Operating Instructions

Getting Started – Charging the Battery

 Removing the Battery

1 Set the camera on/off switch to [OFF].

2 Open the battery door.

3 Push the lever (E) in the direction of the arrow and then remove the battery.

• Check that the card access lights are off before removing the battery. (ÎCard

Access Indications: 62)

• Ensure that no foreign objects are adhering to the inner side (rubber seal) of the

battery door.

• Remove the battery after use.

(The battery will drain if left inserted in the camera for a long period of time.)

• The battery becomes warm after use, during charging, and immediately after

charging.

The camera also becomes warm during use. This is not a malfunction.

• Be careful when removing the battery as the battery will jump out.

(E)