Operating instructions

Recording

DVQX1359 (ENG)

∫ Setting Pre-Burst Recording ([4K Burst]/[4K Burst(S/S)])

The camera starts recording approximately 1 second before the shutter button is pressed

fully, so you will not miss a photo opportunity.

• Auto Focus operation settings and menus that cannot be set while this function is in use are the

same as those during [4K Pre-Burst] operation.

∫ Setting Loop Recording ([4K Burst(S/S)])

You can perform recording while deleting the oldest recorded data, allowing you to keep

on recording while waiting for a photo opportunity without replacing the card.

• Once you start recording, the 4K burst file will be recorded and divided approximately every

2 minutes.

Approximately the last 10 minutes (up to approximately 12 minutes) will be saved. The

preceding part will be deleted.

1 Select an image with the [ ] icon on the playback screen, and

press 3.

• If the image was recorded with [4K Pre-Burst], proceed to step 3.

2 Drag the slide bar to make a rough selection of

scenes.

• If the image was recorded with [4K Burst] or [4K Burst(S/

S)], you can select its scenes on the 4K burst playback

screen by touching [ ] (Fn1).

3 Drag the frames to select the frame you want to save

as a picture.

• To continuously rewind/forward frame-by-frame, touch and

hold [ ]/[ ].

4 Touch [ ] to save the picture.

• A confirmation screen will be displayed.

• The picture will be saved in JPEG format.

> [Rec] > [4K PHOTO] > [Pre-Burst Recording]

> [Rec] > [4K PHOTO] > [Loop Recording(4K PHOTO)]

Selecting pictures from 4K burst file and saving

Fn2

Fn1

DC-GH5SMST-DVQX1359_eng.book 42 ページ２０１７年１２月４日　月曜日　午前１０時７分