Operating Instructions
Special Video Recording – Log Recording
434
Reading LUT Files
1 Insert a card on which LUT data is saved into the camera.
2 Select [Read LUT File].
• ¨ [ ] ¨ [ ] ¨ [V-Log View Assist] ¨ [Read LUT File] ¨ [Card Slot
1(CFexpress)]/[Card Slot 2(SD)]
3 Press 34 to select the LUT data to read and then press or .
4 Press 34 to select the location to register the data, and then press or
.
• When registered items are selected, they will be overwritten.
• The following LUT data can be used:
– The “.vlt” format, which meets the requirements specified in the “VARICAM
3DLUT REFERENCE MANUAL Rev.1.0”
– The “.cube” format
• The “.cube” format LUT files are compatible with 17 point and 33 point 3D LUT.
• The number of characters that can be used in a file name differs depending on
the file system of the card.
(Use alphanumeric characters for the file name)
FAT32 (SD card/SDHC card): Up to 8 characters (excluding extension).
exFAT (CFexpress card/SDXC card): Up to 255 characters (including
extension).
• Save the LUT data with a file extension of “.vlt” or “.cube” in the root directory of
the card (the folder opened when the card is opened on a PC).