Fn buttons for recording (l 371). [Video Record] is registered in the default setting. ¨[ ]¨[ ] ¨ Select [Video Rec. Button (Remote)] 0 Register functions using the same operations as [Fn Button Set].
18. Materials Monitor/Viewfinder Displays 0 The screen is an monitor display example of when [LVF/Monitor Disp. Set] is set to [ ]. Recording Screen BKT HLG 4K AWB RAW + FINE L AFS GPS S35mm Fn3 Fn4 MINI Fn5 Fn6 OFF 24m59s AEL BKT 60 F4.
18.
18. Materials 5 2019.12. 1 10:00:00 ¥ Focus (turns green) (l 61)/ Recording state (turns red) (l 223, 242) LOW Focus (in low light AF situations) (l 98) STAR Focus (Starlight AF) (l 98) Flash adjustment (l 235) Recording mode (l 63) Programme Shift (l 187) Metering mode (l 185) AE AEL AE Lock (l 199) 60 Shutter speed (l 61) F4.0 Aperture value (l 61) BKT F4.
18.
18. Materials Control Panel 1/60 F4.0 ISO 0 100 0 AFS FINE 0 3:2 AWB 1 Fn 999 999 3 Recording mode (l 63) 1/60 Shutter speed (l 61) F4.
18. Materials 4 Photo Style (l 210) AWB White balance (l 204) i.
18. Materials Control Panel ([ ] Mode) FPS SHUTTER 50 11 3 MOV 420/8-L FHD 50.00p FULL TC NDF F4.0 00:00:00:00 -24 -12 -6 50 AUTO ISO 100 -2 -6 PHOTO STYLE Shutter speed (l 61) IRIS Aperture value (l 61) F4.
18.
18. Materials Playback Screen 2019.12.1 10:00 100-0001 3 1/999 8m30s GPS 60 F4.0 ±0 FINE L ISO100 1 2 Playback mode (l 457) 2019.12.
18. Materials 3 Playback (video) (l 349) Group images (l 356) Time code (l 268) 96kHz/24bit XLR microphone adaptor setting (l 343) MOV FHD 420/8-L Recording file format (l 255)/ Recording quality (l 255) 50.00p Frame rate (l 255)/ 25/50.
18. Materials Detailed information display 1/5 AFS 3:2 L ISO 100 STD. 0 Photo Style display 1 5500 ISO F4.0 60 3/5 FINE sRGB 100 0 2019.12. 1 10:00 2019.12. 1 10:00 100-0001 1 2 3 4 5 0 F4.0 60 100-0001 White balance display Card slot (l 48) Recording date and time (l 56) Folder/file number (l 528) Recording information (basic) Recording information (advanced) 4/5 1 5500K ISO 100 0 G A B F4.0 60 M 2019.12.
18. Materials Message Displays Meanings of main messages displayed on the camera screen, and response methods. Card [Memory Card Error]/[Format this card?] 0 It is a format that cannot be used with the camera. Either insert another card, or back up any necessary data before formatting. (l 50) [Memory Card Error]/[This memory card cannot be used] 0 Use a card compatible with the camera. (l 25) [Insert memory card again.]/[Try another card] 0 Unable to access the card. Reinsert the card.
18. Materials [Recording was cancelled due to the limitation of the writing speed of the card] 0 Insufficient card write speed for video, 6K/4K photo, or Post-Focus recording. Use a card of a supported Speed Class. (l 26) 0 If the recording stops even when you are using a card that meets the specified Speed Class rating, the data writing speed of the card is getting slow. We recommend backing up data, and formatting (l 50). 0 Depending on the type of card, recording may stop part way.
18. Materials Wi-Fi [Failed to connect wireless access point]/[Connection failed]/[No destination found] 0 The wireless access point information set on the camera is wrong. Check the authentication type and encryption key. (l 511) 0 Radio waves from other devices may block the connection to a wireless access point. Check the status of other devices that are connected to the wireless access point as well as the status of other wireless devices. [Connection failed. Please retry in a few minutes.
18. Materials [Please turn camera off and then on again]/[System Error] 0 Turn off and on the camera. If the message is displayed even when doing this several times, contact the dealer. [The fan is not functioning correctly.] 0 The fan has stopped. Turn off and on the camera. If the fan does not work after turning the camera off and then on again, consult the dealer. 0 The temperature of the camera will rise if you continue to use the camera with the fan stopped. Do not use over long periods of time.
