Operating Instructions
Firmware Ver. 2.3 – Support for 4K/120p (4K/100p) HDMI Output
F-55
Power Save Live View Setting Has Been Added
When outputting C4K/120p (100p) or 4K/120p (100p) via HDMI, activation
of the image sensor is limited during recording standby to reduce power
consumption and keep the temperature from rising.
•
This can be set when [HDMI Recording Control] and [4K/120p Output] ([4K/100p
Output]) are [ON].
[] [] [HDMI Rec Output] Select [4K/120p Power
Save Live View] ([4K/100p Power Save Live View])
[ON]
Activation of the camera’s image sensor is limited to C4K/60p (50p) or 4K/60p (50p)
during recording standby.
The limitation is canceled when recording is started by pressing either the video rec.
button or shutter button on the camera.
• The output destination device recognizes as C4K/120p (100p) or 4K/120p (100p),
but if the recording is started on the external recorder during recording standby,
recording is made with a limited image quality, so use the camera to perform the
operations for starting and stopping video recording on the external recorder.
(Outputting Control Information to an External Recorder: 472)
[OFF]
Output stays C4K/120p (100p) or 4K/120p (100p) via HDMI even during recording
standby.
• The camera is released from the time code slave state when you use the [4K/
120p Power Save Live View] ([4K/100p Power Save Live View]) function.