Operating Instructions
Firmware Ver. 2.3 – Models Supporting Output of RAW Video Data Have Been Added
F-52
• Video cannot be recorded to cards while RAW Video Data is being output via
HDMI.
• When [System Frequency] is set to [24.00Hz (CINEMA)], RAW Video Data
cannot be output via HDMI.
• RAW Video Data output via HDMI is not available when the optional
DMW-BLF19 battery is being used.
• When the [Rec Quality] is set to 5.7K/60p (50p) or C4K/120p (100p) and
recording to a Blackmagic Design recorder, it is recommended to set the codec
quality on the recorder to the following:
– When recording to an SSD: constant bitrate 5:1 or less
– When recording to an SD card: constant bitrate 8:1 or less
• Refer to “Outputting RAW Video Data via HDMI” in “Firmware Ver. 2.0” for
operations and limitations for RAW Video Data output.