18. Materials Troubleshooting First, try out the following procedures (l 557 to 568). If the problem is not resolved, it may be improved by selecting [Reset] (l 80) on the [Setup] ([Setting]) menu. Power, Battery The camera turns off automatically. 0 [Power Save Mode] is enabled. (l 46) The battery becomes flat too quickly. 0 When [6K/4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains faster. Set these settings only when recording. 0 When connected to Wi-Fi, the battery drains quickly.
18. Materials Cannot record images. The shutter will not operate immediately when the shutter button is pressed. 0 If [Focus/Shutter Priority] is set to [FOCUS], then recording will not take place until focus is achieved. (l 421) The recorded image is whitish. 0 Images may look whitish when the lens or image sensor gets dirty with fingerprints or similar. If the lens is dirty, turn the camera off, then wipe the lens surface with a soft, dry cloth.
18. Materials The recorded image looks rough. Noise appears on the picture. 0 Try the following: – Reduce the ISO sensitivity. (l 200) – Increase [Noise Reduction] of [Photo Style] to the positive direction, or adjust each item other than [Noise Reduction] to the negative direction. (l 213) – Set [Long Exposure NR] to [ON]. (l 397) The subject appears distorted on the image. 0 When a moving subject is recorded while using the following functions, the subject may appear distorted in the picture: – [ELEC.
18. Materials Stripes appear in high ISO sensitivity. 0 Stripes may appear in high ISO sensitivity or depending on the lens you use. Decrease the ISO sensitivity. (l 200) The brightness or colouring of the recorded image is different from the actual scene. 0 When recording under lighting such as fluorescent or LED lighting, increasing the shutter speed may introduce slight changes to brightness or colouring. These are a result of the characteristics of the light source and do not indicate a malfunction.
18. Materials Video Cannot record videos. 0 If you change the [System Frequency], you may no longer be able to record video to the same card. Try again after either returning the [System Frequency] to the original setting or inserting another card. 0 When using a large capacity card, you may not be able to record for a while after turning on the camera. Video recording stops in the middle. 0 Recording video requires a card of a supported speed class. Use a compatible card.
18. Materials Playback Cannot play back. There are no recorded pictures. 0 Folders and images processed on a PC cannot be played on the camera. We recommend using the software “PHOTOfunSTUDIO” to write images from the PC to the card. 0 Some images are not displayed when the [Playback Mode] is set. Set to [Normal Play]. (l 457) 0 Videos recorded with a different [System Frequency] setting cannot be played back. Return the [System Frequency] setting to the one you used during the recording.
18. Materials Cannot switch between the monitor and viewfinder even when [LVF] is pressed. 0 When the camera is connected to a PC or printer, it is not possible to switch to the viewfinder display. Unevenly bright parts or irregular colours appear on the viewfinder. 0 The viewfinder of the camera is built with OLED components. Screen burn-in may occur on the screen/viewfinder when a same image is displayed for a long period of time, but it does not affect the recorded images.
18. Materials Wi-Fi Function A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed. General tips for using a Wi-Fi connection 0 Use within the communication range of the device to be connected. 0 Usage near devices that utilise the 2.4 GHz frequency such as microwave ovens and cordless telephones may result in the radio wave being lost. Use the camera at a sufficient distance from these devices.
18. Materials When trying to connect to a PC by Wi-Fi, this does not recognise the user name and password, and connection is not possible. 0 Depending on the version of the OS, there are two types of user account (local account/Microsoft account). Ensure you use the local account user name and password. The PC is not recognised when I use a Wi-Fi connection. The camera cannot be connected to the PC using the Wi-Fi function.
18. Materials I have forgotten the password for the Wi-Fi. 0 In the [Setup] ([Setting]) menu, [Reset], reset network settings. (l 80) However, all information set in [Wi-Fi Setup] and [Bluetooth] will also be reset. (With the exception of [LUMIX CLUB]) TV, PC, Printer No image on the TV. The TV screen is blurry or not coloured. 0 Confirm the connection with the TV. (l 524) 0 Set the TV input to HDMI input. The TV images are displayed with grey bands.
