Basic Owner’s Manual Digital Camera Model No. DC-ZS70 Please read these instructions carefully before using this product, and save this manual for future use. More detailed owner’s manual is available in “Owner’s Manual for advanced features (PDF format)”. To read it, download it from the website. (→64) Register online at http://shop.panasonic.com/support (U.S. customers only) If you have any questions, visit: USA : http://shop.panasonic.com/support Canada : www.panasonic.
Dear Customer, Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information below. The serial number is on the tag located on the underside of your camera. Be sure to retain this manual as your convenient camera information source. Date of Purchase Dealer Phone No. Dealer Purchased From Model No.
Information for Your Safety WARNING: To reduce the risk of fire, electric shock or product damage, • Do not expose this unit to rain, moisture, dripping or splashing. • Use only the recommended accessories. • Do not remove covers. • Do not repair this unit by yourself. Refer servicing to qualified service personnel. The socket outlet shall be installed near the equipment and shall be easily accessible.
THE FOLLOWING APPLIES ONLY IN THE U.S.A. Certification and Compliance See Camera for the certification and compliance mark specific to that device. 1 Select [Wi-Fi] in the [Setup] menu 2 Select [Wi-Fi Setup] in the [Wi-Fi] 3 Press to select [Approved Regulations], and press [MENU/SET] Contains FCC ID : VPYLBXN604 This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
THE FOLLOWING APPLIES ONLY IN CANADA. Certification and Compliance See Camera for the certification and compliance mark specific to that device. 1 Select [Wi-Fi] in the [Setup] menu 2 Select [Wi-Fi Setup] in the [Wi-Fi] 3 Press to select [Approved Regulations], and press [MENU/SET] CAN ICES-3(B)/NMB-3(B) Contains IC : 772C-LBXN604 This device complies with Industry Canada’s licence-exempt RSSs.
■ About the battery pack CAUTION Battery pack (Lithium ion battery pack) • Use the specified unit to recharge the battery pack. • Do not use the battery pack with equipment other than the specified unit. • Do not get dirt, sand, liquids, or other foreign matter on the terminals. • Do not touch the plug terminals (+ and −) with metal objects. • Do not disassemble, remodel, heat or throw into fire. If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water.
■ About the AC adaptor (supplied) CAUTION! To reduce the risk of fire, electric shock or product damage, • Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. AC adaptor This AC adaptor operates on AC between 110V and 240V. But • In the U.S.A. and Canada, the AC adaptor must be connected to a 120V AC power supply only. • When connecting to an AC supply outside of the U.S.A.
• To clean your camera, remove the battery, the DC coupler (DMW-DCC11: optional) or a card, or disconnect the power plug from the outlet, and wipe with a soft, dry cloth. • Do not press the monitor with excessive force. • Do not press the lens with excessive force. • Do not allow camera to come into contact with pesticides or volatile substances (can cause surface damage or coating to peel). • Do not keep rubber or plastic products in contact with the camera for a long period of time.
• The battery is not charged when the camera is shipped. Charge the battery before use. • The battery is a rechargeable lithium ion battery. If the temperature is too high or too low, the operating time of the battery will become shorter. • The battery becomes warm after using and during and after charging. The camera also becomes warm during use. This is not a malfunction. • Do not leave any metal items (such as clips) near the contact areas of the power plug or near the batteries.
Contents ■ Information for Your Safety ...................... 3 Preparations ■ ■ ■ ■ ■ ■ Before use................................................ 12 Standard accessories ............................. 13 Names and Functions of Main Parts ..... 14 Inserting and removing the battery or SD memory card (optional)................ 16 Charging the battery ............................... 17 Setting the clock ..................................... 19 Basics ■ ■ Basic operations ...............................
Preparations Before use ■ Camera handling Keep the camera away from excessive vibration, force, or pressure. ● Avoid using the camera under the following conditions, which may damage the lens, monitor, viewfinder, or camera body. This may also cause the camera to malfunction or prevent recording.
Preparations Standard accessories Check that all the accessories are supplied before using the camera. Part numbers are as of May 2017. These may be subject to change. Battery pack DMW-BLG10PP • Charge the battery before use. • Battery pack is indicated as battery pack or battery in the text. AC adaptor SAE0012A USB connection cable K1HY04YY0106 Hand strap VFC4297 • Cards are optional. (SD Memory Card, SDHC Memory Card and SDXC Memory Card are indicated as card in the text.
