Operating Instructions

Firmware Ver. 2.0 – Support for Output of RAW Video Data
F-6
Outputting RAW Video Data via HDMI
[HDMI RAW Data Output] has been added to the [Video] menu. The image
quality for the output images is set in [Rec Quality].
Getting started:
1 Turn off the camera and the external recorder.
2 Connect the camera and the external recorder with a commercially available
HDMI cable.
• Use an Ultra High Speed HDMI cable (Type A –Type A plug, up to 1.5 m
(4.9 feet) long).
3 Turn on the camera and the external recorder.
1
Set the mode dial to [ ].
2
Set [HDMI RAW Data Output].
≥ ¨ [] ¨ [] ¨ [HDMI RAW Data Output] ¨ [ON]
•
[HDMI RAW] is displayed on the recording screen.