18. Materials Cannot print when the camera is connected to a printer. 0 Pictures cannot be printed using a printer that does not support PictBridge. 0 Set the camera’s [USB Mode] to [PictBridge(PTP)]. (l 449) The ends of the images are cut at printing. 0 If the printer has trimming or borderless printing functions, cancel these settings before printing. (Refer to the operating instructions for your printer.
18. Materials The camera makes a noise when it is turned on. 0 This is the noise of the dust reduction function working (l 571); it is not a malfunction. There is rattling noise from the lens when the camera is turned on or off, or when the camera is swung. There is a sound from the lens when recording. 0 This is the sound of the lens moving and aperture operation. It is not a malfunction. A red light sometimes turns on when the shutter button is pressed halfway.
18. Materials Cautions for Use The camera Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). 0 If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. 0 Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
18. Materials Do not spray the camera with insecticides or volatile chemicals. 0 If the camera is sprayed with such chemicals, the body of the camera may be damaged and the surface finish may peel off. Do not keep products made of rubber, PVC or similar materials in contact with the camera for a long period of time.
18. Materials Cleaning Before cleaning the camera, remove the battery or the DC Coupler, and disconnect the power plug from the electrical outlet. Then wipe the camera with a dry, soft cloth. 0 When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth, and then with a dry cloth. 0 Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the camera, since it may deteriorate the external case or the coating may peel off.
18. Materials Removing dirt on the image sensor The image sensor is very precise and delicate, so be sure to observe the following when you do have to clean it yourself. 0 Blow dust off the surface of the image sensor using a commercially available blower. Do not blow the dust off with excessive power. 0 Do not put the blower brush further inside than the lens mount. 0 Do not let the blower brush touch the image sensor as the image sensor may get scratched.
18. Materials Monitor/Viewfinder 0 Do not push hard on the monitor. This may cause irregular colouration or malfunction. 0 Extremely high precision technology is employed to produce the monitor/viewfinder screen. However there may be some dark or bright spots, or spots that light constantly (red, blue, or green) on the screen. This is not a malfunction. Though the monitor/viewfinder screen parts are produced with highly controlled precision technology, some pixels may be inactive or always lit.
18. Materials Charger, AC Adaptor 0 The [CHARGE] light may blink under the influence of static electricity or electromagnetic wave, depending on the charging environment. This phenomenon has no effects on charging. 0 If you use the battery charger near a radio, the radio reception may be disturbed. Keep the charger 1 m (3.3 feet) or more away from radio. 0 During usage, the AC adaptor may emit an electrical hum; this is not a malfunction.
18. Materials Personal Information Personal information is stored within the camera and in recorded images. We recommend that you enhance security by setting a Wi-Fi password and Wi-Fi function lock to protect personal information. (l 517, 518) Disclaimer 0 Information including personal information may be altered or vanish due to erroneous operation, effect of static electricity, accident, malfunction, repair, or other handlings.
18. Materials When Not Using the Camera for a Long Period of Time 0 Ensure you remove the battery and card from the camera. When the battery is left inserted in the camera, a small amount of current will always flow even if the camera is turned off. If the battery is left in the camera, it may over-discharge, and be rendered unusable even after charging. 0 Store the battery in a cool and dry place with a relatively stable temperature.
18. Materials Shoulder Strap 0 If you attach a heavy interchangeable lens to the camera body, do not carry the camera by the shoulder strap. Hold the camera and the lens when carrying them. Wi-Fi Function Use the camera as a wireless LAN device When using devices or computer systems that require more reliable security than wireless LAN devices, ensure that the appropriate measures are taken for safety designs and defects for the systems used.
18. Materials Do not connect to the wireless network you are not authorised to use When the camera utilises its wireless LAN function, wireless networks will be searched automatically. When this happens, wireless networks that you are not authorised to use (SSID¢) may be displayed, however do not attempt to connect to the network as it may be considered as unauthorised access. ¢ SSID refers to the name that is used to identify a network over a wireless LAN connection.
18. Materials Number of Pictures That Can Be Taken and Available Recording Time with the Battery Listed below are the numbers of pictures that can be taken and the time lengths available for recording when the supplied battery is being used. 0 The number of pictures that can be taken is according to the CIPA (Camera & Imaging Products Association) standards. 0 Using a Panasonic SDHC memory card. 0 Using the interchangeable lens (S-R24105). 0 The values listed are approximate.
