Operating instructions

Recording

(ENG) DVQX1359

∫ Setting the range within which the stereo shotgun microphone (DMW-MS2:

optional) will record sounds

1 Attach the dedicated stereo shotgun microphone to this unit, and then turn this

unit on.

2 Select the menu.

• This item is available only when using a stereo shotgun microphone.

3 (When [MANUAL] is selected)

Press 2/1 to select a range, and press [MENU/SET].

• When the external microphone is connected, [Sound Rec Level Disp.] is automatically set to

[ON], and the sound recording level is displayed on the screen.

• When a stereo microphone (VW-VMS10: optional) is used, [Special Mic.] is fixed to [STEREO].

• When [Special Mic.] is set to [LENS AUTO], [S.SHOTGUN] or [MANUAL], [Sound Output] in

the [Motion Picture] menu is fixed to [REC SOUND].

• For details, refer to the operating instructions of the external microphone.

By attaching an XLR microphone adaptor (DMW-XLR1: optional) to the camera, you can

use a commercially-available XLR microphone to enable the recording of superior-quality

high-res/stereo sound.

Preparations:

• Turn this unit off.

• Remove the hot shoe cover that is attached to the camera. (P52)

> [Motion Picture] > [Special Mic.]

[STEREO]

Allows stereo recording of sound over a wide area.

[LENS AUTO]

Allows recording within the range that is set automatically according

to the angle of view of the lens.

[SHOTGUN]

Allows recording from one direction by shutting out background and

surrounding noise.

[S.SHOTGUN]

Allows recording within the range even narrower than that of

[SHOTGUN].

[MANUAL] Allows recording within the range you set manually.

XLR Microphone Adaptor (optional)

A Hot shoe B XLR microphone adaptor (DMW-XLR1: optional)

C Commercially available XLR microphone

DC-GH5SMST-DVQX1359_eng.book 73 ページ２０１７年１２月４日　月曜日　午前１０時７分