Operating Instructions

DVQX2052 (ENG)

2. Getting Started

Attaching a Lens

• Make sure that the camera is turned off.

• Change the lens in a location where there is not a lot of dirt and dust.

• When attaching or detaching the interchangeable lens (H-FS12032/H-

FS35100), retract the lens barrel.

Align the lens fitting marks on the lens and camera and

then rotate the lens in the direction of the arrow.

● Attach the lens by rotating it until it clicks.

• Insert the lens straight in.



Removing a Lens

Set the camera on/off switch to [OFF].

While pressing the lens release button ,

rotate the lens in the direction of the arrow

until it stops and then remove it.

• After removing the lens, be sure to attach the body cap and the lens rear

cap.