18. Materials Recording Videos (When Using the Monitor) [Rec. File Format] [AVCHD] [MP4] [MOV] Continuous available Actual available recording time (minutes) recording time (minutes) [Rec Quality] [Image Area of Video] [Image Area of Video] [FULL] [S35mm] [FULL] [S35mm] [FHD/17M/60i] [FHD/17M/50i] 160 140 80 70 [4K/10bit/100M/60p] [4K/10bit/100M/50p] — 120 — 60 [4K/8bit/100M/30p] [4K/8bit/100M/25p] 140 130 70 65 [FHD/8bit/28M/60p] [FHD/8bit/28M/50p] 160 140 80 70 [5.
18. Materials Playback (When Using the Monitor) Playback time (minutes) 270 0 The number of pictures that can be taken and the available recording time vary depending on the surrounding environment and the usage conditions. For example, these will reduce in the following case: – In low-temperature environments, such as on ski slopes. 0 If the usage duration drops significantly even when the battery is fully charged, then the battery is at the end of its service life.
18. Materials Number of Still Images That Can Be Taken and Video Recording Time with Cards Listed below are the numbers of pictures and the time lengths of videos that can be recorded on a card. 0 The values listed are approximate. Number of Still Images That Can Be Taken 0 [Aspect Ratio]: [3:2]; [Picture Quality]: [FINE] [Picture Size] Card capacity 32 GB 64 GB [L] (24M) 2470 4940 128 GB 9780 [M] (12M) 4520 8980 17790 [S] (6M) 7950 15440 30580 [Full-Res.
18. Materials Video Recording Time 0 “h” is an abbreviation for hour, “m” for minute and “s” for second. 0 Video recording time is the total time of all the videos which have been recorded. 0 [Rec. File Format]: [AVCHD] [System Frequency]: [59.94Hz (NTSC)] [Rec Quality] Card capacity 32 GB 64 GB [FHD/28M/60p] 2h25m 5h00m 128 GB 9h55m [FHD/17M/60i] 4h05m 8h10m 16h20m [FHD/24M/30p]/[FHD/24M/24p] 2h50m 5h45m 11h35m [System Frequency]: [50.
18. Materials [System Frequency]: [50.00Hz (PAL)] [Rec Quality] Card capacity 32 GB 64 GB 128 GB [4K/10bit/100M/50p]/[4K/8bit/100M/25p] 41m00s 1h25m 2h45m [4K/10bit/72M/25p] 58m00s 1h55m 3h55m [FHD/8bit/28M/50p] 2h25m 4h55m 9h45m [FHD/8bit/20M/25p] 3h15m 6h30m 13h00m 0 [Rec. File Format]: [MOV] [System Frequency]: [59.
18. Materials [System Frequency]: [50.00Hz (PAL)] [Rec Quality] Card capacity 32 GB 64 GB 128 GB [4K-A/25p/422/10-I]/[C4K/25p/422/10-I]/ [4K/25p/422/10-I] 10m00s 21m00s 42m00s [5.9K/25p/420/10-L]/[5.
18. Materials 0 Depending on the recording conditions and the type of card, number of still images that can be taken, video recording time vary. 0 [9999+] is displayed on the recording screen and status LCD if the remaining number of still images that can be taken is 10000 or more. 0 The continuous recordable time for videos is displayed on the screen.
18.
18. Materials Menu [Photo]: Default setting [Focus] [AF Custom Setting(Photo)] [Set 1] 3 3 3 [AF Assist Light] [ON] 3 3 3 [ON]/[OFF] [ON] 3 3 3 [SET] — 3 3 3 [FAST] 3 3 3 [Flash Mode] [‰] 3 3 3 [Firing Mode] [TTL] 3 3 3 [Flash Adjust.] [±0 EV] 3 3 3 [Flash Synchro] [1ST] 3 3 3 [Manual Flash Adjust.] [1/1] 3 3 3 [Auto Exposure Comp.
18. Materials Menu Default setting [Burst Shot 1 Setting] [H] [Burst Shot 2 Setting] [ [Shutter Type] 3 3 3 3 3 3 [MECH.] 3 3 3 [Shutter Delay] [OFF] 3 3 3 [Ex. Tele Conv.