Preparations Names and Functions of Main Parts 1 2 3 7 8 9 6 5 4 16 10 15 11 14 18 22 19 23 20 21 12 17 10 24 27 25 26 33 14 13 DVQX1222 (ENG) 32 31 30 29 28
Preparations 1 2 3 4 5 6 7 8 Shutter button (→21) Zoom lever (→22) Motion picture button (→38) Camera [ON/OFF] button (→19) Mode dial (→23) Stereo microphone (→20) Viewfinder (→20, 54) Diopter adjustment dial • Rotate the diopter adjustment dial to adjust until you are able to clearly see the characters displayed in the viewfinder. 9 Eye sensor (→20) 10 Strap eyelet • To prevent dropping, be sure to attach the supplied strap and fit it to your wrist.
Preparations Inserting and removing the battery or SD memory card (optional) Make sure that the camera is turned off. 1 Slide the release lever ( ) to the [OPEN] [OPEN] [LOCK] position and open the card/battery door 2 Insert the battery and card, making sure that their orientation is correct • Battery: Insert the battery all the way firmly and check that it is locked by lever ( ). • Card: Insert the card all the way firmly until it clicks. Do not touch the terminal.
Preparations Charging the battery • The battery that can be used with this unit is DMW-BLG10PP. • We recommend charging in a location where the ambient temperature is between 10 °C and 30 °C (50 °F to 86 °F). Make sure that the camera is turned off. 1 Insert the battery to this unit, and then connect this unit to the AC adaptor (supplied) ( ) or a PC ( ) USB connection cable (supplied) AC adaptor (supplied) To the electrical outlet Computer Getting ready: Turn on the computer.
Preparations ■ Charging lamp indications Charging lamp On: Charging in progress Off: Charging complete (After charging stops, disconnect the camera from the electrical outlet or your computer.) Flashing: Charging error (→57) ■ Notes on charging time When using the AC adaptor (supplied) Approx. 190 min. • The charging time indicated above is the time required for charging in case when the battery is completely used up. The time required for charging differs depending on conditions of battery usage.
Preparations Setting the clock The clock is not set when the camera is shipped. 1 Turn the camera on 2 Press [MENU/SET] 3 Press to select the language and press [MENU/SET] • The [Please set the clock] message appears. 4 Press [MENU/SET] to select the items (year, 5 Press month, day, hour, minute), and press to set 6 Press [MENU/SET] 7 When [The clock setting has been completed.
Basics Basic operations Holding the camera • Do not block the flash, AF Assist Lamp, microphone, or speaker with your fingers or other objects. Flash/AF Assist Lamp Microphone Speaker Adjusting the angle of the monitor • Be careful not to catch your finger, etc. in the monitor. • When rotating the angle of the monitor, be careful not to apply too much force. Doing so may cause damage or malfunction. (Open and close with your finger on point .
Basics ● When you open the monitor, the display automatically switches to monitor display, and the [LVF] button and eye sensor are disabled.
Basics Zoom lever (Use zoom) Capture a wider area (wide-angle)1 Enlarge the subject (telephoto)1 1 The zoom speed varies according to how far you rotate the lever. ■ Zoom types and use Optical Zoom: You can zoom in without degrading the picture quality. Maximum magnification: 30x Extended optical zoom: This function works when picture sizes with [ ] have been selected in [Picture Size].
Basics Mode dial (Select the recording mode) 1 Set to the desired recording mode • Rotate the mode dial slowly to select the desired mode. Intelligent Auto Mode (→28) Intelligent Auto Plus Mode (→28) Program AE Mode Take pictures with automatic shutter speed and aperture value settings. Aperture-Priority AE Mode Determine aperture, then take pictures. Shutter-Priority AE Mode Determine shutter speed, then take pictures. Manual Exposure Mode Determine aperture and shutter speed, then take pictures.
Basics Cursor button • Selection of items or setting of values etc., is performed. You can perform the following operations while recording. (Some items or settings cannot be selected depending on the mode or display style the camera is in.) [ ] (Exposure compensation) ( ) • Corrects the exposure when there is a backlight or when the subject is too dark or too bright. [ ] (Flash mode) ( ) • Changes flash mode.
