Operating Instructions

Focus / Zoom – Using AF

164

[SET]

1 Use the same procedure as MF (Record Using MF: 197) to check the

focus, then press [WB] or [ISO] to set the range of operation for AF.

• This can also be set by touching [Limit1]/[Limit2].

• [Limit1]/[Limit2] can be set from either.

2 Press or to confirm the setting.

• Press [DISP.] to return the operation range to the default setting.

• This can be set when using a lens with a focus ring or a focus lever.

• It cannot be set if the focusing distance range selector switch of the lens has

been used to limit the operation range.

• The setting values are reset when the lens is replaced.

• When [Focus Limiter] is working, [ ]/[ ] is displayed on the screen.

• When the following function is being used, [Focus Limiter] is not available:

– [AF+MF]

∞

10(m) 5 3 2 1.5 1 0.5 0.1

1 2

Limit1

Limit2

ISO