18. Materials Menu Default setting [Flicker Decrease (Video)] [OFF] 3 3 3 [Master Pedestal Level] [0] 3 3 3 [SS/Gain Operation] [SEC/ISO] 3 3 3 [i.Dynamic Range] [OFF] 3 3 3 [Vignetting Comp.] [ON] 3 3 3 [Diffraction Compensation] [OFF] 3 3 3 [OFF] 3 3 3 [Simultaneous Record w/o [OFF] Filter] 3 3 3 3 3 3 3 3 3 3 3 3 [Filter Effect] [Filter Settings] [Video]: [Image Format] [Rec. File Format] [Image Area of Video] When [System Frequency] is set to [59.
18. Materials Menu [Time Code] Default setting [Time Code Display] [OFF] 3 3 3 [Count Up] [REC RUN] 3 3 3 [Time Code Value] — [Time Code Mode] [DF] 3 3 3 [HDMI Time Code Output] [OFF] 3 3 3 [External TC Setting] — 3 3 3 [16-255] 3 3 3 [ON]/[OFF] [OFF] 3 3 3 [SET] — 3 3 3 [Continuous AF] [MODE1] 3 3 3 [AF Assist Light] [ON] 3 3 3 [ON]/[OFF] [ON] 3 3 3 [SET] — 3 3 3 [FAST] 3 3 3 [Sound Rec Level Disp.
18. Materials Menu [Video]: [Silent Mode] [Image Stabilizer] Default setting [Others (Video)] [OFF] 3 3 3 [Operation Mode] [ ] 3 3 3 [Body(B.I.S.) / Lens(O.I.S.)] [ ] 3 3 3 [When to Activate] [HALF-SHUTTER] 3 3 3 [E-Stabilization (Video)] [OFF] 3 3 3 [Boost I.S.
18. Materials Menu Default setting [Color Space] [sRGB] 3 [Exposure Comp. Reset] [OFF] 3 [Auto Exposure in P/A/S/M] [ON] 3 3 3 [CreativeVideo Combined Set.] [Custom]: 3 3 3 [F/SS/ISO/Exposure Comp.
18.
18. Materials Menu [Dial Set.] Default setting [Assign Dial (F/SS)] [SET1] [Rotation (F/SS)] [ [Control Dial Assignment] [ 3 3 3 3 3 3 ] 3 3 3 [Exposure Comp.] [OFF] 3 3 3 [Dial Operation Switch Setup] — 3 3 3 [Rotation (Menu Operation)] [ 3 3 3 ] ] [Joystick Setting] [D.FOCUS Movement] 3 3 3 [Illuminated Button] [ON2] 3 3 3 [Video Rec.
18. Materials Menu Default setting [Expo.Meter] [OFF] 3 3 3 [Focal Length] [ON] 3 3 3 [Blinking Highlights] [OFF] 3 3 3 [OFF] 3 [Sheer Overlay] [ON]/[OFF] — 3 [I.S.
18.
18. Materials Menu Default setting [Monitor Frame Rate] [60fps] 3 3 [LVF Frame Rate] [60fps] 3 3 [Monitor Settings]/[Viewfinder] — 3 [Monitor Backlight]/[LVF Luminance] [AUTO] [Remaining Battery Level] [ [Status-LCD] [Eye Sensor] [Level Gauge Adjust.] [Setup]: 3 3 3 3 3 3 3 3 [Display While Power Off] [ON] 3 3 [Sensitivity] [HIGH] 3 3 [LVF/Monitor Switch] [LVF/MON AUTO] 3 3 [Adjust.
18. Materials Menu [HDMI Mode (Playback)] [TV Connection] Default setting [AUTO] 3 3 [LUT View Assist (HDMI)] [OFF] 3 3 [HLG View Assist (HDMI)] [AUTO] 3 3 [VIERA Link (CEC)] [OFF] 3 3 [Background Color(Playback)] [ 3 3 [Photo Luminance Level] ] 3 [16-255] 3 3 [ON] 3 3 [Save to Custom Mode] — 3 3 [Load Custom Mode] — 3 3 [Limit No.
