Operating Instructions

Firmware Ver. 2.0 – Support for Output of RAW Video Data
F-9
• Bit value: 12-bit
• Audio format: LPCM (4ch)
– When the XLR Microphone Adaptor (DMW-XLR1: optional) is connected, if [4ch
Mic Input] is set to [ON], 4-channel audio can be recorded.
– Even if [4ch Mic Input] is set to [OFF], 4 channels are recorded to the audio tracks
of the video.
• [Image Area of Video] is fixed to the image area according to the [Rec Quality]
setting.
• [Sound Rec Quality] can be set to [96kHz/24bit] when you have connected an XLR
Microphone Adaptor (DMW-XLR1: optional), Stereo Shotgun Microphone
(DMW-MS2: optional), or Stereo Microphone (VW-VMS10: optional).
 Monitor/Viewfinder Display When Outputting RAW Video
Data
Images equivalent to those recorded when recording with V-Log are
displayed on the monitor/viewfinder of the camera for monitoring purposes.
[LUT View Assist (Monitor)] with the [Vlog_709] preset applied can be used
for the [V-Log View Assist].
•
The LUT for the monitor display cannot be changed.
• When you use [LUT View Assist (Monitor)], [709] is displayed on the screen and
[RAW] is displayed on the screen as a [LUT View Assist (HDMI)] item.
• [Luminance Spot Meter], and [BASE/RANGE] of [Zebra Pattern] are set at “Stop”
units.
(Calculated as “0 Stop”=42 % (IRE))