Operating Instructions
Metering / Exposure / ISO Sensitivity – Exposure Compensation
298
• In [M] mode, you can compensate the exposure by setting the ISO sensitivity to
[AUTO].
• When the exposure compensation value falls below or exceeds ±3 EV, the
brightness of the recording screen will no longer change.
Press the shutter button halfway or use AE Lock to reflect the value on the
recording screen.
• The set exposure compensation value is stored even if you turn off the camera.
• The standard value for standard exposure can be adjusted:
([Exposure Offset Adjust.]: 560)
• You can set the exposure compensation value to be reset when the camera is
turned off:
([Exposure Comp. Reset]: 562)
• You can change the operation of the [ ] button:
([WB/ISO/Expo. Button]: 572)
• Exposure Bracket can be set and flash output can be adjusted on the exposure
compensation screen:
([Exposure Comp. Disp. Setting]: 572)
• You can assign the function that matches the aperture value and shutter speed to
the standard exposure to an Fn button:
([One Push AE]: 533)