18. Materials Menu [Firmware Version] [Online Manual] [My Menu]: Default setting — — [Edit My Menu] [Add] — [Sorting] — [Delete] — 3 3 [OFF] 3 3 [Playback Mode] [Normal Play] 3 3 [Slide Show] — 3 3 [Rotate Disp.
18.
18. Materials Menu [Focus Peaking] iA P A S M [ON]/[OFF] 3 3 3 3 3 [SET] 3 3 3 3 3 3 3 3 3 3 [1-Area AF Moving Speed] [Photo]: [Flash] [Flash Mode] 3 3 3 3 [Firing Mode] 3 3 3 3 [Flash Adjust.] 3 3 3 3 [Flash Synchro] 3 3 3 3 [Manual Flash Adjust.] 3 3 3 3 [Auto Exposure Comp.
18. Materials iA P A S M [Burst Shot 1 Setting] Menu 3 3 3 3 3 [Burst Shot 2 Setting] 3 3 3 3 3 [Shutter Type] 3 3 3 3 3 [Shutter Delay] 3 3 3 3 3 [Ex. Tele Conv.
18. Materials P A S M [Vignetting Comp.] Menu 3 3 3 3 3 [Diffraction Compensation] 3 3 3 3 3 [Filter Effect] 3 3 3 3 3 [Simultaneous Record w/o Filter] 3 3 3 3 [Filter Settings] [Video]: iA [Image Format] [Rec.
18. Materials Menu iA P A S M [Sound Rec Level Disp.] 3 3 3 3 3 3 [Mute Sound Input] 3 3 3 3 3 3 [Sound Rec Gain Level] 3 3 3 3 3 3 [Sound Rec Level Adj.] 3 3 3 3 3 3 [Sound Rec Level Limiter] 3 3 3 3 3 3 [Wind Noise Canceller] 3 3 3 3 3 3 [Wind Cut] 3 3 3 3 3 3 [Mic Socket] 3 3 3 3 3 3 [Special Mic.
18. Materials Specifications The specifications are subject to change for performance enhancement. Digital camera body (DC-S1H): Information for your safety Power source: Power consumption: 9.0 V 6.3 W (when recording with the monitor), 4.
18. Materials Recording format for still images File format for still images JPEG (DCF compliant, Exif 2.31 compliant) / RAW / HLG photo (CTA-2072 compliant) File format for 6K/4K 6K photo: MP4 (H.265/HEVC, AAC (2ch)) photos 4K photo: MP4 (H.
18. Materials Picture size (pixels) When the aspect ratio setting is [1:1] [L]: 4000k4000 (2656k2656)¢ [M]: 2848k2848 (1920k1920)¢ [S]: 2016k2016 (1376k1376)¢ [High Resolution Mode]: 8000k8000 4K photo: 2880k2880 (2880k2880)¢ [HLG Photo] ([Full-Res.]): 4000k4000 [HLG Photo] ([4K-Res.
18. Materials Viewfinder System Aspect ratio 4:3, 0.5 inches, approx. 5,760,000 dots, organic EL (OLED) live view viewfinder Field of view ratio Approx. 100% Magnification Approx. 0.78k (j1.0 mj1 50 mm at infinity, with aspect ratio set to [3:2]) Eye point Approx. 21 mm (at j1.0 mj1) Dioptre adjustment range j4.0 to i2.0 dioptre Eye sensor Yes Monitor System Aspect ratio 3:2, 3.2 inches, approx. 2,330,000 dots monitor, capacitive touch screen Field of view ratio Approx. 100% Status LCD 1.
18. Materials Exposure control Light metering 1728-zone metering, multi-metering / centre-weighted system, metering / spot metering / highlight-weighted metering Light metering mode Metering range EV 0 to EV 18 (F2.
18. Materials Dual Native ISO setting (Cinelike D2/ Auto Cinelike V2) Low sens. High sens. Dual Native ISO setting (HLG video/ HLG photo) Auto Low sens. High sens.
18. Materials Shutter Format Shutter speed Burst recording Mechanical shutter/ Electronic front curtain Focal-plane shutter Pictures: Mechanical shutter: Bulb (max. approx. 30 minutes), 60 seconds to 1/8000 of a second Electronic front curtain: Bulb (max. approx. 30 minutes), 60 seconds to 1/2000 of a second Electronic shutter: Bulb (max. approx.
