Operating Instructions

442
15. Connecting to Other Devices

Copying Images to a PC Using “PHOTOfunSTUDIO”
Getting started:
• Turn on the camera and PC.
• Install “PHOTOfunSTUDIO” on PC. (442)
Connect the camera and PC with the USB connection cable. (435)
Press to select [PC(Storage)] and then press .
Copy images to the PC using “PHOTOfunSTUDIO”.
• Do not delete or move the copied files and folders in, for example, Windows
Explorer.
Playback and editing using “PHOTOfunSTUDIO” will become no longer
possible.
• If [USB Mode] is set to [PC(Storage)] in the [Setup] menu, the camera will
be automatically connected to the PC without the [USB Mode] selection
screen being displayed. (359)
• Take care not to turn off the camera while images are being imported.
• After importing of the images is completed, perform the operation to safely
remove the USB connection cable on the PC.
• Turn off the camera and disconnect the USB connection cable before
removing the card from the camera. Otherwise, the recorded data may be
damaged.
Installing Software
Install the software to perform operations such as organizing and
correcting recorded images, processing RAW images, and editing videos.
• To download the software, your PC needs to be able to connect to the
internet.
• Supported OS versions as of June 2020. Supported OS versions may be
changed without prior notice.