Basics Control ring/Control dial You can use the control ring/control dial to change the settings for recording. Following are the pre-assigned settings.
Basics Function buttons • [Fn1] to [Fn4] are buttons on the camera. • [Fn5] to [Fn9] are touch icons. They are displayed by touching the [ ] tab on the recording screen. • You can assign frequently-used functions to particular buttons or icons with [Fn Button Set] (→47) in [Custom] menu. Touch screen (Touch operations) Touch screen of this unit is capacitive. Touch the panel directly with your bare finger. Touch To touch and release the touch screen. Be sure to touch the center of the desired icon.
Basics Setting the menu 1 Press [MENU/SET] to bring up the menu to select the menu item and press [MENU/SET] 2 Press to select the setting and press 3 Press [MENU/SET] • The setting methods vary depending on the menu item. 4 Press [Q.MENU/ ] button repeatedly until the recording or playback screen reappears • During recording, the menu screen can also be exited by pressing the shutter button halfway. ● The operations such as selecting menu items can also be made by rotating the control dial.
Recording Taking pictures with automatic settings (Intelligent Auto Mode) Recording mode: This mode is recommended for those who want to point and shoot as the camera optimizes settings to match the subject and recording environment. 1 Set mode dial to [ ] • The camera will switch to either the most recently used of Intelligent Auto Plus Mode [ ] or Intelligent Auto Mode [ ].
Recording [Self Shot] Recording mode: You can easily take pictures of yourself while looking at the screen. 1 Rotate the monitor as shown in the figure 2 Touch the item • You can record with the 4K Photo function ] (4K Selfie). When using by touching [ this function, only [Filter Select] can be selected. For details on how to record, refer to steps 2 - 3 of “Recording with the 4K Photo function”.
Recording ■ Changing the way the shutter is released In [Shutter], you can select the way you start recording without pressing the shutter button. We recommend that you avoid using the shutter button when, for example, jitter occurs during shutter operation. [ ] (Touch): This function enables you to focus and record still pictures simply by touching the subjects that appear on the screen.
Recording Taking pictures of yourself in Panorama Shot Mode By recording with Panorama Shot Mode, you can enjoy a variety of self-portraits, such as those with your friends or those incorporating a wide background.
Recording Recording with the 4K Photo function Recording mode: You can take burst pictures of approximately 8 million pixels with a burst rate of 30 fps. You can select and save a frame from the burst file. • To record pictures, use a UHS Speed Class 3 card. 1 Press [ ] button 2 Press to select the recording method and press [MENU/SET] [4K Burst] [4K Burst(S/S)] “S/S” is an abbreviation of “Start/Stop”.
Recording 3 Record a 4K photo • Burst pictures are saved as a single 4K burst file in the MP4 format. • When [Auto Review] is enabled, the picture selection screen will be displayed automatically. • You can compare multiple frames captured in a 4K burst file, overlay the bright areas, and combine them into one picture. ([Light Composition]) (→44) ■ To cancel the 4K Photo functions In step 2, select [ ].
Recording Selecting pictures from 4K burst file and saving 1 Select a picture with the [ ] on the playback screen, and press • In the case of recording with [ Burst]), proceed to the step 3. ] ([4K Pre- 2 Drag the slide bar to perform rough scene selection 3 Drag to select the frame you want to save as a picture • Touch [ ]/[ ] to display the previous or next set of frames (45) in slide view.
Recording Adjusting the focus after recording ([Post Focus] / [Focus Stacking]) Recording mode: You can record 4K burst pictures while changing the focus point and then select a focus point after recording. This function is best for non-moving subjects. You can select multiple focus points and combine them into one picture. ([Focus Stacking]) • To record pictures, use a UHS Speed Class 3 card. • We recommend using a tripod to perform [Focus Stacking].
Recording ● If the surrounding temperature is high or [Post Focus] recording is performed ] may be displayed and recording may be stopped halfway continuously, [ through. Wait until the camera cools down. ● During recording, the angle of view will be narrower.
