Operating Instructions

Table Of Contents
Firmware Ver. 2.2
F-26
Sets the amount of movement for focusing using the focus ring. (When using supported
lenses)
¢ It can also be assigned in the Quick Menu ([CUSTOM]).
Additions/Changes to Other Functions
[Focus Ring Control] Has Been Added to the [Custom] menu
> [Custom] > [Lens / Others] > [Focus Ring Control]
[NON-LINEAR]
Focus responds by accelerating according to rotation speed of the focus
ring.
[LINEAR]
Focus responds at a constant amount according to the rotational angle of
the focus ring.
When using lenses equipped with focus clutch mechanisms, set the lens
to AF and the camera to MF.
[SET]
Sets the rotational angle of the focus ring for when [LINEAR] is selected.
[90°] to [1080°]/[Maximum]
Angles that cannot be set with the attached lens are not displayed.
For information on lenses that support focus ring control, refer to the following support site:
https://panasonic.jp/support/global/cs/dsc/connect/index.html
(English only)
Items That Can Be Assigned to the Function Buttons Have Been Added
> [Custom] > [Operation] > [Fn Button Set] >
[Setting in REC mode]
[Focus Ring Control]
¢
MENU
MENU