Operating instructions

61
Recording
(ENG) DVQX1359
– Changing the frame rate of [Rec Quality] from 59.94p/59.94i/29.97p to 23.98p
– Changing the frame rate of [Rec Quality] from 23.98p to 59.94p/59.94i/29.97p
– Changing the setting of [Count Up], [Time Code Value] or [Time Code Mode] in [Time Code]
Applicable modes:
When [Photo Style] is set to [Like709], you can adjust the knee so that recording can be
performed with minimum white saturation.
1 Select the menu.
2 Press 2/1 to select [Like709] and then press [Fn2].
3 Press 2/1 to select the Knee Mode setting, and press [MENU/SET].
Applicable modes:
You can perform log recording by setting [Photo Style] to [V-Log L]. It allows you to create
images finished with rich gradation through post production editing.
1 Select the menu.
2 Press 2/1 to select [V-Log L] and then press [MENU/SET].
• The recording screen and images output via HDMI will appear darker overall.
• LUTs (Look-Up Tables) can be used for post-production editing. You can download LUT data
from the support site below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
• Even if you disconnect the BNC cable, the camera will remain in slave state.
• Perform one of the following operations to release the camera from the slave state.
– Operating the camera on/off switch
– Switching the Recording Mode
– Changing the [System Frequency]
– Setting the [Variable Frame Rate]
Recording with minimum white saturation by compressing
overexposed portions (Knee)
> [Motion Picture] > [Photo Style]
[AUTO] Adjusts the compression level of overexposed portions automatically.
[MANUAL]
Allows you to adjust the master knee point and master knee slope
manually.
Press 3/4 to select the items, and then press 2/1 to adjust.
[POINT] (master knee point), [SLOPE] (master knee slope)
[Off] s
Log recording (V-Log L)
> [Motion Picture] > [Photo Style]
MENU
MENU
DC-GH5SMST-DVQX1359_eng.book 61 ページ ２０１７年１２月４日 月曜日 午前１０時７分