18. Materials Flash (when using an external flash) Flash mode Auto / Auto/Red-Eye / Forced Flash On / Forced On/RedEye / Slow Sync. / Slow Sync./Red-Eye / Forced Flash Off Flash Equal to or smaller than 1/320 of a second¢ synchronisation ¢ The guide number decreases at 1/320 of a second, speed only during [S]/[M] modes Zoom Extra Tele Max. 2k¢ (when a picture size of [S] is selected.) Conversion ¢ Max. 1.
18. Materials External dimensions / Mass External dimensions Approx. 151.0 mm (W)k114.2 mm (H)k110.4 mm (D) (5.94q (W)k4.50q (H)k4.35q (D)) (excluding the projecting parts) Mass Approx. 1164 g/2.57 lb (with one card and the battery) Approx. 1052 g/2.
Index Numerics 1 Shot "6K/4K PHOTO" ..................... 372 1 Shot RAW+JPG.............................. 371 1 Shot Spot Metering......................... 371 1-Area (AF) ........................................ 113 1-Area AF Moving Speed .................. 403 1-Area+ (AF)...................................... 113 225-Area (AF).................................... 110 6K/4K Burst ....................................... 137 6K/4K Burst (S/S) .............................. 138 6K/4K burst file .............
Index Burst rate ........................................... 133 Burst Shot .......................................... 132 Burst Shot 1 Setting .......... 132, 136, 405 Burst Shot 2 Setting .......... 132, 136, 405 C Cable holder....................................... 330 Calendar screen................................. 355 Card ................................ 25, 48, 92, 574 Card Access Light....................... 49, 452 Card Format................................ 50, 444 Card Slot Change ............
Index Exposure Mode ......................... 249, 410 Exposure Offset Adjustment.............. 419 Extended ISO .................................... 419 External flash..................................... 228 External microphone.......................... 340 External monitor/external recorder .... 329 External TC Setting ........................... 269 Extra Tele Conversion ............... 128, 406 Eye cup.............................................. 572 Eye Sensor .......................................
Index HLG View Assist ....................... 314, 439 HLG View Assist (Monitor)................. 458 Hot shoe cover................................... 228 Hue .................................................... 213 I i.Dynamic Range................................ 399 I.S. Status Scope ............................... 437 Illuminated Button .............................. 429 Image Area of Video ................. 266, 412 Image Quality..................................... 213 Image Stabiliser ............
Index Monitor Frame Rate........................... 445 Monitor Settings................................. 446 Monochrome Live View ..................... 440 MOV .......................................... 255, 412 MP4 ........................................... 255, 412 Multi-metering .................................... 185 Multiple Exposure .............................. 408 Mute Sound Input ...................... 283, 413 My Menu ............................................ 387 N Network Address .......
Index Recording distance reference ............ 126 Recording mode................................... 63 Recording videos ............................... 242 Recording with Time Lapse Shot ....... 149 Red REC Frame Indicator.................. 441 Red-Eye Removal..................... 233, 404 Reduce Rolling Shutter ...................... 143 Register to Favourite (Wi-Fi connection) ........................................ 513 Registering to My List ........................ 265 Remaining Battery Level.......
Index T Tally Lamp ................................. 242, 442 Tethered Recording........................... 533 Thumbnail screen .............................. 354 Time Code ................................. 268, 412 Time Lapse Shot ....................... 149, 406 Time Lapse Video.............................. 459 Time Stamp Rec................................ 409 Time Zone ......................................... 454 Touch AE ............................................. 85 Touch AF ....................
Index X XLR Mic Adaptor Setting........... 343, 414 XLR Microphone Adaptor................... 343 Z Zebra Pattern ............................ 293, 440 Zone (AF)........................................... 111 Zoom..................................................
Trademarks and Licences 0 L-Mount is a trademark or registered trademark of Leica Camera AG. 0 SDXC Logo is a trademark of SD-3C, LLC. 0 The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo 0 0 0 0 0 0 0 0 0 0 are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum. The USB Type-CTM Charging Trident Logos are trademarks of USB Implementers Forum, Inc.
Trademarks and Licences 0 Final Cut Pro, Mac, OS X and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. 0 App Store is a service mark of Apple Inc. 0 Google, Android and Google Play are trademarks of Google LLC. 0 The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners.
Trademarks and Licences This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.