Operating Instructions

Firmware Ver. 2.2 – Support for External USB Drive (SSD)
F-29
• When the temperature of the camera rises when recording over long periods to an
external SSD, for example, [ ] appears blinking on the screen. If you continue to
use the camera, a message indicating that the camera cannot be used is displayed
on the screen and recording and HDMI output will be stopped. Wait for the camera to
cool down and for the message indicating that the camera can be used again. When
the message indicating that it can be used again is displayed, turn the camera off
then on again.
• The camera cannot access the external SSD if the external SSD is protected by a
password, etc. Check the settings of the external SSD before use.
• Do not use USB extension cables, USB conversion adaptors, or USB hubs.