Operating instructions

Recording

DVQX1359 (ENG)

∫ Setting the sampling frequency

1 Attach the XLR microphone adaptor to the hot shoe of this unit, and then turn

this unit on.

2 Select the menu.

• This item is available only when using an XLR microphone adaptor.

• The set sampling frequency is also applied to the sound output via HDMI. With [Sound

Down Convert] in [HDMI Rec Output], you can down-convert the sound output via HDMI.

(P72)

• For details, refer to the operating instructions of the XLR microphone adaptor.

You can record motion pictures while hearing the sounds that are being recorded by

connecting a commercially available headphones to this unit.

∫ Adjusting the headphone volume

1 Select the menu.

2 Connect headphones, and rotate the control dial while the recording screen is

displayed or a motion picture is being played back.

• You can also adjust the volume by touching [ ] or [ ] during playback.

> [Motion Picture] > [XLR Mic Adaptor Setting]

[96kHz/24bit] Records high-res sound at 96 kHz/24bit.

Only available when [Rec

Format] is set to [MOV].

[48kHz/24bit] Records high-quality sound at 48 kHz/24bit.

[48kHz/16bit] Records standard-quality sound at 48 kHz/16bit.

[OFF] Records sound using the built-in microphone.

Headphone

> [Custom] > [Operation] > [Dial Set.] >

[Control Dial Assignment] >[]

: Reduce volume level : Increase volume level

DC-GH5SMST-DVQX1359_eng.book 74 ページ２０１７年１２月４日　月曜日　午前１０時７分