Recording Select the focus range to combine and create a single picture ([Focus Stacking]) 1 Touch [ ] on screen in step 2 of “Select the focus point and save the picture ([Post Focus])” (→36) 2 Choose a stacking method and touch it [Auto Merging] Automatically select photos suitable for stacking and combine them into one picture. • Choose by giving preference to near-focus pictures. • Perform the focus stacking and save the picture.
Recording Recording Motion Picture/4K Motion Picture Recording mode: You can record full high-definition quality images that comply with the AVCHD standard, as well as motion pictures or 4K motion pictures recorded in MP4. 1 Press the motion picture button to start recording Elapsed recording time Remaining recording time Recording (flashes red) • Recording of motion picture appropriate for each motion picture mode is possible. • Immediately release the motion picture button after pressing it.
Recording ■ Setting the format, picture size and recording frame rate → [Motion Picture] → [Rec Format] Settings: [AVCHD] / [MP4] → [Motion Picture] → [Rec Quality] When [AVCHD] is selected: [FHD/28M/60p]1 / [FHD/17M/60i] / [FHD/24M/30p] ● [AVCHD] motion pictures: Files are split into smaller motion picture files for recording when the file size exceeds 4 GB.
Recording [4K Live Cropping] Recording mode: By cropping your motion picture down from the 4K angle of view to Full High Definition, you can record a motion picture that pans and zooms in/out while leaving the camera in a fixed position. • Hold the camera firmly in place while recording. • A motion picture will be recorded at [FHD/20M/30p] under [MP4]. Pan Zoom in • When you want to zoom in/out, set different angles of view for the cropping start and end frames.
Recording 3 Set the crop start frame and press Start [MENU/SET] to set • Set the crop end frame as well. • When making settings for the first time, a crop start frame of size 1920×1080 is displayed. • Move the frame by touching it or using the cursor button. You can adjust the frame size by pinching out/pinching in or rotating the control dial.
Playback Viewing your pictures 1 Press [ ] (Playback) button 2 Press to select a picture to be displayed ● By holding down [ ] (Playback) button while the camera is off, you can turn the camera on in playback mode. ● When [Lens Retraction] (→47) is set to [ON], the lens barrel is retracted after approx. 15 seconds as the camera is switched to the playback screen from the recording screen. ■ Viewing motion pictures This unit was designed to play motion pictures using the AVCHD and MP4 formats. ]).
Playback [Beauty Retouch] Apply aesthetic and makeup effects to faces in your pictures. → [Playback] → [Beauty Retouch] 1 Use 2 Press to select a still picture and press [MENU/SET] to select the face of the person to edit, and press [MENU/SET] • Only a person with an arrow can be selected. • If only one person is detected, press [MENU/SET].
Playback [Light Composition] Select multiple frames from 4K burst files that you wish to combine. Parts of the image that are brighter than the preceding frame will be superimposed on the preceding frame to combine the frames into one picture. • When using [Light Composition], we recommend using a tripod and taking pictures remotely by connecting the camera to a smartphone to prevent camera shake.
Playback to select the 4K burst files and press [MENU/SET] 1 Use 2 Choose the combining method and press [MENU/SET] ■ [Composite Merging]: Selecting frames to combine Drag the slide bar or use frames to combine to select the Press [MENU/SET] • The selected frames are remembered, and the display goes to the preview screen. to select items and press [MENU/SET] to perform the following • Use operations. – [Next]: Lets you select more frames for combining.
Menu Menu list ■ To display explanations of the menu items When [Menu Information] in the [Setup] menu is set to [ON], explanations of the menu items and settings are displayed on the menu screen. Explanations of the menu items and settings [Rec] [Photo Style]1 [Bracket] [Red-Eye Removal] [Filter Settings]1 [Self Timer] [ISO Limit Set] [i.Dynamic]1 [ISO Increments] [Picture Size] [i.
Menu 2 [Motion Picture] 2 Refer to the [Rec] menu for the menu items that are shared with the [Rec] menu. (→46) [4K Live Cropping] [Exposure Mode] [Flkr Decrease] [Snap Movie] [High Speed Video] [Silent Operation] [Rec Format] [Continuous AF] [Wind Noise Canceller] [Rec Quality] [Level Shot] [Zoom Mic] [Cust.Set Mem.] [MF Assist] [Rec Area] [Silent Mode] [MF Assist Display] [Remaining Disp.
