Operating instructions

Preparation/Basic

(ENG) DVQX1359

Assigning frequently used functions to the

buttons (function buttons)

You can assign recording functions, etc. to specific buttons and icons.

1 Select the menu.

2 Press 3/4 to select the function button you want to

assign a function to and then press [MENU/SET].

• To select a button from [Fn12] to [Fn20] in [Setting in REC

mode], press [DISP.] to switch the screen.

3 Press 3/4 to select the function you want to assign

and then press [MENU/SET].

• Some functions cannot be assigned depending on the function

button.

• Touching [Fn] on the on-monitor recording information screen (P22) also allows you to display

the screen in step

• If you press and hold a function button (any of [Fn1] to [Fn6] or [Fn12] to [Fn20]) for 2 seconds,

the screen displayed in step

3 can be displayed.

In some cases, however, the screen cannot be displayed depending on the currently selected

mode or the currently displayed screen.

• By default, [Off] is assigned to the buttons [Fn10] to [Fn20].

• With [Video Record], you can start/stop recording a motion picture in the same way as with the

motion picture button.

• When set to [Focus Area Set], it is possible to display the position setting screen of either AF

area or MF Assist.

• When [1 Shot RAW+JPG] is set, it will record the RAW file and a fine JPEG image

simultaneously once only. It will return to original quality after recording.

• When [1 Shot Spot Metering] is set, it will record with [Metering Mode] set to [ ] (spot) once

only. It will return to original Metering Mode after recording.

• When [1 Shot "4K PHOTO"] is set, recording is performed in a specified 4K Photo Mode only

once. After the recording has finished, the camera returns to normal state.

• When [Operation Lock] is set, a certain type of operation is disabled. Set the type of operation

to be disabled in [Operation Lock Setting] in the [Custom] ([Operation]) menu.

• [Destination Slot] is available only when [Double Slot Function] is set to [Relay Rec].

• If you assign [Rec / Playback Switch], you can switch between recording and playback modes.

> [Custom] > [Operation] > [Fn Button Set] > [Setting in

REC mode]/[Setting in PLAY mode]

DC-GH5SMST-DVQX1359_eng.book 27 ページ２０１７年１２月４日　月曜日　午前１０時７分