Operating Instructions

Materials – Troubleshooting
733
Recording
Recording stops before finishing. Cannot record. Cannot use
some functions.
•
The temperature of the camera or card rises more readily in the following
circumstances: when the ambient temperature is high; and during continuous use
such as when recording high-definition video, taking burst pictures at high speed, or
outputting via HDMI.
When the temperature of the camera or card rises, [ ] appears blinking on the
screen. If you continue to use the camera, a message indicating that the camera or
card cannot be used is displayed on the screen and recording and HDMI output will
be stopped. Wait for the camera or card to cool down and for the message indicating
that they can be used again. When the message indicating that they can be used
again is displayed, turn the camera off then on again.
* When recording with the camera mounted on a tripod, etc., you can set the
temperature at which recording is stopped to a higher temperature. (Î[Thermal
Management]: 595)
Cannot record images. The shutter will not operate immediately
when the shutter button is pressed.
•
If [Focus/Shutter Priority] is set to [FOCUS], then recording will not take place until
focus is achieved. (Î[Focus/Shutter Priority]: 552)
The recorded image is whitish.
•
Images may look whitish when the lens or image sensor gets dirty with fingerprints or
similar.
If the lens is dirty, turn the camera off, then wipe the lens surface with a soft, dry
cloth.
For information about how to clean the image sensor (ÎDirt on the Image Sensor:
751)