Menu [Setup] [Online Manual] [Monitor Luminance] [Version Disp.] [Clock Set] [Economy] [Exposure Comp. Reset] [World Time] [USB Mode] [Self Timer Auto Off] [Travel Date] [TV Connection] [No.Reset] [Wi-Fi] [m/ft] [Reset] [Beep] [Menu Resume] [Reset Wi-Fi Settings] [Live View Mode] [Menu Background] [Level Gauge Adjust.] [Monitor Display]/ [Viewfinder] [Menu Information] [Demo Mode] [Language] [Format] [Slide Show] [Title Edit] [Rotate Disp.
Wi-Fi What you can do with the Wi-Fi® function ● Operating the camera by connecting it to a smartphone • • • • • • Taking pictures via a smartphone (→52) Playing back pictures in the camera on a smartphone (→52) Saving pictures in the camera to a smartphone Sending pictures in the camera to social networking services Adding location information to pictures in the camera from a smartphone Combining motion pictures recorded with Snap Movie according to your preference on a smartphone ● Displaying still pic
Wi-Fi Operating the camera by connecting it to a smartphone Installing the smartphone app “Panasonic Image App” The “Image App” is an application provided by Panasonic. Supported OS Installation procedure Android™: Android 4.1 or later iOS: iOS 8.0 or later Connect your device to a network (Android) Select “Google Play™ Store” (iOS) Select “App Store” Enter “Panasonic Image App” or “LUMIX” into the search box Select “Panasonic Image App” and install it • Use the latest version.
Wi-Fi Connecting to a smartphone You can easily establish a Wi-Fi connection on this unit without entering a password on your smartphone. (On the camera) → [Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection] → [Remote Shooting & View] • The information required for directly connecting your smartphone to this unit (SSID ( )) is displayed. • You can also display the information by pressing the function button that [Wi-Fi] function is assigned.
Wi-Fi Closing the connection 1 Set the camera to Recording Mode • Press the shutter button halfway to return to recording mode. 2 Select the camera’s menu items to terminate the Wi-Fi connection → [Setup] → [Wi-Fi] → [Wi-Fi Function] → [Yes] 3 On the smartphone, close “Image App” • For details on how to close the application, refer to the operating instructions of your device.
Others Downloading software Download and install software to edit and play back images with a PC. ● To download the software, your PC must be connected to the Internet. ● It may take time to download the software in some communication environments. ® PHOTOfunSTUDIO 9.9 PE (Windows 10 / 8.1 / 8 / 7) You can capture still pictures or motion pictures to your PC, or organize captured pictures by categorizing by recording date, model name of the digital camera used to record, etc.
Others List of monitor/viewfinder displays • The following images are examples of when the display screen is set to [ (monitor style) in the monitor.
Others [Quality] 240fps 120fps [High Speed Video] AFS [AFS/AFF/AFC]/MF [AF Mode] [Pull Focus] ([Snap Movie]) [Face Recog.] AFL AF Lock Burst Name2 Travel elapsed days3 Age in years/months2 Location3 Current date/time3 Travel destination setting3: Exposure meter Zoom (→22) [4K PHOTO] (→32) [Post Focus] (→35) [Self Timer] Remaining battery Macro recording (→24) [Level Shot] [Stabilizer] Jitter alert Recording state (Flashes red.) (→38)/ Focus (Lights green.
Others [Dial Guide] 98 RXXmXXs White Balance Bracket White Balance Fine Adjustment White Balance Coloring Number of recordable pictures Available recording time1 Function buttons (→26) Coloring Defocus control function Brightness (exposure) Type of defocus ([Miniature Effect]) [One Point Color] [Sunshine] Touch Shutter Picture effect (Filter) adjustment display Picture effects ON or OFF [Touch AE] Picture effects (Filter) [Peaking] Aperture value Touch tab Touch zoom Shutter speed [Self Shot] (
Others Q&A Troubleshooting • Performing [Reset] in the [Setup] menu may resolve the issue. • Further information is provided in the “Owner’s Manual for advanced features (PDF format)”. Check it together with the information in this section. The charging lamp blinks. • Charging is being performed in a place with extremely high or low temperature.
