Operating Instructions

Firmware Ver. 2.0 – Support for Output of RAW Video Data
F-10
Notes on displayed images
•
The images displayed on the camera do not affect the RAW Video Data that is
output.
• The images displayed on the external recorder are images that suit the external
recorder specifications. This means that there may be differences between the
images displayed on the camera and the images displayed on the external recorder.
• The monitor/viewfinder of the camera shows images with the angle of view of the
RAW Video Data. There may be some difference with the angle of view of the data
recorded on the external recorder.
 [HDMI Time Code Output]/[HDMI Recording Control]
The time code of the camera can be added and output via HDMI to the
external recorder.
In addition, recording can be started and stopped on the external recorder
by using the video rec. button and shutter button of the camera.
1 Set [HDMI Time Code Output] to [ON].
• ¨ [ ] ¨ [ ] ¨ [Time Code] ¨ [HDMI Time Code Output] ¨ [ON]
2 Set [HDMI Recording Control] to [ON].
• ¨ [ ] ¨ [ ] ¨ [HDMI Rec Output] ¨ [HDMI Recording Control]
¨ [ON]
• [HDMI Recording Control] can be set when [HDMI Time Code Output] is set to
[ON] in [ ] mode.