Operating Instructions
Table Of Contents
- About Operating Instructions
- Chapters
- Contents
- Contents by Function
- 1. Introduction
- 2. Getting Started
- 3. Basic Operations
- 4. Recording mode
- 5. Image Recording
- 6. Focus/Zoom
- 7. Drive/Shutter/Image Stabilizer
- Selecting the Drive Mode
- Taking Burst Pictures
- 4K Photo Recording
- Selecting Pictures from a 4K Burst File
- Post-Focus Recording
- Recording Using the Self-timer
- Recording with Time Lapse Shot
- Recording with Stop Motion Animation
- Time Lapse Shot/Stop Motion Animation Videos
- Bracket Recording
- [Silent Mode]
- [Shutter Type]
- Image Stabilizer
- 8. Brightness (Exposure)/Coloring/Picture effect
- 9. Flash
- 10. Recording Videos
- 11. Playing Back and Editing of Images
- 12. Camera Customization
- 13. Menu Guide
- 14. Wi-Fi/Bluetooth
- 15. Connecting to Other Devices
- 16. Materials
- Using Optional Accessories
- Monitor/Viewfinder Displays
- Message Displays
- Troubleshooting
- Cautions for Use
- Number of Pictures That Can Be Taken and Available Recording Time with the Battery
- Number of Still Images That Can Be Taken and Video Recording Time with Cards
- List of Functions That Can Be Set in Each Recording Mode
- Specifications
- Index
- Trademarks and Licenses
- Firmware Update
481
16. Materials
AC Adaptor
• The [CHARGE] light may blink under the influence of static electricity or
electromagnetic wave, depending on the charging environment. This phenomenon
has no effects on charging.
• If you use the AC adaptor near a radio, the radio reception may be disturbed.
Keep the AC adaptor 1 m (3.3 feet) or more away from radio.
• During usage, the AC adaptor may emit an electrical hum; this is not a malfunction.
• After use, be sure to disconnect the power plug from the electrical outlet.
(A very small amount of current is consumed if it is left connected.)
Card
Do not leave the card in areas with high temperatures, direct
sunlight, or areas prone to electromagnetic waves and static.
Do not bend or drop the card.
Do not subject the card to strong vibration.
• Otherwise, the card and recorded data may be damaged.
• Put the card in the card case or the storage bag after use and when storing or
carrying the card.
• Do not allow dirt, water or other foreign objects to get into the contacts on the card.
Additionally, do not touch the contacts with your hands.