Others Striping or flicker may appear under lighting such as fluorescent lighting and LED lighting fixture. • This is characteristic of MOS sensors which serve as the camera’s pickup sensors. This is not a malfunction. • If you are taking still pictures using the electronic shutter, the striping may be reduced by setting a slower shutter speed.
Others Specifications Digital Camera: Information for your safety Power Source DC 8.4 V ( Power Consumption 1.9 W (When recording with monitor) 2.9 W (When recording with viewfinder) 1.6 W (When playing back with monitor) 1.6 W (When playing back with viewfinder) Camera effective pixels 8.4 V) 20,300,000 pixels Image sensor 1/2.3″ MOS sensor, total pixel number 21,100,000 pixels Primary color filter Lens Optical 30x zoom f=4.3 mm to 129 mm (35 mm film camera equivalent: 24 mm to 720 mm) Max.
Others Shutter speed Still picture: 30 seconds to 1/2000th of a second (When the mechanical shutter is used and [Artistic Nightscape] is selected as the Scene Guide Mode), 4 seconds to 1/2000th of a second (When the mechanical shutter is used, in cases other than the above), 1 second to 1/16000th of a second (When the electronic shutter is used) Motion picture: 1/2 second to 1/16000th of a second (When [Exposure Mode] is set to [M] in Creative Video Mode and [MF] is selected), 1/30th of a second to 1/16000
Others Microphones Stereo Speaker Monaural Recording media SD Memory Card/SDHC Memory Card/ SDXC Memory Card UHS- UHS Speed Class 3 Recording file format Still picture RAW/JPEG (based on Design rule for Camera File system, based on Exif 2.3 standard/DPOF corresponding) Motion picture AVCHD Progressive/AVCHD/MP4 Audio compression AVCHD: Dolby Audio™ (2 ch) format MP4: AAC (2 ch) Interface [HDMI] Micro HDMI Type D [USB/CHARGE] USB 2.0 (High Speed) Micro-B Dimensions Approx. 112.
Others ■ Wi-Fi Compliance standard IEEE 802.11b/g/n (standard wireless LAN protocol) Frequency range used (central frequency) 2412 MHz to 2462 MHz (1 to 11 ch) Encryption method Wi-Fi compliant WPA™/WPA2™ Access method Infrastructure mode ■ AC adaptor (Panasonic SAE0012A): Information for your safety Input: 110 V – 240 V Output: 5V 50/60 Hz 0.2 A 1.0 A ■ Battery pack (lithium-ion) (Panasonic DMW-BLG10PP): Information for your safety Voltage/capacity: 7.
Others Digital Camera Accessory System Battery pack DMW-BLG10 The battery pack can be charged from the camera using the AC adaptor (supplied). AC adaptor DMW-AC10 By using the AC adaptor (DMW-AC10: optional) and DC coupler (DMW-DCC11: optional), you can record and play back without worrying about the remaining battery charge. • The AC adaptor (optional) can only be used with the designated Panasonic DC coupler (optional). The AC adaptor (optional) cannot be used by itself.
Others Reading the Owner’s Manual (PDF format) More detailed operating instructions are available in “Owner’s Manual for advanced features (PDF format)”. To read it, download it from the website. http://panasonic.jp/support/dsc/oi/index.html?model=DC-ZS70&dest=P • Click the desired language. ■ Confirming URLs and QR codes with the camera → [Setup] → [Online Manual] Settings: [URL display] / [QR Code display] • The URL or QR code will be displayed on the camera monitor.
Others Limited Warranty (ONLY FOR U.S.A.
Others Mail-In Service--Online Repair Request Online Repair Request To submit a new repair request and for quick repair status visit our Web Site at http://shop.panasonic.com/support. When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.
Others THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.
Others for all your Panasonic gear Go to http://shop.panasonic.com/support Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Batteries, Backup Chargers & more… Customer Services Directory For Product Information, Operating Assistance, Parts, Owner’s Manuals, Dealer and Service info go to http://shop.panasonic.
Others Limited Warranty (ONLY FOR CANADA) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc.
Others LIMITATIONS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc.
● SDXC Logo is a trademark of SD-3C, LLC. ● The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. ● HDAVI Control™ is a trademark of Panasonic Corporation. ● “AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive” logo are trademarks of Panasonic Corporation and Sony Corporation. ● Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 http://shop.panasonic.com Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 www.panasonic.
