User Manual

16. Connecting to Other Devices
441
If you connect the camera to a printer that supports PictBridge, you can
select pictures on the camera’s monitor and then print them.
Getting started:
0 Turn on the camera and printer.
0 Set the print quality and other settings on the printer.
1
Display the playback screen.
≥Press [(].
0
Images are displayed separately by card
slot.
To switch the card to display, after
pressing [ ], press 34 to select
[Card Slot 1(XQD)] or [Card Slot 2(SD)],
and then press or .
0 You can also select the card to be displayed using the Fn button [Card Slot
Change] (l 284).
0 The card for printing cannot be changed after connecting to the printer.
2
Connect the camera and printer with the USB
connection cable (C–C or A–C).
0 Plug in/out straight holding onto the plug.
(Inserting these at an angle may cause deformation or malfunction)
0 Do not connect the cable to the wrong terminals. This may cause a
malfunction.
Printing