Operating Instructions
Firmware Ver. 2.0 – Support for Output of RAW Video Data
F-5
• For external recorder firmware versions that support recording of RAW Video Data,
check the following site:
https://panasonic.jp/support/global/cs/dsc/connect/index.html
(English only)
• For details about external recorders, contact either ATOMOS or Blackmagic Design.
• This does not guarantee all of the capabilities that the compatible external recorder
may have.
• You will need compatible software to edit the RAW Video Data recorded with the
external recorder.
• When editing RAW video data that was recorded with an ATOMOS recorder, in order
to match the coloring with the V-Log/V-Gamut, download the LUT (Look-Up Table)
file from the following support site and load it into the software.
• Visit the following site to download LUT file or view the latest support information:
https://panasonic.jp/support/global/cs/dsc/
(English only)
• Video cannot be recorded to cards while RAW Video Data is being output via
HDMI.
• When [System Frequency] is set to [24.00Hz (CINEMA)], RAW Video Data
cannot be output via HDMI.
• When the [Rec Quality] is set to 5.7K/60p (50p) or C4K/120p (100p) and
recording to a Blackmagic Design recorder, it is recommended to set the codec
quality on the recorder to the following:
– When recording to an SSD: constant bitrate 5:1 or less
– When recording to an SD card: constant bitrate 8:1 or less